In-situ magnesium matrix nano-composites were produced through a reaction of CO2 with the AZ91 alloy at a semi-solid temperature range. The process was performed at 595°C, which corresponded to about 10% of solid fraction, under shear and mixing conditions generated by a screw-barrel system. As a result, nano-scale native MgO (30–50 nm) and a small amount of Al4C3 carbide within an eutectic consisting of α(Mg), β-Mg17Al12 were formed. Homogeneously distributed α(Mg) globular grains with volume 8–12% were visible. AZ91 composites revealed yield strength of 220 MPa at compression strength of 460 MPa and hardness 103 ± 2 HV.
WeiL, DoudouY, GaofengQ, Microstructure evolution of semisolid Mg-2Zn-0.5Y alloy during isothermal heat treatment. Rare Met Mater Eng. 2016;45(8):1967–1972. doi: 10.1016/S1875-5372(16)30155-2
4.
RogalL.Opportunities in developing semi-solid processing: aluminum, magnesium, and high-temperature alloys. Mater Sci Technol, 2017; 33/7:759–764. doi: 10.1080/02670836.2017.1295212
5.
RogalL, GarzelG.Semi-solid state mixing of Mg-Zn-RE alloys—microstructure and mechanical properties. J Mater Process Technol. 2018;264:352–365. doi: 10.1016/j.jmatprotec.2018.09.012
6.
AvedesiaMM, BakerH.ASM specialty hand book: magnesium and magnesium alloys. Novelty, OH: ASM International: The Mater. Information Society; 1999, p. 54.
7.
YanH, HuangZX, QiuHX.Microstructure and mechanical properties of CNTs/A356 nanocomposites Fabricated by high-Intensity ultrasonic processing. Metall Mater Transact A. 2017;48(2):910–918. doi: 10.1007/s11661-016-3872-1
8.
HaiZY, XingYL.Review of recent studies in magnesium matrix composites. J Mater Sci. 2004;39(20):6153–6171. doi: 10.1023/B:JMSC.0000043583.47148.31
9.
LenelFV.Powder metallurgy: principles and applications. Portsmouth: Metal Powder Industry; 1980.
Tabandeh-KhorshidM, Jenabali JahromiSA, MoshksarMM.Mechanical properties of tri-modal Al matrix composites reinforced by nano- and submicron-sized Al2O3 particulates developed by wet attrition milling and hot extrusion. Mater Des. 2010;31(8):3880–3884. doi: 10.1016/j.matdes.2010.02.047
12.
YeHZ, LiuXY, LuanB.In situ synthesis of AlN in Mg–Al alloys by liquid nitridation. J Mater Process Technol. 2005;166:79–85. doi: 10.1016/j.jmatprotec.2004.06.033
13.
MabuchiM, KubotaK, HigashiK.Tensile strength, ductility and fracture of magnesium-silicon alloys. J Mater Sci. 1996;31(6):1529–1535. doi: 10.1007/BF00357861
14.
MabuchiM, KubotaK, HigashiK.Effect of hot extrusion on mechanical properties of a Mg-Si-Al alloy. Mater Lett. 1994;19(5-6):247–250. doi: 10.1016/0167-577X(94)90165-1
15.
MatinMA, LuL, GuptaM.Investigation of the reactions between boron and titanium compounds with magnesium. Scr Mater. 2001;45(4):479–486. doi: 10.1016/S1359-6462(01)01059-4
16.
BhingoleP, ChaudhariGP, NathSK.Processing, microstructure and properties of ultrasonically processed in situ MgO–Al2O3–MgAl2O4 dispersed magnesium alloy composites. Composites: Part A. 2014;66:209–217. doi: 10.1016/j.compositesa.2014.08.001
17.
ReddyAC.Constitutive behavior of AA5050/MgO metal matrix composites with interface debonding: the finite element method for uniaxial tension; 2000.
18.
MilickaK, CadekJ, RysP.High temperature creep mechanisms in magnesium. Acta Metall. 1970;18:1071–1082. doi: 10.1016/0001-6160(70)90005-2
19.
VickersW, GreenfieldP.The high temperature creep properties of compacted magnesium powder. J Nucl Mater. 1968;27:73–79. doi: 10.1016/0022-3115(68)90009-3
20.
UmedaJ, KondohK, ImaiH.Friction and wear behavior of sintered magnesium composite reinforced with CNT-Mg2Si/MgO. Mater Sci Eng A. 2009;504:157–162. doi: 10.1016/j.msea.2008.10.054
21.
