The development of the ausferritic transformation of a ductile iron was analysed using a novel cellular automaton-finite difference model, which considers geometrical details of the microstructure, nucleation of the new phase at graphite nodule surface, contact between growing phases, and carbon diffusion in austenite. The role of nucleation, austenite carbon enrichment, and contact between phases in the different stages of the growth kinetics was studied. Moreover, a parametric study was performed to investigate the influences of graphite nodule size, and austenitizing and austempering temperatures on the required time to end the transformation and final phase fractions. The obtained results are in agreement with experimental data reported in the literature.
BhadeshiaHKDH.Bainite in steels. 2nd ed. London: IOM Communications; 2001.
2.
ChangLC.An analysis of retained austenite in austempered ductile iron. Mater Trans A. 2003;34(2):211–217. doi: 10.1007/s11661-003-0323-6
3.
ThomsonRC, JamesJS, PutmanDC.Modelling microstructural evolution and mechanical properties of austempered ductile iron. Mater Sci Technol. 2000;16(11–12):1412–1419. doi: 10.1179/026708300101507370
4.
KapturkiewiczW, BurbelkoAA, LelitoJ, et al. Modelling of ausferrite growth in ADI. Int J Cast Met Res. 2003;16(1–3):287–292. doi: 10.1080/13640461.2003.11819597
5.
HeppE, HurevichV, SchäferW.Integrated modeling and heat treatment simulation of austempered ductile iron. IOP Conf Ser: Mater Sci Eng. 2012;33(1):012076.
6.
FraśE, GórnyM, TyrałaE, et al. Effect of nodule count on austenitising and austempering kinetics of ductile iron castings and mechanical properties of thin walled iron castings. Mater Sci Technol. 2012;28(12):1391–1396. doi: 10.1179/1743284712Y.0000000088
7.
BoccardoAD, DardatiPM, CelentanoDJ, et al. A microscale model for ausferritic transformation of austempered ductile irons. Mater Trans A. 2017;48(1):524–535. doi: 10.1007/s11661-016-3816-9
8.
ReesGI, BhadeshiaHKDH.Bainite transformation kinetics part 1 modified model. Mater Sci Technol. 1992;8(11):985–993. doi: 10.1179/mst.1992.8.11.985
9.
LiDZ, XiaoNM, LanYJ, et al. Growth modes of individual ferrite grains in the austenite to ferrite transformation of low carbon steels. Acta Mater. 2007;55(18):6234–6249. doi: 10.1016/j.actamat.2007.07.041
10.
RaghavanS, SahaySS.Modeling the topological features during grain growth by cellular automaton. Comput Mater Sci. 2009;46(1):92–99. doi: 10.1016/j.commatsci.2009.01.028
11.
HalderC, MadejL, PietrzykM.Discrete micro-scale cellular automata model for modelling phase transformation during heating of dual phase steels. Arch Civ Mech Eng. 2014;14(1):96–103. doi: 10.1016/j.acme.2013.07.001
12.
SieradzkiL, MadejL.A perceptive comparison of the cellular automata and Monte Carlo techniques in application to static recrystallization modeling in polycrystalline materials. Comput Mater Sci. 2013;67:156–173. doi: 10.1016/j.commatsci.2012.08.047
13.
YangBJ, ChuzhoyL, JohnsonML.Modelling of reaustenitization of hypoeutectoid steels with cellular automaton method. Comput Mater Sci. 2007;41(2):186–194. doi: 10.1016/j.commatsci.2007.04.001
14.
LanYJ, LiDZ, LiYY.Modeling austenite decomposition into ferrite at different cooling rate in low-carbon steel with cellular automaton method. Acta Mater. 2004;52(6):1721–1729. doi: 10.1016/j.actamat.2003.12.045
15.
Beltran-SanchezL, StefanescuDM.Growth of solutal dendrites: a cellular automaton model and its quantitative capabilities. Mater Trans A. 2003;34(2):367–382. doi: 10.1007/s11661-003-0338-z
16.
