The pinning effect of adding the microalloying element Mg on the growth of austenite grain for low-carbon steel was investigated in this study. The grain growth pinning behaviour of austenite was observed in situ at high temperature using a high-temperature confocal scanning laser microscope at 1573 K for 300 s. The average austenite grain size was calculated using optical micrograph Leica software. In situ observation showed that the finely dispersed Mg inclusions can inhibit the boundary migration of austenite grains. MgO–MnS is the most effective inclusions for pinning of austenite grain boundaries in Mg-containing SS400, and the ratios of inclusion on austenite grain boundaries to the total inclusion are 43%. In addition, the increase in Mg addition reduces the grain mobility.
KojimaA, KiyoseA, UemoriR.Super high HAZ toughness technology with fine microstructure imparted by fine particles. Nippon Steel Technical Report. 2004;90:2–6.
2.
ChenZ, LerettoMH, CochranceRC.Nature of large precipitates in titanium-containing HSLA steels. Mater Sci Tech. 1987;3:836–844. doi: 10.1179/mst.1987.3.10.836
3.
YanW, ShanY, YangK.Effect of TiN inclusions on the impact toughness of low-carbon microalloyed steels. Metal Mater Trans A. 2006;37:2147–2158. doi: 10.1007/BF02586135
4.
PrikrylM, KroupaA, WeatherlyGC, Precipitation behavior in a medium carbon Ti-VN microalloyed steel. Metal Mater Trans A. 1996;27:1149–1165. doi: 10.1007/BF02649854
5.
KojimaA, KiyoseA, UemoriR.Development of high HAZ toughness steel plates for box columns with high heat input welding. Nippon Steel Technical Report. 2004;90:39–44.
6.
GreggJ, BhadeshiaH.Solid-state nucleation of acicular ferrite on minerals added to molten steel. Acta Mater. 1997;45:739–748. doi: 10.1016/S1359-6454(96)00187-5
7.
ShimJ-H, ChoYW, ChungSH, Nucleation of intragranular ferrite at Ti2O3 particle in low carbon steel. Acta Mater. 1999;47:2751–2760. doi: 10.1016/S1359-6454(99)00114-7
8.
ShimJ, ChoY, ChungS, ShimJ, LeeD.Intragranular ferrite nucleation and grain refinement of Ti-containing low carbon steels. Kor J Inst Met Mater. 1998;36:1993–2002.
9.
LeeJ, PanY.The formation of intragranular acicular ferrite in simulated heat-affected zone. ISIJ Int. 1995;35:1027–1033. doi: 10.2355/isijinternational.35.1027
10.
ZhangZ, FarrarR.Role of non-metallic inclusions in formation of acicular ferrite in low alloy weld metals. Mater Sci. Technol. 1996;12:237–260. doi: 10.1179/mst.1996.12.3.237
11.
ShaQ, SunZ.Grain growth behavior of coarse-grained austenite in a Nb–V–Ti microalloyed steel. Mater Sci Eng A. 2009;523:77–84. doi: 10.1016/j.msea.2009.05.037
12.
SuitoH.OHTA H, MoriokaS.Refinement of solidification microstructure and austenite grain by fine inclusion particles. ISIJ int. 2006;46:840–846. doi: 10.2355/isijinternational.46.840
13.
ChapaM, MedinaSF, LópezV, Influence of Al and Nb on optimum Ti/N ratio in controlling austenite grain growth at reheating temperatures. ISIJ Int. 2002;42:1288–1296. doi: 10.2355/isijinternational.42.1288
14.
MoonJ, LeeJ, LeeC.Prediction for the austenite grain size in the presence of growing particles in the weld HAZ of Ti-microalloyed steel. Mater Sci Eng A. 2007;459:40–46. doi: 10.1016/j.msea.2006.12.073
15.
WangX, WuK, HuangG, In situ observation of austenite grain growth behavior in the simulated coarse-grained heat-affected zone of Ti-microalloyed steels. Int J Min Met Mater. 2014;21:878–885. doi: 10.1007/s12613-014-0984-8
16.
