ChenS, RanaR, HaldarA, Current state of Fe–Mn–Al–C low density steels. Prog Mater Sci. 2017;89:345–391. doi: 10.1016/j.pmatsci.2017.05.002
3.
RanaR.High modulus steels. Can Metall Q. 2014;53(3):241–242. doi: 10.1179/0008443314Z.000000000178
4.
MatlockDK, SpeerJG, De MoorE, Recent developments in advanced high strength sheet steels for automotive applications: an overview. Jestech. 2012;15(1):1–12.
5.
MatlockD, SpeerJ.Third generation of AHSS: microstructure design concepts. In: HaldarA, SuwasS, BhattacharjeeD, editor. Microstructure and texture in steels. London: Springer; 2009. pp. 185–205.
6.
ZackayVF, ParkerER, FahrD, The enhancement of ductility in high-strength steels. ASM Trans Quar. 1967;60(2):252–259.
7.
BhadeshiaHKDH, EdmondsDV.Bainite in silicon steels: new composition property approach – part 1. Met Sci. 1983;17(9):411–419. doi: 10.1179/030634583790420600
8.
SpeerJ, MatlockDK, De CoomanBC, Carbon partitioning into austenite after martensite transformation. Acta Mater. 2003;51(9):2611–2622. doi: 10.1016/S1359-6454(03)00059-4
9.
MatsumuraO, SakumaY, TakechiH.Enhancement of elongation by retained austenite in intercritical annealed 0.4C–1.5Si–O.8Mn steel. Trans ISIJ. 1987;27(7):570–579. doi: 10.2355/isijinternational1966.27.570
10.
MorganER, KoT.Thermal stabilization of austenite in iron-carbon-nickel alloys. Acta Metall. 1953;1(1):36–48. doi: 10.1016/0001-6160(53)90008-X
11.
BrookR, SanyalTK, WhiteG.Thermal stabilization of austenite in a high-nickel steel. Metall Trans A. 1977;8(9):1449–1452. doi: 10.1007/BF02642858
12.
FultzB, MorrisJW.The mechanical stability of precipitates austenite in 9Ni steel. Metall Trans A. 1985;16(12):2251–2256. doi: 10.1007/BF02670424
13.
KimHJ, KimYH, MorrisJWJr. Thermal mechanisms of grain and packet refinement in a lath martensitic steel. ISIJ Int. 1998;38(11):1277–1285. doi: 10.2355/isijinternational.38.1277
14.
MillerRL.Ultrafine-grained microstructures and mechanical properties of alloy steels. Metall Mater Trans B. 1972;3(4):905–912. doi: 10.1007/BF02647665
15.
FurukawaT.Dependence of strength–ductility characteristics on thermal history in low carbon, 5 wt-% Mn steels. Mater Sci Technol. 1989;5(5):465–470. doi: 10.1179/mst.1989.5.5.465
16.
HuangH, MatsumuraO, FurukawaT.Retained austenite in low carbon, manganese, steel after intercritical heat treatment. Mater Sci Technol. 1994;10(7):621–626. doi: 10.1179/mst.1994.10.7.621
17.
MerwinMJ.Microstructure and properties of cold-rolled-and-annealed low-carbon manganese TRIP steels. Mater Sci Technol. 2007;5(10):515–536.
18.
MerwinMJ.Hot- and cold-rolled low-carbon manganese TRIP steels. SAE Trans. 2007;116:8–19.
19.
The 4th International Conference on Medium and High Manganese Steels. Aachen, Germany. April 1–3, 2019. RWTH Aachen University and Max Planck Institute for Iron Research, Düsseldorf.
20.
Special issue on “Medium-Mn steels, a promising type of the 3rd generation steels”, Karjalainen LP, editor. Metals. 2019.
21.
Special issue on “Physical metallurgy of high manganese steels, Bleck W, Haase C, editors. Metals. 2019.
22.
De CoomanBC.High Mn TWIP steel and medium Mn steel. In: RanaR, SinghSB, editor. Automotive steels – design, metallurgy, processing and applications. London: Elsevier; 2016. pp. 317–385.
23.
LeeYK, HanJ.Current opinion in medium manganese steel. Mater Sci Technol. 2015;31(7):843–856. doi: 10.1179/1743284714Y.0000000722
24.
MaY.Medium-manganese steels processed by austenite-reverted-transformation annealing for automotive applications. Mater Sci Technol. 2017;33(15):1713–1727. doi: 10.1080/02670836.2017.1312208
WolframP, HensleyC, YoungbloodR, Towards the development of AHSS towards wear resistance applications. Mater Sci Forum. 2018;941:568–573. doi: 10.4028/www.scientific.net/MSF.941.568
27.
CaiZH, ZhangKM, JingSY, Influence of nickel on microstructure and mechanical properties of medium-manganese steels. Mater Sci Technol. 2018;35(1):68–76. doi: 10.1080/02670836.2018.1539646
28.
