Service degradation of F-class gas turbine blade and its microstructure evolution during a simple rejuvenation process are investigated, and then microhardness of the rejuvenated blade is evaluated. The results show that the turbine blade suffers from significant service degradation such as spheroidising, coarsening and rafting of the γ′ phase. It is also verified that the γ′ precipitates microstructure could be recovered and even improved by a full solution followed by two-step aging. The proper solution temperature is necessary to dissolve the deformed γ′ precipitates and allows optimum reprecipitation during next aging. The microstructure of the rejuvenated blade all shows bimodal distribution with coarse and fine γ′ precipitates. The microhardness is higher and more uniformly distributed than that of the service-exposed blade.
KamarajM.Rafting in single crystal nickel-base superalloys-an overview. Sadhana. 2003;28:115–128. doi: 10.1007/BF02717129
3.
HosseiniSS, NateghS, EkramiAA.Changes of γ′ precipitate characteristics in damaged superalloy IN738LC during different stages of rejuvenation heat treatment cycles. Mater Sci Tech-Lond. 2012;28:213–219. doi: 10.1179/1743284711Y.0000000021
4.
LvovaE.A comparison of aging kinetics of new and rejuvenated conventionally cast GTD-111 gas turbine blades. J Mater Eng Perform. 2007;16:254–264. doi: 10.1007/s11665-007-9046-y
5.
JamesA.Review of rejuvenation process for nickel base superalloys. Mater Sci Tech-Lond. 2001;17:481–486. doi: 10.1179/026708301101510168
6.
WangyaoP, KorathT, HarnvirojkulT, The SEM study of microstructural restoration by re-heat treatment in cast superalloy turbine blade. Acta Metall Slovaka. 2005;11:25–35.
7.
ZhouY, ZhangZ, ZhaoZ, Effects of HIP temperature on the microstructural evolution and property restoration of a Ni-based superalloy. J Mater Eng Perform. 2013;22:215–222. doi: 10.1007/s11665-012-0246-8
8.
WangyaoP, KrongtongV, PanichN.Effect of 12 heat treatment conditions after HIP process on microstructural refurbishment in cast nickel-based superalloy, GTD111. High Temp Mat Pr-isr. 2007;26:151–159.
9.
LiburdiJ, LowdenP, NagyD, Practical experience with the development of superalloy rejuvenation. ASME Turbo Expo. 2009;4:819–827.
10.
VandrunenG, LiburdiJ.Rejuvenation of used turbine blades by hot isostatic pressing. Turbomachines. 1977: 55–60. doi:10.21423/R1MQ1G.
11.
LiburdiJ, WilsonJ.Mechanical and metallurgical considerations in extending the life of turbine blades. Can Aeronaut Space J.1981;27:363–374.
12.
KoulAK, ImmarigeonJP, CastilloR, Rejuvenation of service-exposed in 738 turbine blades. Superalloys 1988. Pennsylvania: TMS; 1988. p. 755–764.
13.
YoshiokaY, YoshiokaY, SaitoD, Life-refurbishment of service-degraded gas turbine buckets. ASME Turbo Expo. 2004. doi:10.1115/GT2004-54040.
14.
WangyaoP, PolsilapaS, NisaratanapornE.The application of hot isostatic pressing process to rejuvenate serviced cast superalloy turbine blades. Acta Metall Slovaka. 2005;11:196–206.
15.
KimHI, ParkHS, KooJM, Microstructural investigation of GTD111DS materials in the heat treatment conditions. J Mech Sci Technol. 2012;26:2019–2022. doi: 10.1007/s12206-012-0506-4
16.
ShiZX, LiuSZ, LiJR.Rejuvenation heat treatment of the second-generation single-crystal superalloy DD6. Acta Metall Sin. 2015;28:1278–1285. doi: 10.1007/s40195-015-0323-8
17.
KlarstromDL, HobackGL, IshwarVR, Rejuvenation heat treatment and weld repairability studies of Haynes®230®alloy. ASME Turbo Expo. 2000. doi:10.1115/2000-GT-0629.
18.
McleanM, TiplerHR.1984. Assessment of damage accumulation and property regeneration by hot isostatic pressingand heat treatment of laboratory-tested and service exposed IN738LC. Proceedings of superalloys, London, AIME. p. 73–82.
19.
RettbergLH, TsunekaneM, PollockTM.Rejuvenation of nickel-based superalloys GTD444 (DS) and RENEN5 (SX). Superalloys 2012. Pittsburgh: TMS; 2012. p. 341–349.
20.
LeeHS, KimDH, KimDS, Microstructural changes by heat treatment for single crystal superalloy exposed at high temperature. J Alloy Compd. 2013;561:135–141. doi: 10.1016/j.jallcom.2013.01.129
21.
KuipersJ, WiensK, RuggieroB.Rejuvenation heat treatment of single crystal gas turbine blades. ASME Turbo Expo. 2017:26–30. doi:10.1115/GT2017-63698.
22.
SchilkePW.Advanced gas turbine materials and coatings. GE Reference Library; 2004. p. 1–25.
23.
CheruvuNS, SwaminathanVP.Recovery of microstructure and mechanical properties of service run GTD-111 DS buckets. ASME. 1999: 1–6. doi:10.1115/99-GT-425.
24.
BaldanA.Review progress in Ostwald ripening theories and their applications to the γ′-precipitates in nickel-base superalloys part II nickel-base superalloys. J Mater Sci. 2002;37:2379–2405. doi: 10.1023/A:1015408116016
