Cold spraying (CS), a solid-state spraying technology, is expected to become an appropriate supplementary for traditional spraying methods owing to its plenty of merits such as high deposition efficiency, low temperature and little influence on the particles/substrate. The most reported researches are bulk alloys fabricated by CS. However, the systematic introduction and cold-sprayed metallic glass coatings have not been summarised. Therefore, in this paper, the international research status of CS including equipment structure, spraying process and parameters, advantages and disadvantages, deposit features and bonding mechanism were introduced. By using this technology, the successful researches about Fe-, Al-, Ni-, Cu- and Zr- based amorphous alloy coatings are reported. To overcome the limitations, further development and solutions were proposed.
MoridiA, Hassani-GangarajSM, GuaglianoM, Cold spray coating: review of material systems and future perspectives. Surf Eng. 2014;30:369–395.
2.
RokniMR, NuttSR, WidenerCA, Review of relationship between particle deformation, coating microstructure, and properties in high-pressure cold spray. J Therm Spray Techn. 2017;26(6):1308–1355.
3.
LiW, YangK, YinS, Solid-state additive manufacturing and repairing by cold spraying: a review. J Mater Sci Technol. 2018;34(3):440–457.
4.
ChampagneV, HelfritchD.The unique abilities of cold spray deposition. Int Mater Rev. 2016;61(7):437–455.
5.
RaoelisonRN, VerdyC, LiaoH.Cold gas dynamic spray additive manufacturing today: Deposit possibilities, technological solutions and viable applications. Mater Design. 2017;133:266–287.
6.
QiaoJW.In-situ Dendrite/Metallic Glass Matrix Composites: A review. J Mater Sci Technol. 2018;29(8):685–701.
7.
KruzicJJ.Bulk metallic glasses as structural materials: A review. Adv Eng Mater. 2016;18(8):1308–1331.
8.
KhanMM, NematiA, RahmanZU, Recent advancements in bulk metallic glasses and their applications: A review. Crit Rev Solid State. 2017;43(3):233–268.
9.
AssadiH, GartnerF, StoltenhoffT, Bonding mechanism in cold gas spraying. Acta Mater. 2003;51(15):4379–4394.
10.
GrujicicM, ZhaoCL, DeRossetWS, Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process. Mater Design. 2004;25(8):681–688.
11.
ListA, GaertnerF, SchmidtT, Impact conditions for cold spraying of hard metallic glasses. J Therm Spray Technol. 2012;21(3–4):531–540.
12.
TailleartNR, GauthierB, EidelmanS, Metallurgical and physical factors controlling the multi-functional corrosion properties of pulsed thermal-sprayed Al-Co-Ce coatings. Corrosion. 2012;68(3):035006.
13.
YoonS, BaeG, XiongY, Strain-enhanced nanocrystallization of a CuNiTiZr bulk metallic glass coating by a kinetic spraying process. Acta Mater. 2009;57(20):6191–6199.
14.
YinS, CavaliereP, AldwellB, Cold spray additive manufacturing and repair: Fundamentals and applications. Addit Manuf. 2018;21:628–650.
15.
PattisonJ, CelottoS, MorganR, Cold gas dynamic manufacturing: A non-thermal approach to freeform fabrication. Int J Mach Tool Manu. 2007;47(3–4):627–634.
16.
ZhuL, JenTC, PanYT, Particle bonding mechanism in cold gas dynamic spray: A three-dimensional approach. J Therm Spray Technol. 2017;26(8):1859–1873.
17.
BielousovaO, KocimskiJ, MaevRG, Localisation of deformation in cold gas dynamic spraying. Surf Eng. 2016;32(9):655–662.
18.
MengF, AydinH, YueS, The effects of contact conditions on the onset of shear instability in cold-spray. J Therm Spray Technol. 2015;24(4):711–719.
19.
SalehM, LuzinV, SpencerK.Analysis of the residual stress and bonding mechanism in the cold spray technique using experimental and numerical methods. Surf Coat Tech. 2014;252:15–28.
20.
WalkerM.Microstructure and bonding mechanisms in cold spray coatings. Mater Sci Tech. 2018;34(17):2057–2077.
21.
