In this study, W-SiC/Cu composites were prepared by tape casting and vacuum hot-pressing sintering. The microstructures and properties of the composites were studied by means of X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, Vickers hardness test, bending strength test and coefficient of thermal expansion (CTE) test. The results showed that W2C, WC and WSi2 formed in the composites. The effects of SiC particle size on the relative densities, Vickers hardness, bending strength and CTE of composites were investigated. Vickers hardness, bending strength and CTE of the composite with SiC particle size of 6 µm reached the optimal values, which were 445.2 HV, 726.1 MPa, 9.24 ppm K−1.
ChenG, YangW, DongR, Interfacial microstructure and its effect on thermal conductivity of SiCp/Cu composites. Mater Design. 2014;63:109–114. doi: 10.1016/j.matdes.2014.05.068
2.
ZhangR, GaoL, GuoJ.Preparation and characterization of coated nanoscale Cu/SiC composite particles. Ceram Int. 2004;30(3):401–404. doi: 10.1016/S0272-8842(03)00123-8
3.
KangK, ZhangL, LuoG, Microstructural evolution and mechanical behavior of W-Si-C multi-phase composite prepared by arc-melting. Mater Sci Eng A. 2018;712:28–36. doi: 10.1016/j.msea.2017.11.028
4.
EfeGC, AltinsoyI, YenerT, Characterization of cemented Cu matrix composites reinforced with SiC. Vacuum. 2010;85(5):643–647. doi: 10.1016/j.vacuum.2010.09.009
5.
NiuY, LuD, HuangL, Comparison of W-Cu composite coatings fabricated by atmospheric and vacuum plasma spray processes. Vacuum. 2015;117:98–103. doi: 10.1016/j.vacuum.2015.04.015
6.
XuL, YanM, XiaY, Influence of copper content on the property of Cu-W alloy prepared by microwave vacuum infiltration sintering. J Alloy Compd. 2014;592(12):202–206. doi: 10.1016/j.jallcom.2013.12.202
7.
MengY, ShenY, ChenC, Microstructures and formation mechanism of W-Cu composite coatings on copper substrate prepared by mechanical alloying method. Appl Surf Sci. 2013;282(5):757–764. doi: 10.1016/j.apsusc.2013.06.049
8.
ChenP, LuoG, ShenQ, Thermal and electrical properties of W-Cu composite produced by activated sintering. Mater Design. 2013;46(4):101–105. doi: 10.1016/j.matdes.2012.09.034
9.
HwangNM, ParkYJ, KimDY, Activated sintering of nickel-doped tungsten: approach by grain boundary structural transition. Scripta Mater. 2000;42(5):421–425. doi: 10.1016/S1359-6462(99)00344-9
10.
JohnsonJL, GermanRM.Chemically activated liquid phase sintering of tungsten-copper. Int J Powder Metall. 1994;30(1):91–102.
11.
GuillemetT, GeffroyP, HeintzJ, An innovative process to fabricate copper/diamond composite films for thermal management applications. Compos Part A Appl S. 2012;43(10):1746–1753. doi: 10.1016/j.compositesa.2012.04.015
12.
GeffroyPM, ChartierT, SilvainJF.Preparation by tape casting and hot pressing of copper carbon composites films. J Eur Ceram Soc. 2007;27(1):291–299. doi: 10.1016/j.jeurceramsoc.2006.04.054
13.
HostašaJ, PiancastelliA, TociG, Transparent layered YAG ceramics with structured Yb doping produced via tape casting. Opt Mater. 2017;65:21–27. doi: 10.1016/j.optmat.2016.09.057
14.
YangWS, BiaminoS, PadovanoE, Thermophysical properties of SiC multilayer prepared by tape casting and pressureless sintering. Compos Struct. 2013;96(4):469–475. doi: 10.1016/j.compstruct.2012.09.018
15.
HeR, ZhangX, HanW, Effects of solids loading on microstructure and mechanical properties of HfB2-20 vol.-% MoSi2 ultra high temperature ceramic composites through aqueous gelcasting route. Mater Design. 2013;47(9):35–40. doi: 10.1016/j.matdes.2012.12.045
16.
HeR, HuP, ZhangX, Gelcasting of complex-shaped ZrB2-SiC ultra high temperature ceramic components. Mater Sci Eng A. 2012;556(9):494–499. doi: 10.1016/j.msea.2012.07.018
17.
NiZ, ZhaoH, MiP, Effect of sintering time on the bending strength and CTE of SiC/Al-35Si composite. Vacuum. 2016;124:28–31. doi: 10.1016/j.vacuum.2015.11.013
18.
WangZ, SongM, SunC, Effects of particle size and distribution on the mechanical properties of SiC reinforced Al–Cu alloy composites. Mater Sci Eng A. 2011;528(3):1131–1137. doi: 10.1016/j.msea.2010.11.028
19.
SunC, SongM, WangZ, Effect of particle size on the microstructures and mechanical properties of SiC-reinforced pure aluminum composites. J Mater Eng Perform. 2011;20(9):1606–1612. doi: 10.1007/s11665-010-9801-3
20.