SchneiderR, SteinederK, KrizanD, Effect of the heat treatment on the microstructure and mechanical properties of medium-Mn-steels. Mater Sci Technol. 2019;35(17). doi: 10.1080/02670836.2018.1548957
29.
BhattacharyaA, BokinalaPK, MitraR, Relative effect of C and Mn on strength-toughness of medium Mn steels. Mater Sci Technol. 2019;35(1):55–67. doi: 10.1080/02670836.2018.1537609
30.
SarkarA, SanyalS, BandopadhyayTK, Recrystallization behaviour and tensile properties of Al-added medium-Mn-steel at different deformation-annealing conditions. Mater Sci Technol. 2019;35(17). doi: 10.1080/02670836.2018.1560987
31.
NamJH, YuSH, LeeYK.Effect of auto-tempering on the cold roll-ability of medium-Mn steel. Mater Sci Technol. 2019;35(17). doi: 10.1080/02670836.2018.1547474
32.
ArlazarovA, GouneM, BouazizO, Time-evolution of microstructure and mechanical behaviour of double annealed medium Mn steel. Mater Sci Technol. 2019;35(17). doi: 10.1080/02670836.2019.1585031
33.
DuPJ, YangDP, BaiMK, Austenite stabilisation by two step partitioning of manganese and carbon in a Mn-TRIP steel. Mater Sci Technol. 2019;35(17). doi: 10.1080/02670836.2019.1572316
34.
LiY, HuyanF, DingW.Microstructure and tensile properties of a 0.20C–4.86Mn steel after short intercritical annealing times. Mater Sci Technol. 2019;35(2):220–230. doi: 10.1080/02670836.2018.1550864
35.
ChoiYH, RyuJH, LeeSW, Influence of initial microstructures on intercritical annealing behaviour in a medium Mn steel. Mater Sci Technol. 2019;35(17). doi: 10.1080/02670836.2018.1475445
36.
HouF, BaiY, ShibataA, Microstructure evolution during thermomechanical processing in 3Mn–0.1C medium-Mn steel. Mater Sci Technol. 2019;35(17). doi: 10.1080/02670836.2018.1548099
37.
RenzettiRA, VdPS, FreitasES, Initial microstructure and retained austenite in 8 Mn steel controlled by cooling rate. Mater Sci Technol. 2019;35(9):552–559. doi: 10.1080/02670836.2019.1572318
38.
PerladeA, AntoniA, BessonR, Development of 3rd generation medium Mn duplex steels for automotive applications. Mater Sci Technol. 2019;35(2):204–219. doi: 10.1080/02670836.2018.1549303
39.
HeBB, WangM, LiuL, High-strength medium Mn quenching and partitioning steel with low yield ratio. Mater Sci Technol. 2019;35(17). doi: 10.1080/02670836.2019.1566046
40.
KimDH, KangJH, RyuJH, Enhancement of tensile properties by room temperature quenching and partitioning of 0.2C–10Mn–2Al steel. Mater Sci Technol. 2019;35(17). doi: 10.1080/02670836.2018.1522101
41.
PanH, CaiM, DingH, Ultrahigh strength-ductile medium-Mn steel auto parts combining warm stamping and quenching & partitioning. Mater Sci Technol. 2019;35(7):807–814. doi: 10.1080/02670836.2019.1591029
42.
WangH, ZhangY, RanR, A medium-Mn steel processed by novel twin-roll strip casting route. Mater Sci Technol. 2019;35(10):1227–1238. doi: 10.1080/02670836.2019.1618620
43.
MagalhãesAS, dos SantosCE, FerreiraAOV, Analysis of medium manganese steel through cold-rolling and intercritical annealing or warm rolling. Mater Sci Technol. 2019;35(17). doi: 10.1080/02670836.2018.1463613
44.
QiX, DuL, HuJ, Effect of austenite stability on toughness, ductility, and work-hardening of medium-Mn steel. Mater Sci Technol. 2019;35(17). doi: 10.1080/02670836.2018.1522088
45.
ChenJ, RenJK, LiuZY, 1.0 GPa low carbon medium Mn heavy steel plate with excellent ductility. Mater Sci Technol. 2019;35(17). doi:10.1080/02670836.2018.1558718 doi: 10.1080/02670836.2016.1258154
46.
Advanced High Strength Steel (AHSS) Application Guidelines, International Iron & Steel Institute, Committee on Automotive Applications, available online at www.worldautosteel.org.
47.
RanaR, De MoorE, SpeerJG, On the importance of adiabatic heating on deformation behavior of medium-manganese sheet steels. JOM. 2018;70(5):706–713. doi: 10.1007/s11837-018-2779-2
48.
HorvathCD, EnloeCM, SinghJP, Persistent challenges to advanced high-strength steel implementation. Iron Steel Technol. 2017;14(10):76–83.
