The addition of 3 wt-% Zn to the traditional Al–Mg alloy doubled its strength. To understand the strengthening mechanism, the enhancement in strength with the variation in Mg content was studied. The grain boundary and solid solution strengthening decrease with the reduction in the Mg content; however, their contributions to the yield strength are insignificant. The contribution of precipitation strengthening to the yield strength is more than 80%; however, due to the unchanged precipitate characteristics, the strengthening effect changes slightly with the variation in the Mg content. The reduction in strength is primarily due to Mg solid solution strengthening. The variation in the ductility of Al–Mg–Zn alloys was studied by fracture analysis.
EmburyJD.Strengthening mechanisms in Al alloys–an overview of natural limits and engineering possibilities. Mat Sci Forum. 1996;217–222:57–70. doi: 10.4028/www.scientific.net/MSF.217-222.57
2.
KumarN, MishraRS.Additivity of strengthening mechanisms in ultrafine grained Al–Mg–Sc alloy. Mater Sci Eng A. 2013;580:175–183. doi: 10.1016/j.msea.2013.05.006
3.
HuJ, LuoG, ZhangJ, Interfacial microstructure and strengthening mechanism in Ti–6Al–4V reinforced Al-7075 alloy. Mater Sci Technol. 2018;34:199–208. doi: 10.1080/02670836.2017.1366738
4.
MalopheyevS, KulitskiyV, KaibyshevR.Deformation structures and strengthening mechanisms in an Al–Mg–Sc–Zr alloy. J Alloys Compd. 2017;698:957–966. doi: 10.1016/j.jallcom.2016.12.289
5.
HayesJS, KeyteR, PrangnellPB.Effect of grain size on tensile behaviour of a submicron grained Al–3wt.% Mg alloy produced by severe deformation. Mater Sci Technol. 2000;16:1259–1263. doi: 10.1179/026708300101507479
6.
MoradpourM, KhodabakhshiF, EskandariH.Microstructure-mechanical property relationship in an Al–Mg alloy processed by constrained groove pressing-cross route. Mater Sci Technol. 2018;34:1003–1017. doi: 10.1080/02670836.2017.1416906
7.
VarvenneC, LeysonGPM, GhazisaeidiM, Solute strengthening in random alloys. Acta Mater. 2017;124:660–683. doi: 10.1016/j.actamat.2016.09.046
8.
RyenØ, HolmedalB, NijsO, Strengthening mechanisms in solid solution aluminum alloys. Metall Mater Trans A. 2006;37:1999–2006. doi: 10.1007/s11661-006-0142-7
9.
JiangDM, KangSB, KimHW.Microstructure and mechanical properties of Al–Mg alloy sheets for autobody application. Mater Sci Technol. 1999;15:1401–1407. doi: 10.1179/026708399101505536
10.
YangXB, ChenJH, LiuJZ, A high-strength AlZnMg alloy hardened by the T-phase precipitates. J Alloys Compd. 2014;610:69–73. doi: 10.1016/j.jallcom.2014.04.185
11.
HouS, LiuP, ZhangD, Precipitation hardening behavior and microstructure evolution of Al–5.1Mg–0.15Cu alloy with 3.0Zn (wt%) addition. J Mater Sci. 2018;53:3846–3861. doi: 10.1007/s10853-017-1811-1
12.
LeeB-H, KimS-H, ParkJ-H, Role of Mg in simultaneously improving the strength and ductility of Al–Mg alloys. Mater Sci Eng A. 2016;657:115–122. doi: 10.1016/j.msea.2016.01.089
13.
HuskinsEL, CaoB, RameshKT.Strengthening mechanisms in an Al–Mg alloy. Mater Sci Eng A. 2010;527:1292–1298. doi: 10.1016/j.msea.2009.11.056
14.
MalopheyevS, KaibyshevR.Strengthening mechanisms in a Zr-modified 5083 alloy deformed to high strains. Mater Sci Eng A. 2015;620:246–252. doi: 10.1016/j.msea.2014.10.030
15.
SohiM, PooleWJ, SinclairCW, Yield strength of twin-belt cast Al–Mg–Sc–Zr alloy after annealing. Mater Sci Technol. 2015;31:460–467. doi: 10.1179/1743284714Y.0000000629
16.