SongKJ, DongZB, FangK, et al. Cellular automaton modelling of dynamic recrystallisation microstructure evolution during friction stir welding of titanium alloy. Mater Sci Technol. 2014;30(6):700–711. doi: 10.1179/1743284713Y.0000000389
17.
DardatiPM, GodoyLA, CervettoGA, et al. Simulación de la micromecánica en la solidificación de una fundición de grafito esferoidal [Micromechanics simulation during the solidification of SG cast-iron]. Rev Int Mét Num Cálc Dis Ing. 2005;21(4):327–344. Spanish.
18.
BurbelkoAA, GurgulD, KapturkiewiczW, et al. Cellular automaton modeling of ductile iron microstructure in the thin wall. Arch Foundry Eng. 2011;11(4):13–18.
19.
RintoulMD, TorquatoS.Reconstruction of the structure of dispersions. J Colloid Interface Sci. 1997;186(2):467–476. doi: 10.1006/jcis.1996.4675
20.
ChenR, XuQ, LiuB.Cellular automaton simulation of three-dimensional dendrite growth in Al-7Si-Mg ternary aluminum alloys. Comput Mater Sci. 2015;105:90–100. doi: 10.1016/j.commatsci.2015.04.035
21.
YescasMA, BhadeshiaHKDH.Model for the maximum fraction of retained austenite in austempered ductile cast iron. Mater Sci Eng A. 2002;333(1–2):60–66. doi: 10.1016/S0921-5093(01)01840-8
22.
MatsudaH, BhadeshiaHKDH.Kinetics of the bainite transformation. Proc R Soc Lond A. 2004;460(2046):1707–1722. doi: 10.1098/rspa.2003.1225
23.
BhadeshiaHKDH.Thermodynamic analysis of isothermal transformation diagrams. Metal Sci. 1982;16(3):159–166. doi: 10.1179/030634582790427217
24.
WangW, LeePD, McLeanM.A model of solidification microstructures in nickel-based superalloys: predicting primary dendrite spacing selection. Acta Mater. 2003;51(10):2971–2987. doi: 10.1016/S1359-6454(03)00110-1
25.
MujahidSA, BhadeshiaHKDH.Partitioning of carbon from supersaturated ferrite plates. Acta Metall Mater. 1992;40(2):389–396. doi: 10.1016/0956-7151(92)90313-4
26.
ŁawrynowiczZ, DymskiS.Analysis of carbon diffusion during bainite transformation in ADI. Arch Foundry Eng. 2007;7(3):87–92.
27.
ReesGI, BhadeshiaHKDH.Bainite transformation kinetics part 2 non-uniform distribution of carbon. Mater Sci Technol. 1992;8(11):994–1003. doi: 10.1179/mst.1992.8.11.994
28.
ÅgrenJ.A revised expression for the diffusivity of carbon in binary Fe-C austenite. Scr Mater. 1986;20(11):1507–1510.
29.
KhanSA, BhadeshiaHKDH.Kinetics of martensite transformation in partially bainitic 300M Steel. Mater Sci Eng A. 1990;129(2):257–272. doi: 10.1016/0921-5093(90)90273-6
TemizerI.Micromechanics: Analysis of heterogeneous materials. Turkey: Department of Mechanical Engineering, Bilkent University. Available from: https://sourceforge.net/projects/multiscale.2012.
32.
DarwishN, ElliottR.Austempering of low manganese ductile irons. Mater Sci Technol. 1993;9(7):572–585. doi: 10.1179/mst.1993.9.7.572
33.
LiuJ, ElliottR.The influence of cast structure on the austempering of ductile iron. Part 3: the role of nodule count on the kinetics, microstructure and mechanical properties of austempered Mn alloyed ductile iron. Int J Cast Met Res. 1999;12(3):189–195. doi: 10.1080/13640461.1999.11819356
