Effects of added Al–5Ti–B master alloys on precipitation of iron-rich intermetallics and mechanical properties of A356 cast alloys with high Fe content (1.5 wt-%) were investigated using image analysis, scanning electron microscopy, and tensile testing. Results show that added Al–5Ti–B has apparent refinement on α (Al) grain size of A356 alloys that have high Fe content. 12 wt-% Al–5Ti–B is beneficial for improving mechanical properties of A356 cast alloys with high Fe content. Improved mechanical properties can be attributed to refined microstructure, the proper amounts of TiB2 and Ti(AlSi)3, and decreased porosity. An excessive amount of Al–5Ti–B deteriorates mechanical properties of alloys because it leads to the formation of large secondary intermetallics and increased porosity.
GreenAS.Aluminum recycling and processing for energy conservation and sustainability. Materials Park ( OH): ASM International; 2007.
2.
LiuK, CaoX, ChenXG.Solidification of iron-rich intermetallic phases in Al-4.5Cu-0.3Fe cast alloy. Metall Mater Trans A. 2011;42(7):2004–2016. doi: 10.1007/s11661-010-0578-7
3.
CaoX, CampbellJ.Morphology of β-Al5FeSi phase in Al-Si cast alloys. Mater Trans. 2006;47(5):1303–1312. doi: 10.2320/matertrans.47.1303
4.
TunçayT, BayoğluS.The effect of iron content on microstructure and mechanical properties of A356 cast alloy. Metall Mater Trans B. 2017;48(2):794–804. doi: 10.1007/s11663-016-0909-1
5.
CaoX, CampbellJ.The solidification characteristics of Fe-rich intermetallics in Al-11.5 Si-0.4 Mg cast alloys. Metall Mater Trans A. 2004;35(5):1425–1435. doi: 10.1007/s11661-004-0251-0
6.
HwangJY, DotyHW, KaufmanMJ.The effects of Mn additions on the microstructure and mechanical properties of Al-Si-Cu casting alloys. Mater Sci Eng A. 2008;488(1):496–504. doi: 10.1016/j.msea.2007.12.026
7.
LiZ, LimodinN, TandjaouiA, Influence of Sr, Fe and Mn content and casting process on the microstructures and mechanical properties of AlSi7Cu3 alloy. Mater Sci Eng A. 2017;689:286–297. doi: 10.1016/j.msea.2017.02.041
8.
SeifeddineS, JohanssonS, SvenssonIL.The influence of cooling rate and manganese content on the β-Al5FeSi phase formation and mechanical properties of Al-Si-based alloys. Mater Sci Eng A. 2008;490(1):385–390. doi: 10.1016/j.msea.2008.01.056
9.
SamuelAM, PennorsA, VilleneuveC, Effect of cooling rate and Sr-modification on porosity and Fe-intermetallics formation in Al-6.5% Si-3.5% Cu-Fe alloys. Int J Cast Metal Res. 2000;13(4):231–253. doi: 10.1080/13640461.2000.11819406
10.
TsaiYC, ChouCY, LeeSL, Effect of trace La addition on the microstructures and mechanical properties of A356 (Al-7Si-0.35Mg) aluminum alloys. J Alloys Compd. 2009;487(1):157–162. doi: 10.1016/j.jallcom.2009.07.183
11.
WanBB, ChenWP, LiuLS, Effect of trace yttrium addition on the microstructure and tensile properties of recycled Al-7Si-0.3Mg-1.0Fe casting alloys. Mater Sci Eng A. 2016;666:165–175. doi: 10.1016/j.msea.2016.04.036
12.
ChanyathunyarojK, PatakhamU, KouS, Microstructural evolution of iron-rich intermetallic compounds in scandium modified Al-7Si-0.3Mg alloys. J Alloys Compd. 2017;692:865–875. doi: 10.1016/j.jallcom.2016.09.132
13.
MondolfoLF.Aluminum alloys: structure and properties. London: Butterworths; 1976.
14.
Haro-RodríguezS, Goytia-ReyesRE, DwivediDK, On influence of Ti and Sr on microstructure, mechanical properties and quality index of cast eutectic Al–Si–Mg alloy. Mater Des. 2011;32(4):1865–1871. doi: 10.1016/j.matdes.2010.12.012
15.
Haro-RodríguezS, Goytia-ReyesRE, DwivediDK, The effect of Al-5Ti-1B on microstructure and mechanical properties of Al-12Si-xFe alloy. Mater Manuf Processes. 2012;27(6):599–604. doi: 10.1080/10426914.2011.560230
16.
Suárez-PeñaB, Asensio-LozanoJ.Influence of Sr modification and Ti grain refinement on the morphology of Fe-rich precipitates in eutectic Al–Si die cast alloys. Scripta Mater. 2006;54(9):1543–1548. doi: 10.1016/j.scriptamat.2006.01.029
17.
