Optical microscopy, scanning electron microscopy, X-ray diffraction and tensile testing were performed to investigate the microstructure and mechanical properties of as-cast Mg–4Y/Nd–2Zn alloys. The results show that the secondary dendritic arm spacing for the Mg–4Y–2Zn alloy is smaller than that for the Mg–4Nd–2Zn alloy, and that X-Mg12YZn or W-Mg3Zn3Nd2 form in Mg–4Y/Nd–2Zn alloys. The lamellar X phase distributes at the grain boundary, pointing into the grains, whereas the rod-like W phase preferentially segregates at the triangle junction of the grain boundary. The greater grain boundary strengthening effect and the smaller fragmentation effect of the brittle eutectic phases leads to the as-cast Mg–4Y–2Zn alloy having better comprehensive mechanical properties. The fracture mechanism for as-cast Mg–4Y/Nd–2Zn alloys is quasi-cleavage fracture.
ChenXH, GengYX, PanFS.Research progress in magnesium alloys as functional materials. Rare Metal Mat Eng. 2016;45(9):2269–2274. doi: 10.1016/S1875-5372(17)30015-2
PanH, PanF, WangX, PengJ, High conductivity and high strength Mg–Zn–Cu alloy. Mater Sci Technol2014;30:759–764. doi: 10.1179/1743284713Y.0000000400
4.
HirschJ, Al-SammanT.Superior light metals by texture engineering: optimized aluminum and magnesium alloys for automotive applications. Acta Mater. 2013;61(3):818–843. doi: 10.1016/j.actamat.2012.10.044
5.
BettlesCJ, GibsonMA.Microstructural design for enhanced elevated temperature properties in sand-castable magnesium alloys. Adv Eng Mater. 2003;5(12):859–865. doi: 10.1002/adem.200310103
6.
YinH, LiuZL, LiuXQ, Effects of Al addition on the microstructure and mechanical properties of Mg–4Y alloys. Mater Sci Technol. 2017;33(18):2188–2196. doi: 10.1080/02670836.2017.1353664
7.
ArrabalR, MingoB, PardoA, Role of alloyed Nd in the microstructure and atmospheric corrosion of as-cast magnesium alloy AZ91. Corros Sci. 2015;97:38–48. doi: 10.1016/j.corsci.2015.04.004
8.
WuJ, ChiuYL, JonesIP.Effect of Gd on the microstructure of as-cast Mg-4.2Zn-0.8Y (at.%) alloys. J Alloy Compd. 2016;661:455–460. doi: 10.1016/j.jallcom.2015.11.209
9.
SuZJ, LiuCM, WangYC, Effect of Y content on microstructure and mechanical properties of Mg–2.4Nd–0.2Zn–0.4Zr alloys. Mater Sci Technol. 2013;29(2):148–155. doi: 10.1179/1743284712Y.0000000149
10.
ZhengKY, DongJ, ZengXQ, Precipitation and its effect on the mechanical properties of a cast Mg–Gd–Nd–Zr alloy. Mater Sci Eng. 2008;489(1):44–54. doi: 10.1016/j.msea.2007.11.080
11.
NieJF, MuddleBC.Characterisation of strengthening precipitate phases in a Mg–Y–Nd alloy. Acta Mater. 2000;48(8):1691–1703. doi: 10.1016/S1359-6454(00)00013-6
12.
SolomonELS, ChanT, ChenA, Aging behavior of Mg alloys containing Nd and Y. In: SolankiK, OrlovD, SinghA, editors. Magnesium Technology. Germany: Springer; 2017. p. 349–352. https://doi.org/10.1007/978-3-319-52392-7_50.
13.
NieJF, WilsonNC, ZhuYM, Solute clusters and GP zones in binary Mg–RE alloys. Acta Mater. 2016;106:260–271. doi: 10.1016/j.actamat.2015.12.047
14.
IssaA, SaalJE, WolvertonC.Formation of high-strength β′ precipitates in Mg–RE alloys: The role of the Mg/β′′ interfacial instability. Acta Mater. 2015;83:75–83. doi: 10.1016/j.actamat.2014.09.024
15.
JiDW, LiuCM, ChenZY, Effects of Zn content on microstructures and mechanical properties of as cast Mg–Zn–Y–Zr alloys. Mater Sci Technol. 2013;29(4):480–486. doi: 10.1179/1743284712Y.0000000165
16.
TangY, LiB, TangH, Effect of long period stacking ordered structure on mechanical and damping properties of as-cast Mg–Zn–Y–Zr alloy. Mater Sci Eng. 2015;640:287–294. doi: 10.1016/j.msea.2015.06.004
17.
ZhangZ, LiuX, HuW, Microstructures, mechanical properties and corrosion behaviors of Mg–Y–Zn–Zr alloys with specific Y/Zn mole ratios. J Alloy Compd. 2015;624:116–125. doi: 10.1016/j.jallcom.2014.10.177
18.
YeZ, TengX, LouG, Microstructure and mechanical properties of Mg-Zn-Y alloy containing LPSO phase and I-phase. Mater Res Express. 2017;4(8):086502. doi: 10.1088/2053-1591/aa7f8f
19.
