In this study, newly developed fibre-metal laminates (Al-LiFMLs) were prepared by a lay-up process of a high-performance surface-modified glass fibres/phthalonitrile (GFs/PN) composite and Al–Li alloy. The results showed that varying the composite considerably affected the tensile properties of the Al-LiFMLs, as well as exhibiting enhancements over the properties of both the individual Al–Li alloys and GFs/PN composite constituents. For instance, when the number of composite layers varied from 6 to 14, the ultimate tensile strength of the Al-LiFMLs increased from 315 to 611 MPa. It was revealed that the failure mode displayed a more ductile behaviour (up to 20%) for all the developed Al-LiFMLs affected by the ductile fracture mode of the Al–Li alloy.
SinmazçelikT, AvcuE, BoraMÖ, A review: Fibre metal laminates, background, bonding types and applied test methods. Mater Des. 2011;32(7):3671–3685. doi: 10.1016/j.matdes.2011.03.011
3.
MedjahedA, DerradjiM, ZegaouiA, Mechanical and gamma rays shielding properties of a novel fiber-metal laminate based on a basalt/phthalonitrile composite and an Al-Li alloy. Compos Struct. 2019;210:421–429. doi: 10.1016/j.compstruct.2018.11.037
4.
MedjahedA, DerradjiM, ZegaouiA, Fabrication process, tensile, and gamma rays shielding properties of newly developed fiber metal laminates based on an Al–Li Alloy and Carbon fibers-Tungsten Carbide Nanoparticles reinforced phthalonitrile resin composite. Adv Eng Mater. 2018;0(0):1800779. doi: 10.1002/adem.201800779
5.
RiojaRJ, LiuJ.The Evolution of Al-Li Base Products for aerospace and Space applications. Metall Mater Trans A. 2012;43(9):3325–3337. doi: 10.1007/s11661-012-1155-z
6.
MedjahedA, MoulaH, ZegaouiA, Influence of the rolling direction on the microstructure, mechanical, anisotropy and gamma rays shielding properties of an Al-Cu-Li-Mg-X alloy. Mater Sci Eng: A. 2018;732:129–137. doi: 10.1016/j.msea.2018.06.074
7.
WangY, LiZ, YuT, Effect of Sc and Zr on microstructure and mechanical properties of As-Cast Al–Li–Cu Alloys. Adv Eng Mater. 2018;20(4):1700898. doi: 10.1002/adem.201700898
8.
YuT, LiB, MedjahedA, Impeding effect of the Al3(Er,Zr,Li) particles on planar slip and intergranular fracture mechanism of Al-3Li-1Cu-0.1Zr-X alloys. Mater Charact. 2019;147:146–154. doi: 10.1016/j.matchar.2018.10.023
9.
DonnadieuP, ShaoY, De GeuserF, Atomic structure of T1 precipitates in Al–Li–Cu alloys revisited with HAADF-STEM imaging and small-angle X-ray scattering. Acta Mater. 2011;59(2):462–472. doi: 10.1016/j.actamat.2010.09.044
10.
DorinT, DeschampsA, GeuserFD, Quantification and modelling of the microstructure/strength relationship by tailoring the morphological parameters of the T1 phase in an Al–Cu–Li alloy. Acta Mater. 2014;75:134–146. doi: 10.1016/j.actamat.2014.04.046
11.
PrasadNE, GokhaleA, WanhillR.Aluminum-lithium alloys: processing, properties, and applications. Butterworth-Heinemann; 2013.
12.
TolleyA, RadmilovicV, DahmenU.Segregation in Al3(Sc,Zr) precipitates in Al–Sc–Zr alloys. Scr Mater. 2005;52(7):621–625. doi: 10.1016/j.scriptamat.2004.11.021
13.
TerronesLAH, MonteiroSN.Composite precipitates in a commercial Al–Li–Cu–Mg–Zr alloy. Mater Charact. 2007;58(2):156–161. doi: 10.1016/j.matchar.2006.04.008
14.
DerradjiM, HennicheA, WangJ, High performance nanocomposites from Ti3SiC2 MAX phase and phthalonitrile resin. Polym Compos. 2018;39(10):3705–3711. doi: 10.1002/pc.24401
HennicheA, DerradjiM, WangJ, High-performance polymeric nanocomposites from phthalonitrile resin and silane surface–modified Ti3AlC2 MAX phase. High Perform Polym. 2017;30(4):427–436. doi: 10.1177/0954008317699678
17.
Gonzalez-CancheNG, Flores-JohnsonEA, CarrilloJG.Mechanical characterization of fiber metal laminate based on aramid fiber reinforced polypropylene. Compos Struct. 2017;172:259–266. doi: 10.1016/j.compstruct.2017.02.100
18.
