In the present study, we design a novel hot stamping steel containing high amounts of C and Si and micro-alloying element (i.e. Nb). The steel was subjected to quenching and partitioning (Q&P) process. The new Q&P treated hot stamping steel exhibits a significantly improved mechanical property in terms of strength, ductility and impact toughness compared with the traditional 22MnB5 hot stamping steel. The influence of partitioning time on the microstructure and mechanical properties was investigated. The retained austenite (RA) fraction and the carbon content of RA significantly increased with higher partitioning times. With increasing partitioning time, the uniform elongation, total elongation, strength-ductility balance and impact energy was also remarkably enhanced. The maximum strength-ductility balance achieves around 23 GPa %.
LiuS, XiongZ, GuoH, The significance of multi-step partitioning: processing–structure–property relationship in governing high strength-high ductility combination in medium-manganese steels. Acta Mater. 2017;124:159–172. doi: 10.1016/j.actamat.2016.10.067
2.
LuWJ, QinRS.Stability of martensite with pulsed electric current in dual-phase steels. Mater Sci Eng A. 2016;677:252–258. doi: 10.1016/j.msea.2016.08.123
3.
ChiangJ, LawrenceB, BoydJD, Effect of microstructure on retained austenite stability and work hardening of TRIP steels. Mater Sci Eng A. 2011;528:4516–4521. doi: 10.1016/j.msea.2011.02.032
4.
BiroE, McDermidJR, VignierS, Decoupling of the softening processes during rapid tempering of a martensitic steel. Mater Sci Eng A. 2014;615:395–404. doi: 10.1016/j.msea.2014.07.102
5.
SohnSS, ChoiK, KwakJ-H, Novel ferrite–austenite duplex lightweight steel with 77% ductility by transformation induced plasticity and twinning induced plasticity mechanisms. Acta Mater. 2014;78:181–189. doi: 10.1016/j.actamat.2014.06.059
6.
MoriK, BarianiPF, BehrensBA, Hot stamping of ultra-high strength steel parts. CIRP Ann. 2017;66:755–777. doi: 10.1016/j.cirp.2017.05.007
7.
MerkleinM, WielandM, LechnerM, Hot stamping of boron steel sheets with tailored properties: a review. J Mater Process Technol. 2016;228:11–24. doi: 10.1016/j.jmatprotec.2015.09.023
8.
LeschC, KwiatonN, KloseFB.Advanced high strength steels (AHSS) for automotive applications − tailored properties by smart microstructural adjustments. Steel Res Int. 2017;88:1700210. doi: 10.1002/srin.201700210
9.
KarbasianH, TekkayaAE.A review on hot stamping. J Mater Process Technol. 2010;210:2103–2118. doi: 10.1016/j.jmatprotec.2010.07.019
10.
ZhangS, HuangY, SunB, Effect of Nb on hydrogen-induced delayed fracture in high strength hot stamping steels. Mater Sci Eng A. 2015;626:136–143. doi: 10.1016/j.msea.2014.12.051
11.
SpeerJ, MatlockDK, De CoomanBC, Carbon partitioning into austenite after martensite transformation. Acta Mater. 2003;51:2611–2622. doi: 10.1016/S1359-6454(03)00059-4
12.
KongH, ChaoQ, CaiMH, One-step quenching and partitioning treatment of a commercial low silicon boron steel. Mater Sci Eng A. 2017;707:538–547. doi: 10.1016/j.msea.2017.09.038
13.
KruglaM, RanaR, DasS.Ductile ultra high strength hot stamped steel obtained by Q&P treatments. Mater Sci Technol. 2017;34:268–281. doi: 10.1080/02670836.2017.1371409
14.
LinkeBM, GerberT, HatscherA, Impact of Si on microstructure and mechanical properties of 22MnB5 Hot stamping steel treated by quenching & partitioning (Q&P). Metall Mater Trans A. 2017;49:54–65. doi: 10.1007/s11661-017-4400-7
15.
LiuH, JinX, DongH, Martensitic microstructural transformations from the hot stamping, quenching and partitioning process. Mater Charact. 2011;62:223–227. doi: 10.1016/j.matchar.2010.12.003
16.
LiuH, LuX, JinX, Enhanced mechanical properties of a hot stamped advanced high-strength steel treated by quenching and partitioning process. Scr Mater. 2011;64:749–752. doi: 10.1016/j.scriptamat.2010.12.037
DijkNH, ButtAM, ZhaoL, Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling. Acta Mater. 2005;53:5439–5447. doi: 10.1016/j.actamat.2005.08.017
19.
ZhuB, LiuZ, WangY, Application of a model for quenching and partitioning in hot stamping of high-strength steel. Metal Mater Trans A. 2018;49:1304–1312. doi: 10.1007/s11661-018-4484-8
20.
NishibataT, KojimaN.Effect of quenching rate on hardness and microstructure of hot-stamped steel. J Alloys Compd. 2013;577:S549–S554. doi: 10.1016/j.jallcom.2011.12.154
21.
LinT, SongH-W, ZhangS-H, Microstructure, mechanical properties, and toughening mechanisms of a new hot stamping-bake toughening steel. Metal Mater Trans A. 2015;46:4038–4046. doi: 10.1007/s11661-015-3020-3
22.
PortterDA, EasterlingKE.Phase transformation in metals and alloys. London: Chapman & Hall; 1992.
23.
KimH-J, JeonS-H, YangW-S, Effects of titanium content on hydrogen embrittlement susceptibility of hot-stamped boron steels. J Alloys Compd. 2018;735:2067–2080. doi: 10.1016/j.jallcom.2017.12.004
24.
NagaoA, MartinML, DadfarniaM, The effect of nanosized (Ti,Mo)C precipitates on hydrogen embrittlement of tempered lath martensitic steel. Acta Mater. 2014;74:244–254. doi: 10.1016/j.actamat.2014.04.051
25.
ZhangJC, DiHS, DengYG, Microstructure and mechanical property relationship in an ultrahigh strength 980MPa grade high-Al low-Si dual phase steel. Mater Sci Eng A. 2015;645:232–240. doi: 10.1016/j.msea.2015.08.016
26.
ZhangJ, DiH, DengY, Effect of martensite morphology and volume fraction on strain hardening and fracture behavior of martensite–ferrite dual phase steel. Mater Sci Eng A. 2015;627:230–240. doi: 10.1016/j.msea.2015.01.006
27.
ZhaoZ, LiangJ, ZhaoA, Effects of the austensitizing temperature on the mechanical properties of cold-rolled medium-Mn steel system. J Alloys Compd. 2017;691:51–59. doi: 10.1016/j.jallcom.2016.08.093
28.
WengY, DongH, GanY.Advanced steels: the recent scenario in steel science and technology. Springer-Verlag Berlin Heidelberg: Metallurgical Industry Press; 2011.
29.
ZhaoJ, JiangZ.Thermomechanical processing of advanced high strength steels. Prog Mater Sci. 2018;94:174–242. doi: 10.1016/j.pmatsci.2018.01.006