JohnsonGR, CookWH.Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Fract Mech. 1985;21(1):31–48.
22.
HufnagelTC, SchuhCA, FalkML.Deformation of metallic glasses: Recent developments in theory, simulations, and experiments. Acta Mater. 2016;109:375–393.
23.
JohnsonWL, LuJ, DemetriouMD.Deformation and flow in bulk metallic glasses and deeply undercooled glass forming liquids – a self consistent dynamic free volume model. Intermetallics. 2002;10(11–12):1039–1046.
24.
HenaoJ, ConcustellA, DostaS, Deposition mechanisms of metallic glass particles by Cold Gas Spraying. Acta Mater. 2017;125:327–339.
25.
ZhouX, WuX, MouS, Simulation of deposition behavior of bulk amorphous particles in cold spraying. Mater. Trans. 2010;51(10):1977–1980.
26.
YoonS, LeeC, ChoiH, Impacting behavior of bulk metallic glass powder at an abnormally high strain rate during kinetic spraying. Mater Sci Eng. 2007;449:911–915.
27.
YoonS, LeeC, ChoiH, Kinetic spraying deposition behavior of bulk amorphous NiTiZrSiSn feedstock. Mat Sci Eng A-Struct. 2006;415(1–2):45–52.
28.
ConcustellA, HenaoJ, DostaS, On the formation of metallic glass coatings by means of cold gas spray technology. J Alloys Compd. 2015;651:764–772.
29.
SpaepenF.Homogeneous flow of metallic glasses: A free volume perspective. Scripta Mater. 2006;54(3):363–367.
JunHJ, LeeKS, YoonSC, Finite-element analysis for high-temperature deformation of bulk metallic glasses in a supercooled liquid region based on the free volume constitutive model. Acta Mater. 2010;58(12):4267–4280.
32.
HenannD, AnandL.A constitutive theory for the mechanical response of amorphous metals at high temperatures spanning the glass transition temperature: Application to microscale thermoplastic forming. Acta Mater. 2008;56(13):3290–3305.
33.
PanJ, WangYX, GuoQ, Extreme rejuvenation and softening in a bulk metallic glass. Nat Commun. 2018;9(1):560.
34.
ArabgolZ, Villa VidallerM, AssadiH, Influence of thermal properties and temperature of substrate on the quality of cold-sprayed deposits. Acta Materi. 2017;127:287–301.
35.
HenaoJ, BolelliG, ConcustellA, Deposition behavior of cold-sprayed metallic glass particles onto different substrates. Surf Coat Tech. 2018;349:13–23.
36.
UmedaT, MimuraK.Numerical analysis of the impact fracture of metallic glass based on free volume model. Key Engineering Materials. 2019;794:188–193.
KimK, WatanabeM, KurodaS.Bonding mechanisms of thermally softened metallic powder particles and substrates impacted at high velocity. Surf Coat Tech. 2010;204(14):2175–2180.
39.
Hassani-GangarajM, VeyssetD, ChampagneVK, Adiabatic shear instability is not necessary for adhesion in cold spray. Acta Mater. 2018;158:430–439.
40.
HenaoJ, ConcustellA, DostaS, Influence of the substrate on the formation of metallic glass coatings by cold gas spraying. J Therm Spray Techn. 2016;25(5):992–1008.
41.
SchmidtT, GaertnerF, KreyeH.New developments in cold spray based on higher gas and particle temperatures. J Therm Spray Techn. 2006;15(4):488–494.
42.
QinWB, LiJS, LiuYY, Effects of grain size on tensile property and fracture morphology of 316L stainless steel. Mater Lett. 2019;254:116–119.
43.
SongJ, LiuJ, ChenQ, Effect of the shape factor on the cold-spraying dynamic characteristics of sprayed particles. J Therm Spray Techn. 2017;26(8):1851–1858.
44.
SamsonT, MacDonaldD, FernándezR, Effect of pulsed waterjet surface preparation on the adhesion strength of cold gas dynamic sprayed aluminum coatings. J Therm Spray Techn. 2015;24(6):984–993.
45.
PattisonJ, CelottoS, KhanA, Standoff distance and bow shock phenomena in the cold spray process. Surf Coat Tech. 2008;202(8):1443–1454.