LiX, ZhangX, ZhangH, Mechanical behaviors of Ti/CFRP/Ti laminates with different surface treatments of titanium sheets. Compos Struct. 2017;163:21–31. doi: 10.1016/j.compstruct.2016.12.033
19.
LiH, HuY, FuX, Effect of adhesive quantity on failure behavior and mechanical properties of fiber metal laminates based on the aluminum–lithium alloy. Compos Struct. 2016;152:687–692. doi: 10.1016/j.compstruct.2016.05.098
20.
LiH, HuY, XuY, Reinforcement effects of aluminum–lithium alloy on the mechanical properties of novel fiber metal laminate. Compos Part B-Eng2015;82:72–77. doi: 10.1016/j.compositesb.2015.08.013
21.
LiH, HuY, LiuC, The effect of thermal fatigue on the mechanical properties of the novel fiber metal laminates based on aluminum–lithium alloy. Compos Part A-Appl S. 2016;84:36–42. doi: 10.1016/j.compositesa.2016.01.004
22.
VargaC, MiskolcziN, BarthaL, Improving the mechanical properties of glass-fibre-reinforced polyester composites by modification of fibre surface. Mater Des. 2010;31(1):185–193. doi: 10.1016/j.matdes.2009.06.034
23.
OliveuxG, BailleulJ-L, SalleELGL.Chemical recycling of glass fibre reinforced composites using subcritical water. Compos Part A-Appl S. 2012;43(11):1809–1818. doi: 10.1016/j.compositesa.2012.06.008
24.
ShuaibNA, MativengaPT.Energy demand in mechanical recycling of glass fibre reinforced thermoset plastic composites. J Clean Prod. 2016;120:198–206. doi: 10.1016/j.jclepro.2016.01.070
25.
MedjahedA, HennicheA, DerradjiM, Effects of Cu/Mg ratio on the microstructure, mechanical and corrosion properties of Al-Li-Cu-Mg-X alloys. Mater Sci Eng A. 2018;718:241–249. doi: 10.1016/j.msea.2018.01.118
26.
DerradjiM, ZegaouiA, XuY-L, Toward advanced gamma rays radiation resistance and shielding efficiency with phthalonitrile resins and composites. Nucl Instrum Methods Phys Res Sect B. 2018;421:13–17. doi: 10.1016/j.nimb.2018.02.017
27.
DerradjiM, WangJ, LiuWb.High performance ceramic-based phthalonitrile micro and nanocomposites. Mater Lett. 2016;182:380–385. doi: 10.1016/j.matlet.2016.06.110
28.
Abu TalibAR, MohammedI.Mechanical properties of carbon fibre reinforced aluminium laminates using two different layering pattern for aero engine application. Adv in Mater Process Technol. 2019;5(1):123–131.
29.
BotelhoEC, SilvaRA, PardiniLC, A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures. Mater Res. 2006;9:247–256. doi: 10.1590/S1516-14392006000300002
30.
ZhengH, YangJ, WuR, Influence of Annealing Temperature on the microstructure and mechanical properties of Al/Mg/Al composite sheets fabricated by Roll bonding. Adv Eng Mater. 2016;18(10):1792–1798. doi: 10.1002/adem.201600304
31.
WuH, WangT, WuR, Effects of annealing process on the interface of Alternate α/β Mg-Li composite sheets prepared by Accumulative Roll bonding. J Mater Process Technol. 2018;254:265–276. doi: 10.1016/j.jmatprotec.2017.11.033
32.
ZhongF, WangT, WuR, Microstructure, texture, and mechanical properties of Alternate α/β Mg–Li composite sheets prepared by Accumulative Roll bonding. Adv Eng Mater. 2017;19(5):1600817. doi: 10.1002/adem.201600817
33.
TamilarasanU, KarunamoorthyL, PalanikumarK.Mechanical properties Evaluation of the Carbon Fibre reinforced Aluminium Sandwich composites. Mater Res. 2015;18:1029–1037. doi: 10.1590/1516-1439.017215
34.
BirolY.Pre-straining to improve the bake hardening response of a twin-roll cast Al–Mg–Si alloy. Scr Mater. 2005;52(3):169–173. doi: 10.1016/j.scriptamat.2004.10.001
35.
StarinkMJ, WangSC.Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys. Int Mater Rev. 2005;50(4):193–215. doi: 10.1179/174328005X14357
36.
ThomasonP.Ductile fracture of metals. Oxford: Pergamon press Oxford; 1990.
