The slag-free self-shielded flux-cored wire with simultaneous addition of ferroniobium (Fe-Nb) and ferrotitanium (Fe-Ti) was developed to fabricate the iron-based hardfacing alloys. The transfer coefficients of Nb and titanium of slag-free self-shielded flux-cored wire were 91.2 and 63.8%, respectively. The changes in microstructures indicate that Nb and Ti addition shifted the carbon concentration in the remaining liquid to one corresponding to the near eutectic state owing to the formation of (Nb, Ti)C which consumed carbon. The wear loss of the hardfacing alloy with 18 wt-% Fe-Nb and 6 wt-% Fe-Ti addition was the smallest among all the alloys owing to the formation of reinforced uniform quadrangle-shaped (Nb, Ti)C carbides in the refined microstructure and the highest hardness.
WangB, HuYW, YangXF, Microstructure and properties of Nb-bearing high-strength low-alloy surfacing layers. Mater Sci Technol. 2017;33:1004–1012. doi: 10.1080/02670836.2016.1258155
2.
LiuDS, LiuRP, WeiYH, Properties of cobalt based hardfacing deposits with various carbon contents. Surf Eng. 2013;29:627–632. doi: 10.1179/1743294413Y.0000000162
3.
FarnezeHN, JorgeJCF, Souza deLFG, Comparative study of high-strength steel weld metals obtained by the SMAW and FCAW processes for offshore applications and mooring chains. Weld Join. 2010;24:903–910.
4.
QiLH, JinZL, ZhangJM, Influence factors of X80 pipeline steel girth welding with self-shielded flux-cored wire. Mater Sci Technol. 2017;33:592–601. doi: 10.1080/02670836.2016.1238646
5.
MajaME, MarumaMG, MampuruLA, Effect of niobium on the solidification structure and properties of hypoeutectic high-chromium white cast irons’. J S Afr I Min Metall. 2016;116:981–986. doi: 10.17159/2411-9717/2016/v116n10a14
6.
LiuS, WangZ, ShiZ, Experiments and calculations on refining mechanism of NbC on primary M7C3 carbide in hypereutectic Fe-Cr-C alloy. J Alloys Compd. 2017;713:108–118. doi: 10.1016/j.jallcom.2017.04.167
7.
HsiehCC, LiuYC, WangJS, Microstructural evolution with various Ti contents in Fe-based hardfacing alloys using a GTAW technique. Met Mater Int. 2014;20:701–712. doi: 10.1007/s12540-014-4015-0
8.
ZhiX, XingJ, FuH, Effect of titanium on the as-cast microstructure of hypereutectic high chromium cast iron. Mater Charact. 2008;59:1221–1226. doi: 10.1016/j.matchar.2007.10.010
9.
LiuHY, SongZL, CaoQ, Microstructure and properties of Fe-Cr-C hardfacing alloys reinforced with TiC-NbC. J Iron Steel Res Int. 2016;23:276–280. doi: 10.1016/S1006-706X(16)30045-0
10.
LiuDS, WeiP.Properties of silicon-added, iron-based, slag-free, self-shielded flux-cored wire. Weld J. 2015;94:351–357.
11.
LiuDS, LiuRP, WeiYH, Microstructure and wear properties of Fe–15Cr–2.5 Ti–2C–xB wt.% hardfacing alloys. Appl Surf Sci. 2013;271:253–259. doi: 10.1016/j.apsusc.2013.01.169
12.
LiuDS, LiuRP, WeiYH.Influence of tungsten on microstructure and wear resistance of iron base hardfacing alloy. Mater Sci Technol. 2014;30:316–322. doi: 10.1179/1743284713Y.0000000359
RichardsonFD.Physical chemistry of melts in metallurgy. London: Academic Press; 1974.
15.
ZhiXH, XingJD, FuHG, Effect of niobium on the as-cast microstructure of hypereutectic high chromium cast iron. Mater Lett. 2008;62:857–860. doi: 10.1016/j.matlet.2007.06.084
16.
LampkeT, WielageB, PokhmurskaH, Development of particle-reinforced nanostructured iron-based composite alloys for thermal spraying. Surf Coat Technol. 2011;205:3671–3676. doi: 10.1016/j.surfcoat.2011.01.003
17.
AugusHT.Cast iron: physical and engineering properties. London: Butterworths; 1976.
18.
LiuL, XuY, WuH, Preparation of in situ (Fe, Cr)7C3 / Fe composite coating by centrifugal casting. Surf Eng. 2011;27:587–590. doi: 10.1179/026708410X12683118611220
19.
ChangCM, ChenLH, LinCM, Microstructure and wear characteristics of hypereutectic Fe–Cr–C cladding with various carbon contents. Surf Coat Technol. 2010;205:245–250. doi: 10.1016/j.surfcoat.2010.06.021
20.
Zum GahrKH.Microstructure and wear of materials. New York: Elsevier; 1987.
21.
BuchananVE, ShipwayPH, McCartneyDG.Microstructure and abrasive wear behaviour of shielded metal arc welding hardfacings used in the sugarcane industry. Wear. 2007;263:99–110. doi: 10.1016/j.wear.2006.12.053
22.
OhH, LeeS, JungJY, Correlation of microstructure with the wear resistance and fracture toughness of duocast materials composed of high-chromium white cast iron and low-chromium steel. Metall Mater Trans A. 2001;32:515–524. doi: 10.1007/s11661-001-0068-z
23.
Zum GahrKH.Microstructure and wear of materials. New York: Elsevier; 1987.
