The heat-treatment (HT) schedule and selected annealing parameters have a substantial effect on the microstructure and mechanical properties of medium-Mn-steels. The structure morphology depends on the fact, whether the austenite-reverted transformation takes place from deformed (one-step HT) or non-deformed (two-step HT) microstructures. Depending on the intercritical annealing temperature, the stability of the retained austenite can be altered to a large extent. As a result, the mechanical properties can be adjusted from high strength with excellent ductility to very high strength with reasonable ductility. The present contribution, therefore, elucidates the dependence of the microstructural characteristics and material behaviour on the HT parameters for medium-Mn alloy compositions with different Mn-contents.
This paper is part of a Thematic Issue on Medium Manganese Steels.
MatlockDK, SpeerJG, De MoorE, Recent developments in advanced high strength sheet steels for automotive. Applications: An Overview Jestech. 2012;15(1):1–12.
2.
RashidMS.Dual phase steels. Annu Rev Mater Sci. 1981;11:245–266. doi: 10.1146/annurev.ms.11.080181.001333
3.
MatsumuraO, SakumaY, TakechiH.Trip and its kinetic aspects in austempered 0.4C-1.5Si-0.8Mn steel. Scr Metall.1987;21(10):1301–1306. doi: 10.1016/0036-9748(87)90103-7
4.
PichlerA, TraintS, HebesbergerT, Processing of thin sheet multiphase steel grades. Steel Res Int. 2007;78(3):216–223. doi: 10.1002/srin.200705883
5.
De CoomanBC, KwonO, ChinKG.State-of-the-knowledge on TWIP steel. Mater Sci Technol. 2012;28(5):513–527. doi: 10.1179/1743284711Y.0000000095
6.
MatlockD, SpeerJ.Third generation of AHSS: microstructure design concepts. In: HaldarA, SuwasS, BhattacharjeeD, editor. Microstructure and texture in steels. London, UK: Springer; 2009. p. 185–205.
7.
LiuL, HeB, HuangM.The role of transformation-induced plasticity in the development of advanced high strength steels. Adv Eng Mater. 2018;1701083:1–17.
8.
EdmondsD.V, HeK, RizzoF.C, Quenching and partitioning martensite — A novel steel heat treatment. Mater. Sci. Eng. A. 2006;438-440:25–34. doi: 10.1016/j.msea.2006.02.133
9.
SantofimiaM.J, ZhaoL, PetrovR, Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel. Acta Mater. 2011;59(15):6059–6068. doi: 10.1016/j.actamat.2011.06.014
10.
ArlazarovA, OllatM, MasseJP, Influence of partitioning on mechanical behavior of Q&P steels. Mater. Sci. Eng. A. 2016;661:79–86. doi: 10.1016/j.msea.2016.02.071
11.
HausmannK, KrizanD, Spiradek-HahnK, The influence of Nb on transformation behavior and mechanical properties of TRIP-assisted bainitic-ferritic sheet steels. Mater. Sci. Eng. A. 2013;588:142–150. doi: 10.1016/j.msea.2013.08.023
12.
HoferC, WinkelhoferF, ClemensH, Morphology change of retained austenite during austempering of carbide-free bainitic steel. Mater. Sci. Eng. A. 2016;664:236–246. doi: 10.1016/j.msea.2016.04.005
13.
EbnerS, SuppanC, SchnitzerR, Microstructure and mechanical properties of a low C steel subjected to bainitic or quenching and partitioning heat treatments. Mater. Sci. Eng. A. 2018;735:1–9. doi: 10.1016/j.msea.2018.08.026
14.
GrajcarA, KuziaR, ZaleckiW.Third generation of AHSS with increased fraction of retained austenite for the automotive industry. ACME. 2012;12(3):334–341.
15.
SteinederK, SchneiderR, KrizanD, Investigation on the microstructural evolution in a medium-Mn steel (X10Mn5) after intercritical annealing. HTM J Heat Treatm Mat. 2015;70(1):19–25. doi: 10.3139/105.110248
16.
SteinederK, SchneiderR, KrizanD, Comparative investigation of phase transformation behavior as a function of annealing temperature and cooling rate of two medium-Mn steels. Steel Res Int. 2015;86(11):1179–1186. doi: 10.1002/srin.201400551
17.
WangC, ShiJ, WangCY, Development of ultrafine Lamellar ferrite and austenite duplex structure in 0.2C5Mn steel during ART-annealing. ISIJ Int2011;51(4):651–656. doi: 10.2355/isijinternational.51.651
18.
ArlazarovA, HazotteA, BouazizO, Characterization of microstructure formation and mechanical behavior of an advanced medium Mn steel In: Proceedings from the Materials Science & Technology Conference; 2012 Oct 7-11; Pittsburgh, PA. p. 1124-1131.
19.
SchneiderR, RahoferM, SteinederK, Metallographische Untersuchung von Medium-Mn-Stählen. Special Issue Prakt Met. 2014;46:77–82.
20.
