Interdendritic microsegregation development of high-strength low-alloy steels during continuous casting process

Abstract

A 1-D model based on DICTRA software was used to simulate Mn microsegregation in high-strength low-alloy steels during continuous casting. The experimentally determined (using a cumulative profiling method) segregation results were in good agreement with the modelling results. Steels undergoing solidification via a peritectic reaction had a larger segregation range than non-peritectic steels ascribed to trapping of the alloying atoms in liquid by austenite acting as a diffusion barrier. Subsequent, post-solidification cooling through the single phase austenite field decreased the microsegregation level, although the last γ→α phase transformation did affect the segregation profile in the solute-depleted dendrite centre. Simulation indicates that segregation levels could be reduced by decreasing either secondary dendrite arm spacing or adopting faster cooling rates through solidification.