JiangQC, WangHY, MaBX, Fabrication of B4C particulate reinforced magnesium matrix composite by powder metallurgy. J Alloys Compd. 2005;386:177–181. doi: 10.1016/j.jallcom.2004.06.015
22.
HanBX, DunandDC.Microstructure and mechanical properties of magnesiumcontaining high volume fractions of yttria dispersoids. Mater Sci Eng A. 2000;277(1–2):297–304. doi: 10.1016/S0921-5093(99)00074-X
23.
GentzbittelJM, ChuI, BurletH.The effect of hot isostatic pressing parameters on microstructure and mechanical properties of Eurofer powder HIPed material. J Nucl Mater. 2002;307–311:540–543. doi: 10.1016/S0022-3115(02)00972-8
24.
OksiutaZ, LewandowskaM, KurzydlowskiKJ, Influence of hot rolling and high speed hydrostatic extrusion on the microstructure and mechanical properties of an ODS RAF steel. J Nucl Mater. 2011;409:86–93. doi: 10.1016/j.jnucmat.2010.09.019
25.
JiG, BernardF, LaunoisS, Processing conditions, microstructure and mechanical properties of hetero-nanostructured ODS FeAl alloys produced by spark plasma sintering. Mater Sci Eng A. 2013;559:566–573. doi: 10.1016/j.msea.2012.08.142
26.
MoghadasiMA, Nili-AhmadabadiM, ForghaniF, Development of an oxide-dispersion-strengthened steel by introducing oxygen carrier compound into the melt aided by a general thermodynamic model. Sci Rep. 2016;6:38621. doi: 10.1038/srep38621
27.
JayalakshmiS, DezhiQ, SankaranarayananS, Microstructure and mechanical properties of Mg–Al alloys with in situ Al4C3 phase synthesised by CO2 incorporation during liquid state processing. Int J Microstruct Mater Propert. 2013;8(4–5):283–298.
28.
CzerwinskiF.The oxidation behaviour of an AZ91D magnesium alloy at high temperatures. Acta Mater. 2002;50:2639–2654. doi: 10.1016/S1359-6454(02)00094-0
29.
CzerwinskiF.Oxidation characteristics of magnesium alloy. JOM. 2012;64:1477–1483. doi: 10.1007/s11837-012-0477-z
30.
BalartMJ, PatelJB, FanZ.Melt Protection of Mg-Al based alloys. Metals (Basel). 2016;6(6):131. doi: 10.3390/met6060131
31.
FukutaT, ObunaiK, OzakiK, Improvement of mechanical properties of injection molded AZ91D alloy by mixing carbon black as a grain refinement additive. In Proceedings of the 10th International Conference on Magnesium Alloys and Their Applications; 2015 Oct 11–16; Jeju, Korea, p. 551–557.
32.
GohCS, GuptaM, WeiJ, Characterization of high Performance Mg/MgO nanocomposites. J Compos Mater. 2007;41(19):2325–2335. doi: 10.1177/0021998307075445
33.
LaurentV, JarryP, RegazzoniG, Processing-microstructure relationships in compocast magnesium/SiC. J Mater Sci. 1992;27(16):4447–4459. doi: 10.1007/BF00541578
34.
EmamyM, MahtaM, RasizadehJ.Formation of TiB2 particles during dissolution of TiAl3 in Al–TiB2 metal matrix composite using an in situ technique. Compos Sci Technol. 2006;66(7–8):1063–1066. doi: 10.1016/j.compscitech.2005.04.016
35.
RoyD, BasuB, BasuMA, Understanding the unlubricated friction and wear behavior of Fe-aluminide reinforced Al-based in-situ metal–matrix composite. Compos A Appl Sci Manuf. 2006;37(9):1464–1472. doi: 10.1016/j.compositesa.2005.06.022
36.
YangZR, WangSQ, GaoMJ, A new-developed magnesium matrix composite by reactive sintering. Compos A Appl Sci Manuf. 2008;39(9):1427–1432. doi: 10.1016/j.compositesa.2008.05.002
37.
EllinghamHJT.Reducibility of oxides and sulfides in metallurgical processes. J Soc Chem Ind (Lond.). 1944;63:125–133. doi: 10.1002/jctb.5000630501
38.
CzerwinskiF.Magnesium injection molding. New York: Springer; 2008.