CarrollMC, GoumaPI, DaehnGS, Effects of minor Cu additions on a Zn-modified Al-5083 alloy. Mater Sci Eng A. 2001;319–321:425–428. doi: 10.1016/S0921-5093(00)02021-9
17.
BigotA, AugerP, ChambrelandS, Atomic Scale Imaging and analysis of T′ precipitates in Al–Mg–Zn Alloys. Microsc Microanal Microstruct. 1997;8:103–113. doi: 10.1051/mmm:1997109
18.
MaQ, ZhangD, ZhuangL, Intergranular corrosion resistance of Zn modified 5××× series Al alloy during retrogression and re-aging treatment. Mater Charact. 2018;144:264–273. doi: 10.1016/j.matchar.2018.07.008
19.
WyrzykowskJW, GrabskiMW.The Hall-Petch relation in aluminium and its dependence on the grain boundary structure. Philos Mag A. 1986;53:505–520. doi: 10.1080/01418618608242849
20.
ThangarajuS, HeilmaierM, MurtyBS, On the estimation of true Hall-Petch constants and their role on the superposition law exponent in Al alloys. Adv Eng Mater. 2012;14:892–897. doi: 10.1002/adem.201200114
21.
PhillipsVA, SwainAJ, EborallR.Yield-point phenomena and Stretcher-strain markings in aluminum–magnesium alloys. J Inst Met. 1952;81:625.
22.
LloydDJ, CourtSA.Influence of grain size on tensile properties of Al–Mg alloys. Mater Sci Technol. 2003;19:1349–1354. doi: 10.1179/026708303225006088
23.
LubardaV.On the effective lattice parameter of binary alloys. Mech Mater. 2003;35:53–68. doi: 10.1016/S0167-6636(02)00196-5
24.
ArdellAJ.Precipitation hardening. Metall Mater Trans A. 1985;16:2131–2165. doi: 10.1007/BF02670416
25.
ClausenB, LorentzenT, LeffersT.Self-consistent modelling of the plastic deformation of fcc polycrystals and its implications for diffraction measurements of internal stresses. Acta Mater. 1998;46:3087–3098. doi: 10.1016/S1359-6454(98)00014-7
26.
BirolY.Effect of solute Mg on grain size of aluminium alloys. Mater Sci Technol. 2012;28:924–927. doi: 10.1179/1743284712Y.0000000024
27.
DingQ, ZhangD, ZuoJ, The effect of grain boundary character evolution on the intergranular corrosion behavior of advanced Al–Mg–3wt%Zn alloy with Mg variation. Mater Charact. 2018;146:47–54. doi: 10.1016/j.matchar.2018.09.044
28.
NembachE, NeiteG.Precipitation hardening of superalloys by ordered γ′-particles. Progr Mater Sci. 1985;29:177–319. doi: 10.1016/0079-6425(85)90001-5
29.
HuangJC, ArdellAJ.Addition rules and the contribution of δ’ precipitates to strengthening of aged Al–Li–Cu alloys. Acta Metall. 1988;36:2995–3006. doi: 10.1016/0001-6160(88)90182-4
30.
QiuD, ZhangM.Strengthening mechanisms and their superposition law in an age-hardenable Mg–10wt pct Y alloy. Metall Mater Trans A. 2012;43:3314–3324. doi: 10.1007/s11661-012-1162-0
31.
KendigKL, MiracleDB.Strengthening mechanisms of an Al–Mg–Sc–Zr alloy. Acta Mater. 2002;50:4165–4175. doi: 10.1016/S1359-6454(02)00258-6
32.
EmburyJD, LloydDJ, RamachandranTR.Strengthening mechanisms in aluminum alloys. In: VasudevanAK, DohertyRD, editor. Aluminum alloys-contemporary research and applications, vol. 31. London: Academic Press, Inc.; 1989. p. 579.
33.
IwahashiY, HoritaZ, NemotoM, Factors influencing the equilibrium grain size in equal-channel angular pressing: role of Mg additions to aluminium. Metall Mater Trans A. 1998;29:2503–2510. doi: 10.1007/s11661-998-0222-y
