Nano-sized iron-rich precipitates reinforced copper alloys achieve excellent mechanical properties. Capture mechanism of iron-rich precipitates into copper grains during solidification was described but needs further validation. Here, Cu-1.5Fe-0.5Co (wt-%) alloy is fabricated by gravity casting. Iron-rich precipitates in nano and submicron scale (mostly < 100 nm) are well dispersed in copper grain interior. Traditional pushing/engulfment transition (PET) models are used to interpret the capture process of iron-rich precipitates during copper solidification, but all fail to match the experimental results. The precipitates-interaction capture mechanism is most reasonable for describing the capture process.
WangZD, WangXW, WangQS, Fabrication of a nanocomposite from in situ iron nanoparticle reinforced copper alloy. Nanotechnology. 2009;20:075605. doi: 10.1088/0957-4484/20/7/075605
4.
ChenXH, WangZD, DingD, Strengthening and toughening strategies for tin bronze alloy through fabricating in-situ nanostructured grains. Mater Des. 2015;66:60–66. doi: 10.1016/j.matdes.2014.10.034
5.
ChenKX, PanSW, ZhuYZ, In situ observations of crack propagation in as-cast Cu-1.5Fe-0.5Co (wt%) alloy. Mater Sci Eng A. 2017;706:211–216. doi: 10.1016/j.msea.2017.08.055
6.
ChenKX, ChenXH, WangZD, Optimization of deformation properties in as-cast copper by microstructural engineering. Part I. microstructure. J Alloy Compd. 2018;763:592–605. doi: 10.1016/j.jallcom.2018.05.297
7.
LevashovEA, VakaevPV, ZamulaevaEI, Nanoparticle dispersion-strengthened coatings and electrode materials for electrospark deposition. Thin Solid Films. 2006;515:1161–1165. doi: 10.1016/j.tsf.2006.07.140
8.
WangJQ, ChangXC, HouWL, Crystallization behaviour of Al-based amorphous alloy and nanocomposites by rapid quenching. Phil Mag Lett. 2000;80:349–357. doi: 10.1080/095008300176128
9.
LeeJ, JungJY, LeeES, Microstructure and properties of titanium boride dispersed Cu alloys fabricated by spray forming. Mater Sci Eng A. 2000;277:274–283. doi: 10.1016/S0921-5093(99)00551-1
10.
SahaS, KulovitsA, SoffaWA, Synthesis of Fe–Pd and Fe–Pd/Ta magnetic nanocomposites by severe plastic deformation. J Appl Phys. 2005;97:301–303. doi: 10.1063/1.1847912
11.
ChenKX, ChenXH, DingD, Formation mechanism of in-situ nanostructured grain in cast Cu–10Sn–2Zn–1.5Fe–0.5Co (wt.%) alloy. Mater Des. 2016;94:338–344. doi: 10.1016/j.matdes.2016.01.064
12.
WangT, ChenXH, ShiaGD, Formation and capturing of nanoparticles in Cu-1wt. %Fe alloy melt during directional solidification process. J Iron Steel Res Int. 2017;24:411–415. doi: 10.1016/S1006-706X(17)30061-4
HosseiniVA, ShabestariSG, GholizadehR.Study on the effect of cooling rate on the solidification parameters, microstructure, and mechanical properties of LM13 alloy using cooling curve thermal analysis technique. Mater Des. 2013;50:7–14. doi: 10.1016/j.matdes.2013.02.088
15.
WatanabeY, MurakamiJ, MiuraH.Effect of annealing on saturation magnetization in deformed Cu–Fe alloys with transformed Fe particles. Mater Sci Eng A. 2002;338:299–304. doi: 10.1016/S0921-5093(02)00089-8
16.
MonzenR, TadaT, SeoT, Ostwald ripening of rod-shaped α-Fe particles in a Cu matrix. Mater Lett. 2004;58:2007–2011. doi: 10.1016/j.matlet.2003.12.018
17.
FujiiT, MoriT, KatoM.Crystallography and morphology of needle-like α-Fe precipitate particles in a Cu matrix. Acta Metall Mater. 1992;40:3413–3420. doi: 10.1016/0956-7151(92)90055-J
18.
DongQ, WangMP, ShenL, Diffraction analysis of α-Fe precipitates in a polycrystalline Cu–Fe alloy. Mater Charact. 2015;105:129–135. doi: 10.1016/j.matchar.2015.05.012
19.
KitaK, MonzenR.Coarsening of spherical α-Fe particles in a Cu matrix. Scr Mater. 2000;43:1039–1043. doi: 10.1016/S1359-6462(00)00488-7
20.