39.
CarnahanR.Thixomolded magnesium: Its status and model relating structure and solid state properties. In Proceedings 3rd International Conference on Semisolid Processing of Alloys and Composites. Institute of Industrial Science; Tokyo; 1994. p. 1–11.
40.
JiS.Twin screw rheomolding of AZ91D magnesium alloys. In: TsutsuiY, KiuchiM, IchikawaK, editor. 7th International Conference on Semisolid Processing of Alloys and Composites. Tsukuba: National Institute of Advanced Industrial Science and Technology; 2002. p. 683–688.
41.
KorenaZ, RosensonaH, GutmanEM, Development of semisolid casting for AZ91 and AM50 magnesium alloys. J Light Met. 2002;2:81–87. doi: 10.1016/S1471-5317(02)00026-3
42.
CeschiniL, DahleA, GuptaM, Aluminum and magnesium metal matrix nanocomposites. Singapore: Springer Nature Pte Ltd; 2017.
43.
JonesH.Formation of microstructure in rapidly solidified materials and its effect on properties. Mater Sci Eng A. 1991;137:77–85. doi: 10.1016/0921-5093(91)90320-M
44.
LohmüllerA, ScharrerM, JenningR, Advances in magnesium injection molding (Thixomolding®). Neue Materialien; 2007.
45.
SolankiKN, OrlovD, SinghA, , editors. Grain refinement of Mg and its alloy by inoculation of in situ MgO particles. Magnesium technology. Pittsburgh: Springer; 2017.
AzarniyaA, SafaviMS, SoviziS, Metallurgical challenges in carbon nanotube-Reinforced metal matrix nanocomposites. Metals. 2017;7:384. doi: 10.3390/met7100384
48.
NimityongskulS, JonesM, ChoiH, Grain refining mechanisms in Mg–Al alloys with Al4C3 microparticles. Mater Sci Eng A. 2010;527(7–8):2104–2111. doi: 10.1016/j.msea.2009.12.030
49.
FanZ, ZuoYB, JiangB.A new technology for treating liquid melts with intensive melt shearing. Mater Sci Forum. 2011;690:141–144. doi: 10.4028/www.scientific.net/MSF.690.141
50.
FanZ, ZuoYB, JiangB, inventors. Apparatus and method for liquid metals treatment. UK Patent 1015498(7). 2010.
51.
SievertAD, PhysWZ.Solubility of D2 and H2 in palladium. Chemistry. 1936;34:158–164.
52.
AarstadK.Protective films on molten magnesium [dissertation]. Norway: Norwegian University of Science and Technology; 2004.
53.
CaoG, KobliskaJ, KonishiH, Tensile properties and microstructure of SiC nanoparticle-reinforced Mg-4Zn alloy fabricated by ultrasonic cavitation-based solidification processing. Metall Mater Trans A. 2008;39:880–886. doi: 10.1007/s11661-007-9453-6
54.
CaoG, KobliskaJ, KonishiH, Mg–6Zn/1.5%SiC nanocomposites fabricated by ultrasonic cavitation-based solidification processing. J Mater Sci. 2008;43(16):5521–5526. doi: 10.1007/s10853-008-2785-9
ThadelaS, MandalB, DasP, Rheological behavior of semi-solid TiB2 reinforced Al composite. Trans Nonferrous Met Soc China. 2015;25(9):2827–2832. doi: 10.1016/S1003-6326(15)63908-5
57.
WangHY, JiangQC, WangY, Fabrication of TiB2 particulate reinforced magnesium matrix composites by powder metallurgy. Mater Lett. 2004;58(27–28):3509–3513. doi: 10.1016/j.matlet.2004.04.038
58.
WangX.Nanocomposites. Hauppauge: Nova Science Publishers Inc; 2004.
59.
TanakaK, IijimaS.Carbon nanotubes and graphene. Amsterdam: Elsevier; 2014.
60.
SzklarzZ, BisztygaM, KrawiecH, Corrosion behavior of ZE41A magnesium alloy after thixoforming process and heat treatments. Appl Surf Sci. 2017;405:529–539. doi: 10.1016/j.apsusc.2017.02.076
61.
WangY, FanZ, ZhouX, Characterisation of magnesium oxide and its interface with α-Mg in Mg–Al-based alloys. Philos Mag Lett. 2011;91(8):516–529. doi: 10.1080/09500839.2011.591744
