A newly developed heavily alloyed polycrystalline nickel-base superalloy containing rhenium and intended as a structural material for turbine discs in gas turbine engines has been studied. Homogenisation and heterogenisation heat treatments were developed for the as-cast superalloy, which led to improving the hot workability as compared to that of as-cast material. electron backscatter diffraction analysis of samples isothermally compressed at temperatures near the solvus temperature showed that continuous dynamic recrystallisation occurred in the superalloy leading to the formation of refined recrystallised structure. These results were used for the development of canned forging processing under quasi-isothermal conditions. The superalloy subjected to canned forging followed by aging exhibited superior high strength and high-temperature capability, while retaining reasonable ductility as compared to known disc superalloys.
ReedRC.The superalloys: fundamentals and applications. Cambridge: Cambridge University Press; 2006.
2.
KushanMC, UzgurSC, UzunonatY, Recent advances in aircraft technology. Rijeka: InTech Rijeka; 2012. p. 75–96.
3.
KaibyshevOA, UtyashevFZ.Superplasticity: microstructural refinement and superplastic roll forming. Arlington ( VA): Futurepast. ISTC Science and Technology Series; 2005.
4.
HobbsRA, TinS, RaeCMF.A castability model based on elemental solid-liquid partitioning in advanced nickel-base single-crystal superalloys. Metall Mater Trans A. 2005;36:2761–2773. doi:10.1007/s11661-005-0272-3.
5.
TinS, ZhangL, HobbsRA, Linking the properties, processing and chemistry of advanced single crystal Ni-base superalloys. In Reed RC, Green KA, Caron P et al., editors. Proceedings of the 11th International Symposium on Superalloys; 2008 Sept 14–18; Warrendale, PA: TMS; 2008. p. 81–90.
6.
SatoA, HaradaH, YehA-C, A 5th generation SC superalloy with balanced high temperature properties and processability. In: Reed RC, Green KA, Caron P, et al., editors. Proceedings of the 11th International Symposium on Superalloys; 2008 Sept 14–18; Warrendale, PA: TMS; 2008. p. 131–138.
7.
FordDA, FullagarKPL, BhanguHK, Improved performance rhenium containing single crystal alloy turbine blades utilizing PPM levels of the highly reactive elements Lanthanum and Yttrium. J Eng Gas Turbine Power. 1999;121:138–143. doi: 10.1115/1.2816301
8.
HarrisK, WahlJB.Improved single crystal superalloys, CMSX-4(SLS)[La+Y] and CMSX-486. In: Green KA, Pollock TM, Harada H, et al. editors. Proceedings of the 10th International Symposium on Superalloys; 2004 Sept 19–23; Warrendale, PA: TMS; 2004. p. 45–52.
9.
SandimHRZ, HayamaAOF, RaabeD.Recrystallization of the ODS superalloy PM-1000. Mater Sci Eng A. 2006;430:172–178. doi:10.1016/j.msea.2006.05.110.
10.
KovanV, HammerJ, MaiR, Thermal-mechanical fatigue behaviour and life prediction of oxide dispersion strengthened nickel-based superalloy PM1000. Mater Charact. 2008;59:1600–1606. doi:10.1016/j.matchar.2008.02.004.
11.
HumphreysAO, ShawSWK, MartinJW.Effect of process variables on the structure of directionally recrystallized MA-6000. Mater Charact. 1995;34:9–13. doi:10.1016/1044-5803(94)00045-M.
12.
KennedyRL, CaoW.inventors; ATI properties, Inc., assignee. Nickel alloy and method of direct aging heat treatment. World Intellectual Property Organization WO 2007/084178 A2 (PCT/US2006/017804). 2007 Jul 26.
13.
ImayevRM, NazarovАА, MulyukovRR, Principles of processing of an ultrafine-grained structure in large-section billets. Lett Mater. 2014;4:295–301. Russian. doi:10.22226/2410-3535-2014-4-295-301.
14.
ShKhM, ShakhovRV, GaneevAA, Microstructure and mechanical properties of a novel polycrystalline rhenium-containing nickel base disc superalloy subjected to hot forging. IOP Conf Series: Mater Sci Eng. 2018;447:012055. doi: 10.1088/1757-899X/447/1/012055
15.
KaibyshevOA.Superplasticity of alloys, intermetallides and ceramics. Berlin: Springer-Verlag; 1992.
16.
GuedouJY, LautridouJC, HonnoratY, PM superalloy for disks: development and applications. In: Antolovich SD, Stusrud RW, MacKay RA, editors. Proceedings of the 7th International Symposium on Superalloys; 1992 Sept 20–24; Warrendale, PA: TMS; 1992. p. 267–276.
17.
RiceD, KantzosP, HannB, P/M Alloy-10 – A 700°C Capalle nickel-based superalloy for turbine disk applications. In: Reed RC, Green KA, Caron P, editors. Proceedings of the 11th International Symposium on Superalloys; 2008 Sept 14–18; Warrendale, PA: TMS; 2008. p. 139–147.
18.
MerrickH, BennRC, BhowalPR.inventor; Honeywell International, Inc., assignee. High strength powder metallurgy nickel base alloy. United States patent US 6,468,368 B1. 2002 Oct 22.
19.
GuYF, CuiC, HaradaH, Development of Ni-Co-base alloys for high-temperature disk applications. In: Reed RC, Green KA, Caron P, editors. Proceedings of the 11th International Symposium on Superalloys; 2008 Sept 14–18; Warrendale, PA: TMS; 2008. p. 53–61.
20.
HuronES, BainKR, MourerDP, Development of high temperature capability P/M disk superalloys. In: Reed RC, Green KA, Caron P, editors. Proceedings of the 11th International Symposium on Superalloys; 2008 Sept 14–18; Warrendale, PA: TMS; 2008. p. 181–189.
21.
GaoY, StoelkenJS, KumarM, High-cycle fatigue of nickel-base superalloy Rene 104 (ME3): Interaction of microstructurally small cracks with grain boundaries of known character. Acta Mater. 2007;55:3155–3167. doi:10.1016/j.actamat.2007.01.033.
22.
JiaCL, GeCC, YanQZ.Microstructure evolution and mechanical properties of disk superalloy under multiplex heat treatment. Mater Sci Eng A. 2016;659:287–294. doi:10.1016/j.msea.2016.02.038.
23.
GabbTP, GaydaJ, TelesmanI, inventor; The United States National Aeronautics and Space Administration, Washington, DC (US), assignee. Nickel base superalloy turbine disk. United States patent US 6,974,508 B1. 2005 Dec 13.