FujimuraY, MatsuiT, SemboshiS, Structure of thermal-aging induced Fe clusters and their effects on physical properties for Cu-1.2 at.% Fe alloy. J Alloy Compd. 2016;682:805–814. doi: 10.1016/j.jallcom.2016.05.021
21.
MonzenR.Face-centred cubic to body-centred cubic martensitic transformation of Fe-Co particles in a copper matrix. J Mater Sci Lett. 1992;11:56–58. doi: 10.1007/BF00720780
22.
WatanabeD, WatanabeC, MonzenR.Determination of the interface energies of spherical, cuboidal and octahedral face-centered cubic precipitates in Cu–Co, Cu–Co–Fe and Cu–Fe alloys. Acta Mater. 2009;57:1899–1911. doi: 10.1016/j.actamat.2008.12.028
23.
EasterlingKE, Miekk-ojaHM.The martensitig transformation of iron precipitates in a copper matrix. Acta Metall. 1967;15:1133–1141. doi: 10.1016/0001-6160(67)90388-4
24.
AbrahamsSC, GuttmanL, KasperJS.Neutron Diffraction Determination of Antiferromagnetism in face-centered cubic (γ) iron. Phys Rev. 1962;127:2052–2055 doi: 10.1103/PhysRev.127.2052
25.
EasterlingKE, WeatherlyGC.On the nucleation of martensite in iron precipitates. Acta Metall. 1969;17:845–852. doi: 10.1016/0001-6160(69)90104-7
26.
KinsmanKR, SprysJW, AsaroRJ.Structure of martensite in very small iron-rich precipitates. Acta Metall. 1975;23:1431–1442. doi: 10.1016/0001-6160(75)90152-2
27.
KatoM, MonzenR, MoriT.A stress-induced martensitic transformation of spherical iron particles in a Cu Fe alloy. Acta Metall. 1978;26:605–613. doi: 10.1016/0001-6160(78)90112-8
28.
BiselliC, MorrisDG.Microstructure and strength of Cu Fe in situ composites obtained from prealloyed Cu Fe powders. Acta Metall Mater. 1994;42:163–176. doi: 10.1016/0956-7151(94)90059-0
29.
ZuoXW, QuL, ZhaoCC, Nucleation and growth of γ-Fe precipitate in Cu-2%Fe alloy aged under high magnetic field. J Alloy Compd.2016;662:355–360. doi: 10.1016/j.jallcom.2015.12.046
30.
QuL, WangEG, HanK, Studies of electrical resistivity of an annealed Cu-Fe composite. J Appl Phys2013;113:173708. doi: 10.1063/1.4803716
31.
GluchowskiWJ, RdzawskiZM, StobrawaJP, Microstructure and properties of Cu-Nb Wire Composites. Arch Metall Mater2014;59:35–40. doi: 10.2478/amm-2014-0006
32.
ZuoXW, ZhuJZ, AnBL, Influence of Fe addition on microstructure and properties of Cu-Ag composite. Met Mater Int2017;23:974–983. doi: 10.1007/s12540-017-6656-2
33.
ZhaoCC, ZuoXW, WangEG, Strength of Cu-28 wt%Ag composite solidified under high magnetic field followed by cold drawing. Met Mater Int2017;23:369–377. doi: 10.1007/s12540-017-6417-2
34.
ZuoXW, GuoR, ZhaoCC, Microstructure and properties of Cu-6wt%Ag composite thermomechanical-processed after directionally solidifying with magnetic field. J Alloy Compd. 2016;676:46–53. doi: 10.1016/j.jallcom.2016.03.127
35.
ZuoXW, HanK, ZhaoCC, Precipitation and dissolution of Ag in ageing hypoeutectic alloys. J Alloy Compd. 2015;622:69–72. doi: 10.1016/j.jallcom.2014.10.037
36.
HanK, VasquezAA, XinY, Microstructure and tensile properties of nanostructured Cu-25wt%Ag. Acta Mater. 2003;51:767–780. doi: 10.1016/S1359-6454(02)00468-8
37.
ChenKX, ChenXH, DingD, Heterogeneous nucleation effect of in situ iron-rich nanoparticles on grain refinement of copper alloy. Mater Lett. 2016;168:188–191. doi: 10.1016/j.matlet.2016.01.027
38.
QianM.Heterogeneous nucleation on potent spherical substrates during solidification. Acta Mater. 2007;55:943–953. doi: 10.1016/j.actamat.2006.09.016
39.
ChenKX, KorzhavyiPA, DemangeG, Morphological instability of iron-rich precipitates in Cu Fe Co alloys. Acta Mater. 2019;163:55–67. doi: 10.1016/j.actamat.2018.10.013
40.
