A method of ultrafine macro-homogeneous composite powder – B4C–ZrO2 production using a planetary mill was developed. From the macro-homogeneous composite high-density ceramics, B4C–ZrB2 was produced by the method of reactive sintering (in situ) at 2000°C under the pressure of 41–42 MPa. The effect of ZrO2 grain size and of its distribution in the matrix on the consolidation parameters, and the microstructure of the obtained ceramics was studied.
BairamashviliIrakliGalustashviliMakvalaJobavaJondoComposite ceramics based on boron carbide enriched in isotope 11B as a promising radiation-resistant structural material. Nano Studies. 2013; 8:305–310.
2.
MestvirishviliZviadiBairamashviliIrakliKvatchadzeVakhtangThermal and mechanical properties of B4C-ZrB2 ceramic composite. J Mater Sci Eng B. 2015; 5(9-10):385–393. doi:10.17265/2161-6221/2015.9-10.007.
3.
МакаренкоГНКосолаповаТЯМарекЭВ. Износостойкие высокотемпературные материалы на основе карбида бора. Тугоплавкие бориды и силициды. Киев. Наукова думка. 1977: Ст.92–97.
4.
МЕТОДЫ ПОЛУЧЕНИЯ НАНОРАЗМЕРНЫХ МАТЕРИАЛОВ. Уральский государственный университет им. А.М. Горького. Екатеринбург, 2007.
5.
BakshiSRMusaramthotaVLahiriDSpark-plasma-sintered tantalum carbide: effect of pressure and nano-boron carbide addition on microstructure and mechanical properties. Mater Sci Eng A. 2011; 528:1287–1295. doi: 10.1016/j.msea.2010.10.009
6.
KendallK.Problems of particle aggregation in ceramics. J Eur Ceram Soc. 2012; 32:2589–2596. doi: 10.1016/j.jeurceramsoc.2011.11.008
7.
BalakrishnanaAPizettePMartinaCLEffect of particle size in aggregated and agglomerated ceramic powders. Acta Mater. 2010; 58(3):802–812. doi: 10.1016/j.actamat.2009.09.058
8.
MoshtaghiounBMOrtizALGómez-GarcíaDToughening of super-hard ultrafine-grained B4C densified by spark-plasma sintering via SiC addition. J Eur Cer Soc. 2013; 33:1395–1401. doi: 10.1016/j.jeurceramsoc.2013.01.018
9.
SubramanianCRoyTKMurthyTSRCEffect of zirconia addition on pressureless sintering of boron carbide. Ceram Int. 2008; 34:1543–1549. doi: 10.1016/j.ceramint.2007.04.017
10.
ShcherbakovVAGryadunovANAlymovMI.Microstructural features of SHS-pressing ZrB2B4C and TiB2B4C composites. Lett Mater. 2019; 9(1):11–16. doi: 10.22226/2410-3535-2019-1-11-16
ZhangLVerweijH.Homogeneous doping of ceramics by infiltration–gelation. J Eur Ceram Soc. 2010; 30:3035–3039. doi: 10.1016/j.jeurceramsoc.2010.07.009
14.
FotoohiBBlackburnS.Effects of mechanochemical processing and doping of functional oxides on phase development in synthesis of cordierite. J Eur Ceram Soc. 2012; 32:2267–2272. doi: 10.1016/j.jeurceramsoc.2012.02.015
15.
ZhangaGJAndoMYangJFBoron carbide and nitride as reactants for in situ synthesis of boride-containing ceramic composites. J Eur Ceram Soc. 2004; 24:171–178. doi: 10.1016/S0955-2219(03)00607-1
16.
RanSHuangSGVan der BiestOHigh-strength ZrB2-based ceramics prepared by reactive pulsed electric current sintering of ZrB2–ZrH2 powders. J Eur Ceram Soc. 2012; 32:2537–2543. doi: 10.1016/j.jeurceramsoc.2012.02.035
17.
ZamoraVOrtizALGuiberteauFSpark-plasma sintering of ZrB2 ultra-high-temperature ceramics at lower temperature via nanoscale crystal refinement. J Eur Ceram Soc. 2012; 32:2529–2536. doi: 10.1016/j.jeurceramsoc.2012.02.023
