Effect of thermal treatment on the evolution of delta ferrite was studied in 11Cr–3Co–2.3W steel. Ferrite-forming alloy elements promoted the formation of delta ferrite during thermo-mechanical processing. The results of JMatPro and chromium equivalent calculations indicated that 11Cr–3Co–2.3W steel partially contained delta ferrite. Cr and W were segregated in/around delta ferrite. Delta ferrite had a bamboo-type morphology and it contained MX-type carbonitrides inside and the Laves phase at the interface between delta ferrite and martensite. On annealing, delta ferrite dissolved especially during the early stage of annealing. After ageing at 600°C for 500 h, some Laves phases were observed in delta ferrite which is regarded as a favourable nucleation site. In the meantime, its precipitation resulted in the reduction of dissolved W and Mo in the matrix.
KaybyshevR, SkorobogatykhV, ShchenkovaI.New martensitic steels for fossil power plant: creep resistance. Phys Met Met. 2010;109:186–200. doi: 10.1134/S0031918X10020110
2.
DudkoV, BelyakovA, MolodovD, Microstructure evolution and pinning of boundaries by precipitates in a 9 pct Cr heat resistant steel during creep. Metall MaterTrans A.2013;44A:162–172. doi: 10.1007/s11661-011-0899-1
3.
YamadaK, IgarashiM, MunekiS, Effect of Co addition on microstructure in high Cr ferritic steels. ISIJ Int. 2007;43:1438–1443. doi: 10.2355/isijinternational.43.1438
4.
AbeF.Analysis of creep rates of tempered martensitic 9%Cr steel based on microstructure evolution. Mater Sci Eng A. 2009;510:64–69. doi: 10.1016/j.msea.2008.04.118
5.
KimT, HanC, KimS, Effects of ferrite content on the tensile strength and impact toughness of 2.25Cr-1Mo-0.25 V steels. Mater Sci Forum. 2010;655:537–555.
6.
XiongY, HeT, LiH, Annealing effects on microstructure and mechanical properties of cryorolled Fe-25Cr-20Ni steel. Metall Mater Trans A. 2017;703:68–75.
7.
LiS, EliniyazZ, SunF, Effect of thermo-mechanical treatment on microstructure and mechanical properties of P92 heat resistant steel. Metall Mater Trans A. 2013;559:882–888.
8.
FedorovaI, KipelovaA, BelyakovA, Microstructure evolution in an advanced 9 pct Cr martensitic steel during creep at 923 K (650 °C). Metall Mater Trans A. 2013;44A:128–135. doi: 10.1007/s11661-012-1182-9
9.
LiS, EliniyazZ, ZhangL, Microstructural evolution of delta ferrite in SAVE12 steel under heat treatment and short-term creep. Mater Charact. 2012;73:144–152. doi: 10.1016/j.matchar.2012.08.009
10.
KipelovaA, OdnobokovaM, BelyakovA, Effect of Co on creep behavior of a P911 steel. Metall Mater Trans A. 2012;44A:577–583.
11.
KazeminezhadM.Prediction of the mechanical properties of rods after cold forging and heat treatment. Int J Adv Manuftech. 2013;69:2071–2079. doi: 10.1007/s00170-013-5189-1
12.
KostkaA, TakKG, HellmigRJ, On the contribution of carbides and micrograin boundaries to the creep strength of tempered martensite ferritic steels. Acta Mater. 2007;55:539–550. doi: 10.1016/j.actamat.2006.08.046
13.
KipelovaA, KaibyshevR, BelyakovA, Microstructure evolution in a 3%Co modified P911 heat resistant steel under tempering and creep conditions. Mater Sci Eng A. 2011;528:1280–1286. doi: 10.1016/j.msea.2010.10.006
14.
YanP, LiuZ, BaoH, Effect of normalizing temperature on the strength of 9Cr–3W–3Co martensitic heat resistant steel. Mater Sci Eng A. 2014;597:148–156. doi: 10.1016/j.msea.2013.12.068
15.
ChenS, JinX, RongL.Improvement in high temperature oxidation resistance of 9%Cr ferritic–martensitic steel by enhanced diffusion of Mn. Oxid Met. 2016;85:189–203. doi: 10.1007/s11085-015-9596-6
16.
FedoseevaA, DudovaN, KaibyshevR.Creep strength breakdown and microstructure evolution in a 3%Co modified P92 steel. Mater Sci Eng A. 2016;654:1–12. doi: 10.1016/j.msea.2015.12.027
17.
FedorovaI, KipelovaA, BelyakovA, Microstructure evolution in an advanced 9 pct Cr martensitic steel during creep at 923 K(650 °C). Metall Mater Trans A. 2013;44:128–135. doi: 10.1007/s11661-012-1182-9
18.
NeidelA, FischerB, RiesenbeckS, Transformation of delta ferrite into sigma phase in metastable austenitic stainless steels after long-term high-temperature service exposure. Prakt Metallogr. 2014;51:259–279. doi: 10.3139/147.110278
19.
