In this paper we present the results, from what we believe is the first ever attempt to study the mechanical behaviour of pure highly undercooled Cu specimens. The data revealed that the strength of the studied system increases not only with an increase of the level of undercooling, but also with the rate of testing. Microstructural analysis demonstrated that at undercoolings above 200 K the specimens underwent a transition from dendritic to a grain refined structure, accompanied with a break in the stress-undercooling relationship. It is suggested that on this occasion the transition was the result of two competing mechanisms: dendrite fragmentation and recrystallization. Finally, the relationship between the resultant grain sizes and measured stresses is compared against the Hall-Petch Law.
JonesH.Rapid solidification of metals and alloys. London: Institute of Metals; 1982. 3.
2.
EsslingerP.Eigenschaften von aluminiumlegierungen nach sehr rascher erstarrung. I. gefuge. Z. Metallkd. 1966; 57:12.
3.
HerlachDMCochraneRFEgryIContainerless processing in the study of metallic melts and their solidification. Int Mat Rev. 1993; 38:6. doi: 10.1179/095066093790326267
4.
TurnbullDCohenM.Molecular transport in liquids and glasses. J Chem Phys. 1959; 31:1164. doi: 10.1063/1.1730566
5.
FehlingJScheilE.Investigation of undercoolability of molten metals. Z Metall. 1962; 53:593.
6.
PowellGLF.The undercooling of silver. J Aust Inst Met. 1965; 10:223.
7.
KobayashiKFShinguPH.The solidification process of highly undercooled bulk Cu-O melts. J Mater Sci. 1988; 23:2157. doi: 10.1007/BF01115783
8.
WillneckerRHerlachDMFeuerbacherB.Evidence of nonequilibrium processes in rapid solidification of undercooled metals. Phys Rev Lett. 1989; 62:2707. doi: 10.1103/PhysRevLett.62.2707
9.
Costa Agra MelloMKiminamiCS.Undercoolability of copper bulk samples. J Mater Sci Lett. 1989; 8:1416. doi: 10.1007/BF00720207
10.
LiDEcklerKHerlachDM.Development of grain structures in highly undercooled germanium and copper. J Cryst Growth. 1995; 160:59. doi: 10.1016/0022-0248(95)00550-1
11.
BattersbySECochraneRFMullisAM.Microstructural evolution and growth velocity-undercooling relationships in the systems Cu, Cu-O and Cu-Sn at high undercooling. J Mater Sci. 2000; 35:1365. doi: 10.1023/A:1004782107849
12.
DragnevskiKCochraneRFMullisAM.Experimental evidence for dendrite tip splitting in deeply undercooled, ultrahigh purity Cu. Phys Rev Lett. 2002; 89:215502. doi: 10.1103/PhysRevLett.89.215502
13.
DragnevskiKCochraneRFMullisAM.The effect of experimental variables on the levels of melt undercooling. Mat Sci Eng A. 2004; 479:375–377.
14.
FollansbeePSKocksUF.A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable. Acta Metall. 1988; 36(1):81. doi: 10.1016/0001-6160(88)90030-2
15.
MeyersMAAndradeURChokshiAH.The effect of grain size on the high-strain, high-strain-rate behavior of copper. Mater Trans A. 1995; 26(11):2881. doi: 10.1007/BF02669646
16.
OstwaldtDKlimanekP.The influence of temperature and strain rate on microstructural evolution of polycrystalline copper. Mater Sci Eng A. 1997; 810:A234–A236.
17.
PetchNJ.The cleavage strength of polycrystals. J Iron Steel Inst. 1953; 174(1):25.
18.
HallEO.The deformation and ageing of mild steel: III discussion of results. Proc Phys Soc. 1951; B64(9):747. doi: 10.1088/0370-1301/64/9/303
19.
ChokshiAH.On the validity of the Hall-Petch relationship in nanocrystalline materials. Scripta Metall. 1989; 23:1679. doi: 10.1016/0036-9748(89)90342-6
20.
JordanJLSiviourCRCraig BramletteGSStrain rate dependant mechanical properties of OFHC copper. J Mat Sci. doi:10.1007/s10853-013-7529-9.
21.
ASTM Standard Test Methods for determining average grain size E112 updated 2013.
22.
DragnevskiKCochraneRFMullisAM.The mechanism of spontaneous grain refinement in undercooled pure Cu melts. Mat Sci Eng A. 2004; 484:375–377.
23.
ZerilliFJArmstrongRW.Dislocation-mechanics-based constitutive relations for material dynamics calculations. J Appl Phys. 1987; 61:1816. doi: 10.1063/1.338024
24.
ThompsonAWBaskesMIFlanaganWF.The dependence of polycrystal work hardening on grain size. Acta Metal. 1973; 21:1017. doi: 10.1016/0001-6160(73)90158-2
25.
LiuZLYouXCZhuangZ.A mesoscale investigation of strain rate effect on dynamic deformation of single-crystal copper. Int J Solids Struct. 2008; 45:3674–3678. doi: 10.1016/j.ijsolstr.2007.08.032
