In this study, SiC nanoparticles (∼50 nm, 3 vol%) are homogenously incorporated within an Al–Mg alloy metal matrix during multi-step friction-stir processing (FSP) to fabricate an Al-matrix surface nanocomposite. A fundamental understanding is developed, correlating microstructural features and crystallographic textural components in the context of the material flow pattern and operative dynamic restoration phenomena using electron backscattering diffraction and high resolution-transmission electron microscopy analysis. The annealed base metal does not contain any preferred orientation and its texture is completely random. Incorporation of SiC nanoparticles via FSP results in significant grain structural refinement down to the size of ∼1.4 µm and changing the textural component towards the Goss/Cubic and P1/P2 dominant fibre components in the centre of stirred zone.
SharmaV, PrakashU, KumarBVM.Surface composites by friction stir processing: a review. J Mater Process Technol. 2015;224:117–134. doi: 10.1016/j.jmatprotec.2015.04.019
2.
SuryanarayanaC, Al-AqeeliN.Mechanically alloyed nanocomposites. Prog Mater Sci. 2013;58:383–502. doi: 10.1016/j.pmatsci.2012.10.001
3.
SuryanarayanaC.Mechanical alloying and milling. Prog. Mater Sci. 2001;46:1–184. doi: 10.1016/S0079-6425(99)00010-9
4.
MishraRS, MaZY, CharitI.Friction stir processing: a novel technique for fabrication of surface composite. Mater Sci Eng A. 2003;341:307–310. doi: 10.1016/S0921-5093(02)00199-5
5.
MaZY.Friction stir processing technology: a review. Metall Mater Trans A. 2008;39:642–658. doi: 10.1007/s11661-007-9459-0
6.
KhodabakhshiF, KokabiAH, SimchiA.Reactive friction-stir processing of nanocomposites: effects of thermal history on microstructure–mechanical property relationships. Mater Sci Technol. 2017;33:1776–1789. doi: 10.1080/02670836.2017.1318244
7.
MishraRS, MaZY.Friction stir welding and processing. Mater Sci Eng R. 2005;50:1–78. doi: 10.1016/j.mser.2005.07.001
8.
KhodabakhshiF, ArabS, ŠvecP, Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing: dispersion, microstructure, stability, and strengthening. Mater Charact. 2017;132:92–107. doi: 10.1016/j.matchar.2017.08.009
9.
KhodabakhshiF, GerlichA, ŠvecP.Fabrication of a high strength ultra-fine grained Al-Mg-SiC nanocomposite by multi-step friction-stir processing. Mater Sci Eng A. 2017;698:313–325. doi: 10.1016/j.msea.2017.05.065
10.
KhodabakhshiF, GerlichA, ŠvecP.Reactive friction-stir processing of an Al-Mg alloy with introducing multi-walled carbon nano-tubes (MW-CNTs): microstructural characteristics and mechanical properties. Mater Charact. 2017;131:359–373. doi: 10.1016/j.matchar.2017.07.027
11.
KhodabakhshiF, GerlichAP, SimchiA, Hot deformation behavior of an aluminum-matrix hybrid nanocomposite fabricated by friction stir processing. Mater Sci Eng A. 2015;626:458–466. doi: 10.1016/j.msea.2014.12.110
12.
KhodabakhshiF, NoskoM, GerlichAP.Effects of graphene nano-platelets (GNPs) on the microstructural characteristics and textural development of an Al-Mg alloy during friction-stir processing. Surf Coat Technol. 2018;335:288–305. doi: 10.1016/j.surfcoat.2017.12.045
13.
KhodabakhshiF, SimchiA, KokabiA.Surface modifications of an aluminum-magnesium alloy through reactive stir friction processing with titanium oxide nanoparticles for enhanced sliding wear resistance. Surf Coat Technol. 2017;309:114–123. doi: 10.1016/j.surfcoat.2016.11.060
14.
KhodabakhshiF, SimchiA, KokabiAH, Friction stir processing of an aluminum-magnesium alloy with pre-placing elemental titanium powder: in-situ formation of an Al3Ti-reinforced nanocomposite and materials characterization. Mater. Charact.2015;108:102–114. doi: 10.1016/j.matchar.2015.08.016
15.
IzadiH, SandstromR, GerlichAP.Grain growth behavior and Hall–Petch strengthening in friction stir processed Al 5059. Metall Mater Trans A. 2014;45:5635–5644. doi: 10.1007/s11661-014-2492-x
16.
KumarN, MishraRS.Ultrafine-grained Al-Mg-Sc alloy via friction-stir processing. Metall Mater Trans A. 2013;44:934–945. doi: 10.1007/s11661-012-1461-5
17.
WangB, LeiBB, ZhuJX, EBSD study on microstructure and texture of friction stir welded AA5052-O and AA6061-T6 dissimilar joint. Mater Des. 2015;87:593–599. doi: 10.1016/j.matdes.2015.08.060
18.
FondaRW, KniplingKE.Texture development in friction stir welds. Sci Technol Weld Joining. 2011;16:288–294. doi: 10.1179/1362171811Y.0000000010
19.