46.
YinS, WangX, LiW, Numerical study on the effect of substrate angle on particle impact velocity and normal velocity component in cold gas dynamic spraying based on CFD. J Therm Spray Techn. 2010;19(6):1155–1162.
47.
BinderK, GottschalkJ, KollendaM, Influence of impact angle and gas temperature on mechanical properties of titanium cold spray deposits. J Therm Spray Techn. 2010;20(1-2):234–242.
48.
GärtnerF, SchmidtT, StoltenhoffT, Recent developments and potential applications of cold spraying. Adv Eng Mater. 2006;8(7):611–618.
49.
LeeMW, ParkJJ, KimDY, Numerical studies on the effects of stagnation pressure and temperature on supersonic flow characteristics in cold spray applications. J Therm Spray Techn. 2011;20(5):1085–1097.
50.
PriscoU.Size-dependent distributions of particle velocity and temperature at impact in the cold-gas dynamic-spray process. J Mater Process Tech. 2015;216:302–314.
51.
YoonS, KimHJ, LeeC.Deposition behavior of bulk amorphous NiTiZrSiSn according to the kinetic and thermal energy levels in the kinetic spraying process. Surf Coat Tech. 2006;200(20–21):6022–6029.
52.
MengX, ZhangJ, ZhaoJ, Influence of gas temperature on microstructure and properties of cold spray 304SS coating. J Mater Sci Technol. 2011;27(9):809–815.
53.
LiomaD, SacksN, BotefI.Cold gas dynamic spraying of WC–Ni cemented carbide coatings. Int J Refract Met H. 2015;49:365–373.
WangY, LiMY, SunLL, Environmentally assisted fracture behavior of Fe-based amorphous coatings in chloride-containing solutions. J Alloy Compd. 2018;738:37–48.
56.
LinJR, WangZH, ChengJB, Effect of initial surface roughness on cavitation erosion resistance of arc-sprayed Fe-based amorphous/nanocrystalline coatings. Coatings. 2017;7(11):200.
57.
ZhouH, ZhangC, WangW, Microstructure and mechanical properties of Fe-based amorphous composite coatings reinforced by stainless steel powders. J of Mater Sci Technol. 2015;31(1):43–47.
58.
GaoM, LuW, YangB, High corrosion and wear resistance of Al-based amorphous metallic coating synthesized by HVAF spraying. J Alloy Compd. 2018;735:1363–1373.
59.
ShenY, PerepezkoJH.Al-based amorphous alloys: Glass-forming ability, crystallization behavior and effects of minor alloying additions. J Alloy Compd. 2017;707:3–11.
60.
GoldmanME, ÜnlüN, ShifletGJ, Selected corrosion properties of a novel amorphous Al-Co-Ce alloy system. Electrochem Solid St. 2005;8(2):B1, doi:10.1149/1.1848261.
61.
BahramiF, AminiR, TaghvaeiAH.Microstructure and corrosion behavior of electrodeposited Ni-based nanocomposite coatings reinforced with Ni60Cr10Ta10P16B4 metallic glass particles. J Alloy Compd. 2017;714:530–536.
62.
SureshK, YugeswaranS, RaoKP, Sliding wear behavior of gas tunnel type plasma sprayed Ni-based metallic glass composite coatings. Vacuum. 2013;88:114–117.
63.
WangD, LiP.Thermodynamic and mechanical properties of Cu–Zr–Al–Ti bulk metallic glasses. AIP Adv. 2018;8(12):125003.
64.
WangB, XuKK, ShiXH, Electrochemical and chemical corrosion behaviors of the in-situ Zr-based metallic glass matrix composites in chloride-containing solutions. J Alloy Compd. 2019;770:679–685.
65.
ZhangY, YanL, ZhaoX, Enhanced chloride ion corrosion resistance of Zr-based bulk metallic glasses with cobalt substitution. J Non-Cryst Solids. 2018;496:18–23.
66.
WuJ, ZhangSD, SunWH, Enhanced corrosion resistance in Fe-based amorphous coatings through eliminating Cr-depleted zones. Corros Sci. 2018;136:161–173.