UhlmannDR, ChalmersB.Interaction between particles and a solid-liquid interface. J Appl Phys. 1964;35:2986–2993. doi: 10.1063/1.1713142
41.
ShangguanD, AhujaS.An analytical model for the interaction between an insoluble particle and an advancing solid/liquid interface. Metall Trans A. 1992;23:669–680. doi: 10.1007/BF02801184
42.
SkapskiAS.A theory of surface tension of solids – I application to metals. Acta Metall. 1956;4:576–582. doi: 10.1016/0001-6160(56)90159-6
43.
JiaZH.The liquid metal forming principle. 1st ed.Beijing: Peking University Press; 2011; in Chinese.
44.
ShibutaY, SuzukiT.Melting and nucleation of iron nanoparticles: a molecular dynamics study. Chem Phys Lett. 2007;445:265–270. doi: 10.1016/j.cplett.2007.07.098
45.
WatanabeD, WatanabeC, MonzenR.Effect of coherency on coarsening of second-phase precipitates in Cu-base alloys. J Mater Sci. 2008;43:3946–3953. doi: 10.1007/s10853-007-2373-4
46.
PotschkeJ, RoggeV.On the behaviour of foreign particles at an advancing solid-liquid interface. J Cryst Growth. 1989;94:726–738. doi: 10.1016/0022-0248(89)90097-3
47.
ZubkoAM, LobanovVG, NikonovaVV.Reaction of foreign particles with a crystallization front. Phys Crystallogr. 1973;18:239–241.
48.
TianS.The physical properties of materials. 1st ed. Beijing: Beijing University of Aeronautics and Astronautics press; 2004; in Chinese.
49.
TakamichiI, GuthrieRIL.The physical properties of liquid metals. (translated by X.A. Ping, L.W. Wang), 1st ed.Beijing: Science Press; 2006.
50.
GrayDE.American Institute of Physics Handbook, 1st ed. New York: McGraw-Hill; 1972.
51.
SurappaMK, RohatgiPK.Heat diffusivity criterion for the entrapment of particles by a moving solid-liquid interface. J Mater Sci Lett. 1981;16:562–564. doi: 10.1007/BF00738658
52.
StefanescuDM, MoitraA, KacarAS, The influence of buoyant forces and volume fraction of particles on the particle pushing/entrapment transition during directional solidification of Al/SiC and Al/graphite composites. Metall Trans A. 1990;21:231–239. doi: 10.1007/BF02656440
HuGX, CaiX, RongYH.Fundamentals of materials science. 3rd ed.Shanghai: Shanghai Jiao Tong University Press; 2010; in Chinese.
55.
JuretzkoFR, DhindawBK, StefanescuDM, Particle engulfment and pushing by solidifying interfaces: Part 1. Ground experiments. Metall Mater Trans A. 1998;29:1691–1696. doi: 10.1007/s11661-998-0091-4
56.
StefanescuDM, JuretzkoFR, DhindawBK, Particle engulfment and pushing by solidifying interfaces: Part II. Microgravity experiments and theoretical analysis. Metall Mater Trans A. 1998;29:1697–1706. doi: 10.1007/s11661-998-0092-3
AnandMS, AgarwalaRP.Diffusion of copper in iron. J Appl Phys. 1966;37:4248–4251. doi: 10.1063/1.1708006
59.
EgertonRF.Electron energy-Loss spectroscopy in the electron microscope. 3rd ed.New York: Springer; 2011.
60.
MukherjeeS, StefanescuDM.Analysis of liquid convection effects on the pushing-engulfment transition, State of the Art in Cast MMCs Edited by P.K. Rohatgi, TMS (The Minerals, Metals & Materials Society), 2000.
RingEA, JongeND.Video-frequency scanning transmission electron microscopy of moving gold nanoparticles in liquid. Micron. 2012;43:1078–1084. doi: 10.1016/j.micron.2012.01.010
63.
EinsteinA.Über die von der molekularkinetischen Theorie der wärme geforderte Bewegung von in ruhenden Flüssigkeiten suspendierten Teilchen. Ann. Phy. 1905;322:549–560. doi: 10.1002/andp.19053220806
64.
HuHQ.Metal solidification principle. 2nd ed.Beijing: China machine press; 2000; in Chinese.
65.
StefanescuDM, ShangguanD, von den BrinckenP.Particle engulfment and pushing by solidifying interfaces (PEPSI). Mater Sci Forum. 1991;77:25–42.
66.
LiDS, NielsenMH, LeeJRI, Direction-Specific Interactions Control crystal growth by Oriented Attachment. Science. 2012;336:1014–1018.