SuhDW, ParkSJ, LeeTH, Influence of Al on the microstructural evolution and mechanical behavior of low-carbon, manganese transformation-induced-plasticity steel. Metall Mater Trans A. 2010;41(2):397–408. doi: 10.1007/s11661-009-0124-7
21.
HuangH, MatsumuraO, FurukawaT.Retained austenite in low carbon, manganese steel after intercritical heat treatment. Mater Sci Technol. 1994;10:621–626. doi: 10.1179/mst.1994.10.7.621
22.
MerwinMJ.Microstructure and properties of cold rolled and annealed low-carbon manganese TRIP steels. Iron Steel Technol. 2008;5(10):66–84.
23.
GibbsPJ, De MoorE, MerwinMJ, Austenite stability effects on tensile behavior of manganese-enriched-austenite transformation-induced plasticity. Steel Metall Mater Trans A. 2011;42(12):3691–3702. doi: 10.1007/s11661-011-0687-y
24.
HanJ, LeeS, JungJG, The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe–9Mn–0.05C steel. Acta Mater2014;78:369–377. doi: 10.1016/j.actamat.2014.07.005
25.
LeeS, LeeSJ, DeCoomanBC.Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning. Scr Mater. 2011;65:225–228. doi: 10.1016/j.scriptamat.2011.04.010
26.
SteinederK, KrizanD, SchneiderR, The effects of intercritical annealing temperature and initial microstructure on the stability of retained austenite in a 0.1C-6Mn steel. Mater Sci Forum. 2016;879:1847–1852. doi: 10.4028/www.scientific.net/MSF.879.1847
27.
MillerRL.Ultrafine-grained microstructures and mechanical properties of alloy steels. Metall Trans. 1972;3:905–912. doi: 10.1007/BF02647665
28.
JacquesPJ, FurnémontQ, LaniF, Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing. Acta Mater. 2007;55(11):3681–3693. doi: 10.1016/j.actamat.2007.02.029
29.
ChiangJ, BoydJD, PilkeyAK.Effect of microstructure on retained austenite stability and tensile behavior in an aluminum-alloyed TRIP steel. Mater Sci Eng A. 2015;638:132–142. doi: 10.1016/j.msea.2015.03.069
30.
PeisslP, SchneiderR, RahoferM, The effect of Niobium on the microstructure and phase transformation kinetics in low-carbon medium manganese steels. HTM J Heat Treatm Mat.2015;70(6):267–275. doi: 10.3139/105.110273
31.
De MoorE, MatlockDK, SpeerJG, Austenite stabilization through manganese enrichment. Scr Mater. 2011;64(2):185–188. doi: 10.1016/j.scriptamat.2010.09.040
32.
LeeS, De CoomanBC.On the selection of the optimal intercritical annealing temperature for medium Mn TRIP steel. Metall Mater Trans A. 2013;44(11):5018–5024. doi: 10.1007/s11661-013-1860-2
33.
GomezM, GarciaI, DeardoAJ.The role of new ferrite on retained austenite stabilization Al-TRIP steels. ISIJ Int. 2010;50(1):139–146. doi: 10.2355/isijinternational.50.139
34.
SantofimiaMJ, ZhaoL, SietsmaJ.Microstructural evolution of a low-carbon steel during application of quenching and partitioning heat treatment after partial austenitization. Metall Mater Trans A. 2009;40:46–57. doi: 10.1007/s11661-008-9701-4
35.
SteinederK, KrizanD, SchneiderR, On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels. Acta Mater. 2017;139:39–50. doi: 10.1016/j.actamat.2017.07.056
36.
HanJ, KangSH, LeeSJ, Fabrication of bimodal-grained Al-free medium Mn steel by double intercritical annealing and its tensile properties. J Alloys Compd. 2016;681:580–588. doi: 10.1016/j.jallcom.2016.04.014
37.
ZhangY, DingH.Ultrafine also can be ductile: on the essence of Lüders band elongation in ultrafine-grained medium manganese steel. Mater Sci Eng A. 2018;733:220–223. doi: 10.1016/j.msea.2018.07.052
38.
SarosiekAM, OwenWS.On the importance of extrinsic transformation accommodation hardening in Dual-phase steel. Scr Metall. 1983;17(2):227–231. doi: 10.1016/0036-9748(83)90103-5
39.
ErdoganM, PriestnerR.Effect of epitaxial ferrite on yielding and plastic flow in dual phase steel in tension and compression. Mater Sci Technol. 1999;15:1273–1284. doi: 10.1179/026708399101505383
40.
DaviesRG.The deformation behavior of a vanadium-strengthened dual phase steel. Metall Mater Trans A. 1978;9:41–52. doi: 10.1007/BF02647169
41.
SugimotoK, UsuiN, KobayashiM, Effects of volume fraction and stability of TRIP-aided of retained austenite on ductility dual-phase steels. ISIJ Inter. 1992;32(12):1311–1318. doi: 10.2355/isijinternational.32.1311