KhodabakhshiF, SimchiA, KokabiAH, Effects of stored strain energy on restoration mechanisms and texture components in an aluminum–magnesium alloy prepared by friction stir processing. Mater Sci Eng A. 2015;642:204–214. doi: 10.1016/j.msea.2015.07.001
20.
KhodabakhshiF, SimchiA, KokabiAH, Influence of hard inclusions on microstructural characteristics and textural components during dissimilar friction-stir welding of an PM Al–Al2O3 –SiC hybrid nanocomposite with AA1050 alloy. Sci Technol Weld Joining. 2017;22:412–427. doi: 10.1080/13621718.2016.1251714
21.
KhodabakhshiF, SimchiA, KokabiAH, Microstructure and texture development during friction stir processing of Al–Mg alloy sheets with TiO2 nanoparticles. Mater Sci Eng A. 2014;605:108–118. doi: 10.1016/j.msea.2014.03.008
22.
LoorentzYG.KoJ.Effect of differential speed rolling strain on microstructure and mechanical properties of nanostructured 5052 Al alloy. Alloys Compd. 2014;586:S205–S209. doi: 10.1016/j.jallcom.2012.10.128
23.
BenedykJC.3 - Aluminum alloys for lightweight automotive structures A2 - Mallick, P.K, Materials, Design and Manufacturing for Lightweight Vehicles, Woodhead Publishing; 2010. p. 79–113.
24.
KhodabakhshiF, SimchiA, KokabiAH, Similar and dissimilar friction-stir welding of an PM aluminum-matrix hybrid nanocomposite and commercial pure aluminum: microstructure and mechanical properties. Mater Sci Eng A. 2016;666:225–237. doi: 10.1016/j.msea.2016.04.078
25.
KhodabakhshiF, SimchiA.The role of microstructural features on the electrical resistivity and mechanical properties of powder metallurgy Al-SiC-Al2O3 nanocomposites. Mater Des.2017;130:26–36. doi: 10.1016/j.matdes.2017.05.047
26.
AbbasiM, NelsonTW, SorensenCD.Transformation and deformation texture study in friction stir processed API X80 pipeline steel. Metall Mater Trans A. 2012;43:4940–4946.
27.
ASTM standard E384-99. Standard test method for microindentation hardness of materials. Annual Book of ASTM Standards; ASTM, West Conshohocken; 1999 Jan 3.
28.
ASTM standard E8M. Tension testing of metallic materials. Annual Book of ASTM Standards; ASTM, West Conshohocken; 1998 Jan 3.
29.
KhodabakhshiF, HaghshenasM, EskandariH, Hardness−strength relationships in fine and ultra-fine grained metals processed through constrained groove pressing. Mater Sci Eng A. 2015;636:331–339. doi: 10.1016/j.msea.2015.03.122
30.
KhodabakhshiF, SimchiA, KokabiAH, Effects of nanometric inclusions on the microstructural characteristics and strengthening of a friction-stir processed aluminum–magnesium alloy. Mater Sci Eng A. 2015;642:215–229. doi: 10.1016/j.msea.2015.06.081
31.
SakaiT, BelyakovA, KaibyshevR, Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions. Prog Mater Sci.2014;60:130–207. doi: 10.1016/j.pmatsci.2013.09.002
32.
ZhouF, LiaoXZ, ZhuYT, Microstructural evolution during recovery and recrystallization of a nanocrystalline Al-Mg alloy prepared by cryogenic ball milling. Acta Mater.2003;51:2777–2791. doi: 10.1016/S1359-6454(03)00083-1
33.
McNelleyTR, SwaminathanS, SuJQ.Recrystallization mechanisms during friction stir welding/processing of aluminum alloys. Scr Mater.2008;58:349–354. doi: 10.1016/j.scriptamat.2007.09.064
34.
JataKV, SemiatinSL.Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys. Scr Mater. 2000;43:743–749. doi: 10.1016/S1359-6462(00)00480-2
35.
NadammalN, KailasSV, SzpunarJ, Restoration mechanisms during the friction stir processing of aluminum alloys. Metall Mater Trans A. 2015;46:2823–2828. doi: 10.1007/s11661-015-2902-8
36.
KhodabakhshiF, SimchiA, KokabiAH, Reactive friction stir processing of AA 5052–TiO2 nanocomposite: process–microstructure–mechanical characteristics. Mater Sci Technol. 2015;31:426–435. doi: 10.1179/1743284714Y.0000000573
37.
AhmedMMZ, WynneBP, RainforthWM, Microstructure, crystallographic texture and mechanical properties of friction stir welded AA2017A. Mater Charact. 2012;64:107–117. doi: 10.1016/j.matchar.2011.12.005
38.
SuhuddinUFHR, MironovS, SatoYS, Grain structure and texture evolution during friction stir welding of thin 6016 aluminum alloy sheets. Mater Sci Eng A. 2010;527:1962–1969. doi: 10.1016/j.msea.2009.11.029
