The creep properties of Ni-based bicrystal specimens with low- to medium-angle grain boundaries are investigated at 1100°C and 130 MPa with two misorientation angles prepared by double-seed solidification. Experimental results show that the angle of the grain boundary with respect to the stretching direction has a strong effect on creep life. Molecular dynamics simulations show that the effect of the grain boundary on the neighbouring dislocation density is related to the grain boundary angle. A creep constitutive model with the grain boundary angle and the initial damage rate can be adopted to describe the creep damage evolution. The model is then modified according to the molecular dynamics simulation and experimental results to give more accurate predictions of creep life.
MaclachlanDW, WrightLW, GunturiS, Constitutive modelling of anisotropic creep deformation in single crystal blade alloys SRR99 and CMSX-4. Int J Plasticity. 2001;17(4):441–467. doi: 10.1016/S0749-6419(00)00058-9
2.
ReedRC.The superalloys: fundamentals and applications. Cambridge: Cambridge University Press; 2006.
3.
WenZ, PeiH, WangB, The tension/compression asymmetry of a high γ′ volume fraction nickel-based single-crystal superalloy. Mater High Temp. 2016;33:68–74. doi: 10.1080/09603409.2015.1106786
4.
WangG, LiuJ, LiuJ, High temperature stress rupture anisotropy of a Ni-based single crystal superalloy. J Mater Sci Technol. 2016;32(10):1003–1007. doi: 10.1016/j.jmst.2016.08.018
5.
WenZX, ZhangDX, LiSW, Anisotropic creep damage and fracture mechanism of nickel-base single crystal superalloy under multiaxial stress. J Alloy Compd. 2017;692:301–312. doi: 10.1016/j.jallcom.2016.09.052
6.
MackayRA, MaierRD.The influence of orientation on the stress rupture properties of nickel-base superalloy single crystals. Metall Mater Trans A. 1982;13(N10):1747–1754. doi: 10.1007/BF02647830
7.
DragnevskiK, MullisAM, WalkerDJ, Mechanical deformation of dendrites by fluid flow during the solidification of undercooled melts. Acta Mater. 2002;50(14):3743–3755. doi: 10.1016/S1359-6454(02)00186-6
8.
NewellM, DevendraK, JenningsPA, Role of dendrite branching and growth kinetics in the formation of low angle boundaries in Ni–base superalloys. Mater Sci Eng A. 2005;412:307–315. doi: 10.1016/j.msea.2005.09.030
9.
NapolitanoR, SchaeferR.The convergence-fault mechanism for low-angle boundary formation in single-crystal castings. J Mater Sci. 2000;35(7):1641–1659. doi: 10.1023/A:1004747612160
10.
ChenQZ, JonesCN, KnowlesDM.The grain boundary microstructures of the base and modified RR 2072 bicrystal superalloys and their effects on the creep properties. Mater Sci Eng A. 2004;385(1):402–418. doi: 10.1016/S0921-5093(04)00905-0
11.
HuangM, ZhuoLC, LiuZL, Misorientation related microstructure at the grain boundary in a nickel-based single crystal superalloy. Mater Sci Eng A. 2015;640:394–401. doi: 10.1016/j.msea.2015.05.089
12.
LimYS, KimJS, KimHP, The effect of grain boundary misorientation on the intergranular M23C6 carbide precipitation in thermally treated alloy 690. J Nucl Mater. 2004;335(1):108–114. doi: 10.1016/j.jnucmat.2004.07.038
13.
DahlbergCFO, SaitoY, ÖztopMS, Geometrically necessary dislocation density measurements at a grain boundary due to wedge indentation into an aluminum bicrystal. J Mech Phys Solids. 2017;105:131–149. doi: 10.1016/j.jmps.2017.05.005
14.
LiangH, DunneFPE, GND accumulation in bi-crystal deformation: Crystal plasticity analysis and comparison with experiments. INT J MECH SCI. 2009;51:326–333. doi: 10.1016/j.ijmecsci.2009.03.005
15.
ZhaoYS, ZhangJ, LuoYS, Effect of Hf and B on Transverse and Longitudinal Creep of a Re-Containing Nickel-Base Bicrystal Superalloy: Proceedings of the 13th Intenational Symposium of Superalloys.Superalloys 2016.
16.
ZhaoYS, ZhangJ, LuoYS, Effects of Hf and B on high temperature low stress creep behavior of a second generation Ni-based single crystal superalloy DD11. Mater Sci Eng A. 2016;672:143–152. doi: 10.1016/j.msea.2016.06.079
17.
LuoYS, ZhaoYS, YangS, Effect of Ru on partitioning of elements in γ/γ′ phase and high temperature creep properties of a high Re single crystal superalloy. Rare Metal Mat Eng. 2016;45(7):1719–1724.
18.
LiuXM, YouXC, LiuZL, Molecular dynamical investigation on plastic behavior of Cu(100)twist-grain boundary under uniaxial tension. Acta Phys Sin. 2009;58(3):1849–1856.
19.
RahmanMJ, ZurobHS, HoytJJ.A comprehensive molecular dynamics study of low-angle grain boundary mobility in a pure aluminum system. Acta Mater. 2014;74:39–48. doi: 10.1016/j.actamat.2014.03.063
20.
HillR.Generalized constitutive relations for incremental deformation of metal crystals by multislip. J Mech Phys Solids. 1966;14(2):95–102. doi: 10.1016/0022-5096(66)90040-8
21.
ZhaoJQ, LiJR, LiuSZ, Effect of low angle grain boundaries on tensile properties of single crystal superalloy DD6 at 980°C. Rare Metal Mat Eng. 2016;36(12):2232–2235.
22.
HillR, RiceJR.Constitutive analysis of elastic-plastic crystals at arbitrary strain. J Mech Phys Solids. 1972;20(6):401–413. doi: 10.1016/0022-5096(72)90017-8
23.
KachanovLM.Introduction to continuum damage mechanics. Boston: Martinus Nijhoff Press; 1986.
24.
RabotnovYN.Creep problems in structural members. Amsterdam: North-Holland;1969.
25.
YehNM, KremplE.Advances in multiaxial fatigue. West Conshohocken: ASTM International; 1993.
StukowskiA.Visualization and analysis of atomistic simulation data with OVITO – the open visualization tool. Model Simul Mater Sci Eng. 2010;18(1):15–12. doi: 10.1088/0965-0393/18/1/015012
28.
MishinY.Atomistic modeling of the γ and phases γ′ of the Ni–Al system. Acta Mater. 2004;52(6):1451–1467. doi: 10.1016/j.actamat.2003.11.026
29.
PouriayevaliH, XuBX.Decomposition of dislocation densities at grain boundary in a finite-deformation gradient crystal-plasticity framework. Int J Plast. 2017;96:36–55. doi: 10.1016/j.ijplas.2017.04.010