LiuZ, ZhangSB, MaoPL, Effects of Y on hot tearing formation mechanism of Mg–Zn–Y–Zr alloys. Mater Sci Technol. 2014;30(10):1214–1222. doi: 10.1179/1743284713Y.0000000437
20.
YangM-b, WuD-y, HouM-d, As-cast microstructures and mechanical properties of Mg–4Zn–xY–1Ca (x= 1.0, 1.5, 2.0, 3.0) magnesium alloys. Trans Nonferr Metal Soc. 2015;25(3):721–731. doi: 10.1016/S1003-6326(15)63657-3
21.
ChenB, LinD, ZengX, Effects of yttrium and zinc addition on the microstructure and mechanical properties of Mg–Y–Zn alloys. J Mater Sci. 2010;45(9):2510–2517. doi: 10.1007/s10853-010-4223-z
22.
ItoiT, InazawaT, YamasakiM, Microstructure and mechanical properties of Mg-Zn-Y alloy sheet prepared by hot-rolling. Mater Sci Eng. 2013;560:216–223. doi: 10.1016/j.msea.2012.09.059
23.
YamasakiM, HashimotoK, HagiharaK, Effect of multimodal microstructure evolution on mechanical properties of Mg–Zn–Y extruded alloy. Acta Mater. 2011;59(9):3646–3658. doi: 10.1016/j.actamat.2011.02.038
24.
WeiLY, DunlopGL, WestengenH.The intergranular microstructure of cast Mg-Zn and Mg-Zn-rare earth alloys. Metall Mater Trans. 1995;26(8):1947–1955. doi: 10.1007/BF02670666
25.
LiQ, WangQ, WangY, Effect of Nd and Y addition on microstructure and mechanical properties of as-cast Mg–Zn–Zr alloy. J Alloy Compd. 2007;427(1):115–123. doi: 10.1016/j.jallcom.2006.02.054
26.
LiangM-j, LiaoH-h, DingW-j, Microstructure characterization on Mg-2Nd-4Zn-1Zr alloy during heat treatment. Trans Nonferr Metal Soc. 2012;22(10):2327–2333. doi: 10.1016/S1003-6326(11)61467-2
27.
NieJ-F.Precipitation and hardening in magnesium alloys. Metall Mater Trans. 2012;43(11):3891–3939. doi: 10.1007/s11661-012-1217-2
28.
KimJ-K, KoW-S, SandlöbesS, The role of metastable LPSO building block clusters in phase transformations of an Mg-Y-Zn alloy. Acta Mater. 2016;112:171–183. doi: 10.1016/j.actamat.2016.04.016
29.
ShaoXH, YangZQ, MaXL.Strengthening and toughening mechanisms in Mg–Zn–Y alloy with a long period stacking ordered structure. Acta Mater. 2010;58(14):4760–4771. doi: 10.1016/j.actamat.2010.05.012
30.
ChenTJ, ZhangDH, WangW, Effects of Zn content on microstructures and mechanical properties of Mg–Zn–RE–Sn–Zr–Ca alloys. Mater Sci Eng. 2014;607:17–27. doi: 10.1016/j.msea.2014.03.111
31.
ChenTJ, WangW, ZhangDH, Development of a new magnesium alloy ZW21. Mater Des. 2013;44:555–565. doi: 10.1016/j.matdes.2012.08.040
32.
WangZJ, ZhangCB, CuiJZ, Effect of Er and Nd addition on microstructure and mechanical properties of as-cast ZK60 alloy. J Chin Rare Earth Soc. 2006;24(6):710–715. (in Chinese).
33.
ZhangY, ZengX, LiuL, Effects of yttrium on microstructure and mechanical properties of hot-extruded Mg–Zn–Y–Zr alloys. Mater Sci Eng. 2004;373(1):320–327. doi: 10.1016/j.msea.2004.02.007
34.
ZhangY, YuS, ZhuX, Study on as-cast microstructures and solidification process of Mg–Zn–Y alloys. J Non Cryst Solids. 2008;354(14):1564–1568. doi: 10.1016/j.jnoncrysol.2007.08.049
35.
TangP-Y, TangB-Y, PengL-M, Effect of Y and Zn substitution on elastic properties of 6H-type ABCBCB LPSO structure in Mg97Zn1Y2 alloy. Mater Chem Phys. 2012;131(3):634–641. doi: 10.1016/j.matchemphys.2011.10.028
36.
AmiyaK, OhsunaT, InoueA.Long-period hexagonal structures in melt-spun Mg97Ln2Zn1 (Ln=lanthanide metal) alloys. Mater Trans. 2003;44(10):2151–2156. doi: 10.2320/matertrans.44.2151
37.
HuHQ.Principle of metal solidification. Beijing: China Machine Press; 2007. (in Chinese).
38.
CorderoZC, KnightBE, SchuhCA.Six decades of the Hall–Petch effect–a survey of grain-size strengthening studies on pure metals. Int Mater Rev. 2016;61(8):495–512. doi: 10.1080/09506608.2016.1191808