67.
WangW, ZhangC, ZhangZW, Toughening Fe-based amorphous coatings by reinforcement of amorphous carbon. Sci Rep-UK. 2017;7(1):4084.
68.
TianWP, YangHW, ZhangSD.Synergistic effect of Mo, W, Mn and Cr on the passivation behavior of a Fe-based amorphous alloy coating. Acta Metall Sin-Engl. 2017;31(3):308–320.
69.
JiaoJ, LuoQ, WeiX, Influence of sealing treatment on the corrosion resistance of Fe-based amorphous coatings in HCl solution. J Alloy Compd. 2017;714:356–362.
70.
AjdelsztajnL, JodoinB, RicherP, Cold gas dynamic spraying of iron-base amorphous alloy. J Therm Spray Techn. 2006;15(4):495–500.
71.
GuanL, YanB, LongL, Preliminary study of fabricating bulk Fe-based amorphous alloy by cold gas dynamic spraying. Int J Mod Phys B. 2009;23(6–7):1288–1293.
72.
HenaoJ, ConcustellA, CanoIG, Influence of cold gas spray process conditions on the microstructure of Fe-based amorphous coatings. J Alloy Compd. 2015;622:995–999.
73.
YoonS, KimJ, BaeG, Formation of coating and tribological behavior of kinetic sprayed Fe-based bulk metallic glass. J Alloy Compd. 2011;509(2):347–353.
74.
TrexlerMM, ThadhaniNN.Mechanical properties of bulk metallic glasses. Prog Mater Sci. 2010;55(8):759–839.
75.
SchuhC, HufnagelT, RamamurtyU.Mechanical behavior of amorphous alloys. Acta Mater. 2007;55(12):4067–4109.
76.
QinWB, LiuYY, YueW, Influence of frictional interface state on tribological performance of sintered polycrystalline diamond sliding against different mating materials. Tribol Lett. 2019;67:87.
77.
ChoiSJ, LeeHS, JangJW, Corrosion behavior in a 3.5 wt% NaCl solution of amorphous coatings prepared through plasma-spray and cold-spray coating processes. Met Mater Int. 2014;20(6):1053–1057.
78.
SansoucyE, KimGE, MoranAL, Mechanical characteristics of Al-Co-Ce coatings produced by the cold spray process. J Therm Spray Techn. 2007;16(5-6):651–660.
79.
KohPK, LokeK, YuSCM, Deposition of amorphous aluminium powder using cold spray, Proceedings from the International Thermal Spray Conference and Exposition, Houston, Texas, USA, 2012.
80.
LahiriD, GillPK, ScudinoS, Cold sprayed aluminum based glassy coating: Synthesis, wear and corrosion properties. Surf Coat Tech. 2013;232:33–40.
81.
HenaoJ, ConcustellA, CanoIG, Novel Al-based metallic glass coatings by cold gas spray. Mater Design. 2016;94:253–261.
82.
ChoiH, YoonS, KimG, Phase evolutions of bulk amorphous NiTiZrSiSn feedstock during thermal and kinetic spraying processes. Scripta Mater. 2005;53(1):125–130.
83.
YoonS, LeeC, ChoiH, Evaluation of the effects of the crystallinity of kinetically sprayed Ni–Ti–Zr–Si–Sn bulk metallic glass on the scratch response. Mat Sci Eng A. 2007;449–451:285–289.
84.
ChoiH, JoH, AnK, Tribological behavior of the kinetic sprayed Ni59Ti16Zr20Si2Sn3 bulk metallic glass. J Alloy Compd. 2007;434–435:64–67.
85.
WangAP, ChangXC, HouWL, Preparation and corrosion behaviour of amorphous Ni-based alloy coatings. Mat Sci Eng A. 2007;7449–451:277–280.
WangY, ShiL, DuanD, Tribological properties of Zr61Ti2Cu25Al12 bulk metallic glass under simulated physiological conditions. Mat Sci Eng C. 2014;37:292–304.
92.
KangN, CoddetP, LiaoH, The effect of heat treatment on microstructure and tensile properties of cold spray Zr base metal glass/Cu composite. Surf Coat Tech. 2015;280:64–71.
