Effects of yttrium on microstructure and properties of reduced activation ferritic-martensitic steel

Abstract

This study investigates the inclusions, microstructure, tensile properties, and impact toughness of reduced activation ferritic/martensitic (RAFM) steels with different Y contents (0.006, 0.034 and 0.071 wt-%). Owing to the pinning of the grain boundary to the Y inclusions (which refines the original austenite grain size) and an existing Fe–Cr–Ta–Y–S–O phase, the tensile strength at both room and high temperatures increased with increasing Y content (below 0.071%). Increasing the Y content to 0.034 wt-% decreased the ductile-to-brittle transition temperature (DBTT). However, when the Y content reached 0.071 wt-%, the DBTT increased as the Y precipitated into blocky yttrium-rich inclusions. The microstructure, tensile properties, and impact toughness of the RAFM steel were optimised at a Y content of approximately 0.034 wt-%.