SoleymaniS, OjoO, RichardsN.Effect of composition on the formation of delta ferrite in 304L austenitic stainless steels during hot deformation. J Mater Eng Perform. 2015;24:499–504. doi: 10.1007/s11665-014-1290-3
20.
BeresL.Proposed modification to Schaeffler diagram for chrome equivalents and carbon for more accurate prediction of martensite content. Weld J. 1998;77:273–280.
21.
RyuSH, YuJ.A new equation for the Cr equivalent in 9 to 12 pct Cr steels. Metall Mater Trans A. 1998;29:1573–1578. doi: 10.1007/s11661-998-0080-7
22.
WieczerzakK, BalaP, DziurkaR, Experimental and thermodynamic study of selected in-situ composites from the Fe-Cr-Ni-Mo-C system. Arch Metall Mater. 2016;61:1241–1247. doi: 10.1515/amm-2016-0205
23.
FedoseevaA, DudovaN, KaibyshevR.Creep strength breakdown and microstructure evolution in a 3%Co modified P92 steel. Mater Sci Eng A. 2016;654:1–12. doi: 10.1016/j.msea.2015.12.027
24.
HamadaK, TokunoK, TomitaY, Effects of precipitate shape on high temperature strength of modified 9Cr–1Mo steels. SIJ Int. 1995;35:86–91.
25.
TsuchidaY, OkamotoK, TokunagaY.Improvement of creep rupture strength of 9Cr1Mo-V-Nb-N steel by thermomechanical control process. ISIJ INT. 2007;35:309–316. doi: 10.2355/isijinternational.35.309
26.
PanaitC, Zielińska-LipiecA, KozielT, Evolution of dislocation density, size of subgrains and MX-type precipitates in a P91 steel during creep and during thermal ageing at 600°C for more than 100,000 h. Mater Sci Eng A. 2010;527:4062–4069. doi: 10.1016/j.msea.2010.03.010
27.
LiH, MitchellD.Microstructural characterization of P91 steel in the virgin, service exposed and post-service re-normalized conditions. Steel Res Int. 2013;84:1302–1308. doi: 10.1002/srin.201300055
28.
LuQ, XuW, ZwaagSVD.The computational design of w and co-containing creep resistant steels with barely coarsening laves phase and M23C6 as the strengthening precipitates. Metall Mater Trans A. 2014;45:6067–6074. doi: 10.1007/s11661-014-2557-x
29.
AbeF.Effect of fine precipitation and subsequent coarsening of Fe2W laves phase on the creep deformation behavior of tempered martensitic 9Cr-W steels. Metall Mater Trans A. 2005;36:321–332. doi: 10.1007/s11661-005-0305-y
30.
AkhlaghiM, SteinerT, MekaSR, Lattice-parameter change induced by accommodation of precipitate/matrix misfit; misfitting nitrides in ferrite. Acta Mater. 2015;98:254–262. doi: 10.1016/j.actamat.2015.07.017
31.
ShenY, JiB, ZhouX.M5c2 carbide precipitates in a high-Cr martensitic steel. Met Mater Int. 2014;20:503–506. doi: 10.1007/s12540-014-3014-5
32.
FedoseevaA, KozlovP, DudkoV, Microstructural changes in steel 10Kh9V2MFBR during creep for 40000 hours at 600°C. Phys Met Metallogr. 2015;116:1047–1056. doi: 10.1134/S0031918X15080049
33.
KobayashiS, SawadaK, HaraT, The formation and dissolution of residual δ ferrite in ASME Grade 91 steel plates. Mater Sci Eng A. 2014;592:241–248. doi: 10.1016/j.msea.2013.10.058
34.
ZhangXF, KomizoY.Visual analysis of solidification and δ–γ transformations in steels. Mater Sci Technol. 2013;29:631–635. doi: 10.1179/1743284712Y.0000000183
35.
SureshG, KishorP, DasguptaA, Microstructure and corrosion behavior of laser melted 304L SS Weldment in nitric acid medium. J Mater Eng Perform. 2016;26:1–10.
36.
NeidelA, FischerB, RiesenbeckS, Transformation of delta ferrite into sigma phase in metastable austenitic stainless steels after long-term high-temperature service exposure. Prakt Metallogr. 2014;51:259–279. doi: 10.3139/147.110278
37.
GaneshBJ, RajuS, RaiAK, Differential scanning calorimetry study of diffusional and martensitic phase transformations in some 9 wt.%Cr low carbon ferritic steels. Mater Sci Technol. 2011;27:500–512. doi: 10.1179/026708309X12506933873260
38.
BrühlF, CerjakH, SchwaabP, Metallkundliche Untersuchungen am Grundwerkstoff und an Schweißverbindungen des 9%-Chromstahles X10 CrMoVNb 9 1. Steel Res. 1991;62:75–82. doi: 10.1002/srin.199101254
39.
LiJ, LiuJ, JiangB, Influence of high temperature pre-deformation on the dissolution rate of delta ferrites in martensitic heat-resistant steels. Met Mater Int. 2017;2:239–245. doi: 10.1007/s12540-017-6473-7