DuS, LiY, YiZheng. Kinetics of austenite grain growth during heating and its influence on hot deformation of LZ50 steel. J Mater Eng Perform. 2016;25:2661–2669. doi: 10.1007/s11665-016-2162-9
17.
RoyS, CharkabartiD, DeyGK.Austenite grain structures in Ti- and Nb-containing high-strength low-alloy steel during slab reheating. Metall Mater Trans A. 2013;44:717–728. doi: 10.1007/s11661-012-1409-9
18.
MaropoulosS, KaragiannisE, RidleyE.Factors affecting prior austenite grain size in low alloy steel. J Mater Sci. 2007;42:1309–1320. doi: 10.1007/s10853-006-1191-4
19.
WangL, ParkerS, RoseA, Effects of solute Nb atoms and Nb precipitates on isothermal transformation kinetics from austenite to ferrite. Metall Trans A. 2016;47:3387–3396. doi: 10.1007/s11661-016-3548-x
20.
OhnoM, YamaguchiT, MastsuuraK, Suppression of coarse columnar grain formation in as-cast austenite structure of a hyperperitectic carbon steel by Nb addition. ISIJ Int. 2011;51:1831–1837. doi: 10.2355/isijinternational.51.1831
21.
GarcíaC, CaballeroF, CapdevilaC, Revealing austenite grain boundaries by thermal etching: advantages and disadvantages. Mater Charact. 2002;49:121–127. doi: 10.1016/S1044-5803(03)00002-0
22.
WeygandD, BréchetY, LépinouxJ.Zener pinning and grain growth: a two-dimensional vertex computer simulation. Acta Mater. 1999;47:961–970. doi: 10.1016/S1359-6454(98)00383-8
23.
KadB, HazzledineP.Monte Carlo simulations of grain growth and Zener pinning. Mater Sci Eng A. 1997;238:70–77. doi: 10.1016/S0921-5093(97)00435-8
24.
GaoJ, ThompsonG, PattersonB.Computer simulation of grain growth with second phase particle pining. Acta Mater. 1997;45:3653–3658. doi: 10.1016/S1359-6454(97)00048-7
25.
MiodownikM, MartinJW, CerzoA.Mesoscale simulations of particle pinning. Philos Mag A. 1999;79:203–222. doi: 10.1080/01418619908214284
26.
MoelansN, BlanpainB, WollantsP.Pinning effect of second-phase particles on grain growth in polycrystalline films studied by 3-D phase filed simulations. Acta Mater. 2007;55:2173–2182. doi: 10.1016/j.actamat.2006.11.018
27.
MartinJ.Precipitation hardening: quantitative metallography. Woburn: A division of Reed Educational and Professional Publishing Ltd; 1998.
28.
FengC, YangC, HangS, Effect of magnesium on inclusion formation in Ti-killed steels and microstructural evolution in welding induced coarse-grained heat affected zone. J Iron Steel Res Int. 2009;16:69–74. doi: 10.1016/S1006-706X(09)60013-3
29.
KimH, ChangC, LeeH.Evolution of inclusions and resultant microstructural change with Mg addition in Mn/Si/Ti deoxidized steels. Scripta Mater. 2005;53:1253–1258. doi: 10.1016/j.scriptamat.2005.08.001
30.
KimuraS, NakajimaK, MizoguchiS.Behavior of alumina-magnesia complex inclusions and magnesia inclusions on the surface of molten low-carbon steels. Metall Mater Trans B. 2001;32:79–85. doi: 10.1007/s11663-001-0010-1
31.
HeY, WangF, LiC, Effect of Mg content on the hot ductility of wrought Fe-36Ni alloy with Ti addition. Mater Sci Eng A. 2016;673:99–107. doi: 10.1016/j.msea.2016.07.070
32.
BurkeJ, TurnbullD.Recrystallization and grain growth. Process Metal Physics. 1952;3:220–292. doi: 10.1016/0502-8205(52)90009-9
33.
VynokurB.Influence of alloying on the free energy of austenitic grain boundary in steel. Mater Sci. 1996;32:448–455. doi: 10.1007/BF02538970
