This study reports the effect of process temperature on microstructure evolution of electron beam melted Inconel 718. Samples fabricated at 915°C had fine grain boundary δ (∼200 nm) along with coarse intragranular δ spanning through the length of the grains. On the other hand, samples fabricated at 990°C, only had grain boundary δ along with secondary carbides. During hot isostatic pressing, the distribution of carbides governs the grain growth vs. lack of it. The samples fabricated at 990°C having grain boundary carbides had no grain growth owing to the pinning effect of carbides. In contrast, the sample processed at 915°C had significant grain growth owing to dissolution of grain boundary δ phase and absence of grain boundary carbides.
WagnerHJ, HallAM.Physical metallurgy of alloy 718; 1965.
2.
LingenfelterA.Welding of inconel alloy 718: a historical overview. In superalloys 718 metallurgy and applications; 1989. p. 673–683. (TMS, 1989).
3.
LiS, ZhuangJ, YangJ.The effect of delta-phase on crack propagation under creep and fatigue conditions in alloy 718. In Superalloys 718, 625, 706 and various derivatives; 1994. p. 545–555. (TMS, 1994).
4.
BurkeMG, MillerMK.Precipitation in alloy 718: a combined AEM and APFIM investigation. In Superalloys 718, 625 and various derivatives; 1991. p. 337–350. (TMS, 1991).
5.
RaoGA, KumarM, SrinivasM, Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 718. Mater Sci Eng A. 2003;355:114–125. doi: 10.1016/S0921-5093(03)00079-0
6.
KoulAK, AuP, BellingerN.Development of a damage tolerant microstructure for Inconel 718 turbine disk material. In Superalloys 1988 (sixth international symposium); 1988. p. 3–12. (TMS, 1988).
7.
RadavichJF.The physical metallurgy of cast and wrought alloy 718. In Superalloys 718 metallurgy and applications; 1989. p. 229–240. (TMS, 2004).
8.
DesvalleesY, BouzidiM, BoisF, Delta phase in INCONEL 718: mechanical properties and forging process requirements. In Superalloys 718, 625, 706 and various derivatives; 1994. p. 281–291. (TMS, 1994).
9.
GibsonI., RosenD.W., StuckerB.Additive manufacturing technologies. New York: Springer; 2010.
10.
ChlebusE, GruberK, KuźnickaB, Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting. Mater Sci Eng A. 2015;639:647–655. doi: 10.1016/j.msea.2015.05.035
11.
StrondlA, FischerR, FrommeyerG, Investigations of MX and γ′/γ″ precipitates in the nickel-based superalloy 718 produced by electron beam melting. Mater Sci Eng A. 2008;480:138–147. doi: 10.1016/j.msea.2007.07.012
12.
KirkaMM, UnocicKA, RaghavanN, Microstructure development in electron beam-melted Inconel 718 and associated tensile properties. JOM. 2016;68:1012–1020. doi: 10.1007/s11837-016-1812-6
13.
SamesWJ, ListFA, PannalaS, The metallurgy and processing science of metal additive manufacturing. Int Mater Rev. 2016;6608:1–46.
14.
WangF, WuXH, ClarkD.On direct laser deposited Hastelloy X: dimension, surface finish, microstructure and mechanical properties. Mater Sci Technol. 2011;27:344–356. doi: 10.1179/026708309X12578491814591
15.
ZhaoX, LinX, ChenJ, The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming. Mater Sci Eng A. 2009;504:129–134. doi: 10.1016/j.msea.2008.12.024
16.
ReedRC, CoxDC, RaeCMF.Damage accumulation during creep deformation of a single crystal superalloy at 1150°C. Mater Sci Eng A. 2007;448:88–96. doi: 10.1016/j.msea.2006.11.101
DiemMM.Development of a combined hot isostatic pressing and solution heat-treat process for the cost effective densification of critical aluminum castings; 2002.
19.
BlackwellPL.The mechanical and microstructural characteristics of laser-deposited IN718. J Mater Process Technol. 2005;170:240. doi: 10.1016/j.jmatprotec.2005.05.005
20.
SamesWJ, UnocicKA, DehoffRR, Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting. J Mater Res2014;29:1920–1930. doi: 10.1557/jmr.2014.140
21.
FormentiA, EliassonA, MitchellA, Solidification sequence and carbide precipitation in Ni-base superalloys IN718, IN625 AND IN939. High Temp Mater Process. 2005;24:239–258.
22.
KnorovskyGA, CieslakMJ, HeadleyTJ, INCONEL 718: a solidification diagram. Metall Trans A. 1989;20:2149–2158. doi: 10.1007/BF02650300
23.
SundararamanM, MukhopadhyayP, BanerjeeS.Carbide precipitation in Nickel Base superalloys 718 and 625 and their effect on mechanical properties. In Superalloys 718, 625, 706 and various derivatives; 1997. p. 367–378. (TMS, 1997).
24.
SundararamanM, MukhopadhyayP, BanerjeeS.Some aspects of the precipitation of metastable intermetallic phases in INCONEL 718. Metall Trans A. 1992;23:2015–2028. doi: 10.1007/BF02647549
25.
SundararamanM, MukhopadhyayP, BanerjeeS.Precipitation of the δ-Ni3Nb phase in two nickel base superalloys. Metall Trans A. 1988;19:453–465. doi: 10.1007/BF02649259
26.
SundararamanM, BanerjeeS, MoriH.The stability of γ″ and γ′ phases in alloy 718 under electron irradiation. In Superalloys 718, 625, 706 and various derivatives; 2001:19. p. 379–387. (TMS, 2001).
27.
SundararamanM, MukhopadhyayP, BanerjeeS.Precipitation and room temperature deformation behaviour of Inconel 718. In Superalloys 718, 625, 706 and various derivatives; 1994. p. 419–440. (TMS, 1994).
28.
BrooksJW, BridgesPJ.Metallurgical stability of Inconel alloy 718. In Superalloys 1988 (sixth international symposium); 1988. p. 33–42. (TMS, 1988).
29.
CarlsonRG, RadavichJF.Microstructural characterization of cast 718. In Superalloys 718 metallurgy and applications; 1989. p. 79–95. (TMS, 1989).
30.
AzadianS, WeiL-Y, WarrenR.Delta phase precipitation in Inconel 718. Mater Charact. 2004;53:7–16. doi: 10.1016/j.matchar.2004.07.004
31.
SundararamanM, MukhopadhyayP.Carbide precipitation in Inconel 718. High Temp Mater Process. 1993;11:611. doi: 10.1515/HTMP.1993.11.1-4.351
32.
CaiD, ZhangW, NieP, Dissolution kinetics of δ phase and its influence on the notch sensitivity of Inconel 718. Mater Charact. 2007;58:220–225. doi: 10.1016/j.matchar.2006.04.020
33.
CaoWD, KennedyRL, WillisMP.Differential thermal analysis (DTA) study of the homogenization process in alloy 718. Superalloys 718, 625 Var Deriv. 1991;TMS 1991:147–160. doi: 10.7449/1991/Superalloys_1991_147_160