ShuK, TuGC.The microstructure and the thermal expansion characteristics of Cu/SiCp composites. Mater Sci Eng A. 2003;349(1):236–247. doi: 10.1016/S0921-5093(02)00788-8
21.
ParkSW, KimJC, KimBK, Synthesis of silicon carbide nanocrystals using waste poly(vinyl butyral) sheet. J Am Ceram Soc. 2016;99(6):1885–1888. doi: 10.1111/jace.14263
22.
AbyzovAM, KidalovSV, ShakhovFM.High thermal conductivity composites consisting of diamond filler with tungsten coating and copper (silver) matrix. J Mater Sci. 2011;46(5):1424–1438. doi: 10.1007/s10853-010-4938-x
23.
SengWF, BarnesPA.Calculations of tungsten silicide and carbide formation on SiC using the Gibbs free energy. Mater Sci Eng B. 2000;72(1):13–18. doi: 10.1016/S0921-5107(99)00586-3
24.
HSC Chemistry for Windows, version 5.0. Outokumpu Research, Oy, Pori, Finland, 2006.
25.
LinLW, HeYH.Synthesis and optical property of ultra-long alpha-Si3N4 nanowires under superatmospheric pressure conditions. Crystengcomm. 2012;14(9):3250–3256. doi: 10.1039/c2ce06338g
26.
ChongFL, ChenJL, LiJG.Evaluation of tungsten coatings on CuCrZr and W/Cu FGM under high heat flux and HT-7 limiter plasma irradiation. J Nucl Mater. 2007;363–365:1201–1205. doi: 10.1016/j.jnucmat.2007.01.194
27.
FleischTH, MainsGJ.An XPS study of the UV reduction and photochromism of MoO3 and WO3. J Chem Phys. 1982;76(2):780–786. doi: 10.1063/1.443047
28.
WeigertEC, EspositoDV, ChenJG.Cyclic voltammetry and X-ray photoelectron spectroscopy studies of electrochemical stability of clean and Pt-modified tungsten and molybdenum carbide (WC and Mo2C) electrocatalysts. J Power Sources. 2009;193(2):501–506. doi: 10.1016/j.jpowsour.2009.04.020
29.
ZellnerMB, ChenJG.Surface science and electrochemical studies of WC and W2C PVD films as potential electrocatalysts. Catal Today. 2005;99(3–4):299–307. doi: 10.1016/j.cattod.2004.10.004
30.
LouroC, CavaleiroA, MontemorF.How is the chemical bonding of W-Si-N sputtered coatings?Surf Coat Tech. 2001;142–144(3):964–970. doi: 10.1016/S0257-8972(01)01215-4
31.
UsmanM, SuvanamSS, YazdiMG, Stoichiometry of the ALD-Al2O3/4H-SiC interface by synchrotron-based XPS. J Phys D Appl Phys. 2016;49(25):255308. doi: 10.1088/0022-3727/49/25/255308
32.
YuX, LiJ, ShiT, A green approach of synthesizing of Cu–Ag core–shell nanoparticles and their sintering behavior for printed electronics. J Alloy Compd. 2017;724:365–372. doi: 10.1016/j.jallcom.2017.07.045
33.
AbyzovAM, KruszewskiMJ, CiupińskiŁ, Diamond-tungsten based coating-copper composites with high thermal conductivity produced by Pulse Plasma Sintering. Mater Design. 2015;76:97–109. doi: 10.1016/j.matdes.2015.03.056
34.
PatowariPK, SahaP, MishraPK.Taguchi analysis of surface modification technique using W-Cu powder metallurgy sintered tools in EDM and characterization of the deposited layer. Int J Adv Manuf Tech. 2011;54(5–8):593–604. doi: 10.1007/s00170-010-2966-y
35.
ZhaiC, NiuY, HuangL, Microstructure characteristics and oxidation behavior of vacuum plasma sprayed tungsten disilicide coating. Ceram Int. 2016;42(16):18798–18805. doi: 10.1016/j.ceramint.2016.09.024
36.
El-KadyO, FathyA.Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites. Mater Design. 2014;54:348–353. doi: 10.1016/j.matdes.2013.08.049
37.
JamaatiR, AmirkhanlouS, ToroghinejadMR, Effect of particle size on microstructure and mechanical properties of composites produced by ARB process. Mater Sci Eng A. 2011;528(4):2143–2148. doi: 10.1016/j.msea.2010.11.056
38.
DengKK, WuK, WuYW, Effect of submicron size SiC particulates on microstructure and mechanical properties of AZ91 magnesium matrix composites. J Alloy Compd. 2010;504(2):542–547. doi: 10.1016/j.jallcom.2010.05.159
39.
IbrahimA, AbdallahM, MostafaSF, An experimental investigation on the W-Cu composites. Mater Design. 2009;30(4):1398–1403. doi: 10.1016/j.matdes.2008.06.068