RakhmonovJ, TimelliG, BonolloF, Influence of grain refiner addition on the precipitation of Fe-rich phases in secondary AlSi7Cu3Mg alloys. Int J Metal Cast. 2017;11(2):294–304. doi: 10.1007/s40962-016-0076-9
18.
SmithT, O'ReillyK, KumarS, Influence of grain-refiner addition on the morphology of Fe-bearing intermetallics in a semi-solid processed Al-Mg-Si alloy. Metal Mater Trans A. 2013;44(11):4866–4871. doi: 10.1007/s11661-013-1934-1
19.
SamuelAM, DotyHW, ValtierraS, Effect of Fe, Sr, P, Ti and undercooling on the precipitation of β-Al5FeSi in A319.2 type alloys. Int J Met. Cast. 2017;11(4):675–687.
20.
GuptaR, ChaudhariGP, DanielBSS.Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al3Ti by salt addition. Composites Part B. 2018;140:27–34. doi: 10.1016/j.compositesb.2017.12.005
21.
LiuX, LiuY, HuangD, Tailoring in-situ TiB2 particulates in aluminum matrix composites. Mater Sci Eng A. 2017;705:55–61. doi: 10.1016/j.msea.2017.08.047
22.
BidmeshkiC, AboueiV, SaghafianH, Effect of Mn addition on Fe-rich intermetallics morphology and dry sliding wear investigation of hypereutectic Al-17.5% Si alloys. J Mater Res Technol. 2016;5(3):250–258. doi: 10.1016/j.jmrt.2015.11.008
23.
FarkooshAR, PekguleryuzM.Enhanced mechanical properties of an Al–Si–Cu–Mg alloy at 300 °C: effects of Mg and the Q-precipitate phase. Mater Sci Eng A. 2015;621:277–286. doi: 10.1016/j.msea.2014.10.080
24.
ZerenM, KarakulakE.Microstructural chracterisation of Al–Si–xTi cast alloys. Mater Sci Technol. 2009;25(10):1211–1214. doi: 10.1179/174328408X382190
25.
ChenXG, FortierM.Tialsi intermetallic formation and its impact on the casting processing in Al–Si alloys. J Mater Process Technol. 2010;210(13):1780–1786. doi: 10.1016/j.jmatprotec.2010.06.009
26.
GaoT, LiP, LiY, Influence of Si and Ti contents on the microstructure, microhardness and performance of TiAlSi intermetallics in Al–Si–Ti alloys. J Alloys Compd. 2011;509(31):8013–8017. doi: 10.1016/j.jallcom.2011.05.032
27.
ShaG, O'ReillyK, CantorB, Effect of grain refiner on intermetallic phase formation in directional solidification of 6xxx series wrought Al alloys. Mater Sci Forum. 2000;331–337:253–258. doi: 10.4028/www.scientific.net/MSF.331-337.253
LuL, DahleAK.Iron-rich intermetallic phases and their role in casting defect formation in hypoeutectic Al-Si alloys. Metall Mater Trans A. 2005;36(13):819–835. doi: 10.1007/s11661-005-1012-4
30.
PandeCS, CooperKP.Nanomechanics of Hall–Petch relationship in nanocrystalline materials. Prog Mater Sci. 2009;54(6):689–706. doi: 10.1016/j.pmatsci.2009.03.008
31.
TongXC, GhoshAK.Fabrication of in situ TiC reinforced aluminum matrix composites. J Mater Sci. 1998;33(22):5365–5374. doi: 10.1023/A:1004494116119
32.
LiQL, XiaXD, LanYF, Effect of rare earth cerium addition on the microstructure and tensile properties of hypereutectic Al-20%Si alloy. J Alloys Compd. 2013;562(1):25–32. doi: 10.1016/j.jallcom.2013.02.016
33.
TaylorJA.The effect of iron in Al-Si casting alloys, 35th Australian Foundry Institute National Conference (AFI); 2004. p. 148–157.
34.
WuX, ZhangH, ZhangF, Effect of cooling rate and Co content on the formation of Fe-rich intermetallics in hypoeutectic Al7Si0.3Mg alloy with 0.5% Fe. Mater Charact. 2018;139:116–124. doi: 10.1016/j.matchar.2018.02.029
35.
DongX, ZhangY, AmirkhanlouS, High performance gravity cast Al9Si0.45Mg0.4Cu alloy inoculated with AlB2 and TiB2. J Mater Process Technol. 2018;252:604–611. doi: 10.1016/j.jmatprotec.2017.10.028
36.
GaoQ, WuSL, LÜSL, Preparation of in-situ 5 vol% TiB2 particulate reinforced Al-4.5Cu alloy matrix composites assisted by improved mechanical stirring process. Mater Des. 2016;94:79–86. doi: 10.1016/j.matdes.2016.01.023
