The rapid development of new energy automobiles leads to an increasing demand for high-strength lithium battery shell alloy. The microstructures, electrical conductivity and mechanical properties of CeLa-containing Al–Cu–Mn–Mg–Fe alloys were investigated with scanning electron microscopy (SEM), X-ray diffraction, Eddy Current conductivity tester, tensile testing and Erichsen cup testing. Experiment results indicate that Al6(Mn, Fe) particles could be refined by CeLa alloying and AlCuCeLa phase nucleates and grew up at the surface of Al6(Mn, Fe) particle. Major texture of the CeLa-containing alloys was different from that of the CeLa-free alloy. The electrical conductivity decreased with increase of the CeLa content. CeLa addition could greatly enhance the tensile strength of the alloy at temperatures ranging from –40°C to 300°C.
FujiiT, IshiiH, ZhaoPZ, Japanese Patent: JP2009046743-A. 2012.
4.
ZhangJC, DingDY, XuXL, Effect of Ce addition on the mechanical and electrochemical properties of a lithium battery shell alloy. J Alloys Compd.2014;617:665–669. doi: 10.1016/j.jallcom.2014.08.089
5.
ArugaY, MatsumotoK, InoueY, United States Patent: US2012227870-A1. 2012.
6.
YaoD, XiaY, QiuF, Effects of La addition on the elevated temperature properties of the casting Al–Cu alloy. Mater Sci Eng A. 2011;528:1463–1466. doi: 10.1016/j.msea.2010.10.046
7.
YaoD, ZhaoW, ZhaoH, High creep resistance behavior of the casting Al–Cu alloy modified by La. Scripta Mater.2009;61:1153–1155. doi: 10.1016/j.scriptamat.2009.09.007
8.
LathabaiS, LloydPG.The effect of scandium on the microstructure, mechanical properties and weldability of a cast Al–Mg alloy. Acta Mater. 2002;50:4275–4292. doi: 10.1016/S1359-6454(02)00259-8
9.
LiG, ZhaoNQ, LiuT, Effect of Sc/Zr ratio on the microstructure and mechanical properties of new type of Al–Zn–Mg–Sc–Zr alloys. Mater Sci Eng A. 2014;617:219–227. doi: 10.1016/j.msea.2014.08.041
10.
YaoJY, KimGH, MoonIG, Rare earth concentration in the primary Si crystal in rare earth added Al–21 wt.% Si alloy. Scripta Mater.1998;39:307–314. doi: 10.1016/S1359-6462(98)00168-7
11.
ChenY, PanY, LuT, Effects of combinative addition of lanthanum and boron on grain refinement of Al–Si casting alloys. Mater Des. 2014;64:423–426. doi: 10.1016/j.matdes.2014.07.068
12.
YaoD, BaiZ, QiuF, Effects of La on the age hardening behavior and precipitation kinetics in the cast Al–Cu alloy. J Alloys Compd. 2012;540:154–158. doi: 10.1016/j.jallcom.2012.06.089
13.
WangWT, ZhangXM, GaoZG, Influences of Ce addition on the microstructures and mechanical properties of 2519A aluminum alloy plate. J Alloys Compd. 2010;491:366–371. doi: 10.1016/j.jallcom.2009.10.185
14.
DuJD, DingDY, XuZ, Effect of CeLa addition on the microstructures and mechanical properties of Al–Cu–Mn–Mg–Fe alloy. Mater Charact. 2017;123:42–50. doi: 10.1016/j.matchar.2016.11.010
15.
KobayashiK, MatsumotoT, MicheuoH, Japanese Patent: JP2011068934-A. 2010.
16.
FundenbergerJ-J, BeausirB.Universit de Lorraine – Metz, 2015, JTEX – Software for Texture Analysis. Available from: http://jtex-software.eu/.
17.
Erichsen cupping test, ISO standard 20482:2013.
18.
RadmilovicV, TolleyA, MarquisEA, Monodisperse Al3(LiScZr) core/shell precipitates in Al alloys. Scripta Mater.2008;58:529–532. doi: 10.1016/j.scriptamat.2007.11.012
19.
Van DalenME, DunandDC, SeidmanDN.Microstructural evolution and creep properties of precipitation-strengthened Al–0.06Sc–0.02Gd and Al–0.06Sc–0.02Yb (at.%) alloys. Acta Mater. 2011;59:5224–5237. doi: 10.1016/j.actamat.2011.04.059
20.
ZhaoYL, YangZQ, ZhangZ, Double-peak age strengthening of cold-worked 2024 aluminum alloy. Acta Mater. 2013;61:1624–1638. doi: 10.1016/j.actamat.2012.11.039
21.
NiranjaniVL, KumarKCH, SarmaVS.Development of high strength Al–Mg–Si AA6061 alloy through cold rolling and ageing. Mater Sci Eng A. 2009;515:169–174. doi: 10.1016/j.msea.2009.03.077
22.
BaczynskiGJ, GuzzoR, BallMD, Development of roping in an aluminum automotive alloy AA6111. Acta Mater. 2000;48:3361–3376. doi: 10.1016/S1359-6454(00)00141-5
23.
LiuJT, DickRE, FridyJM, Crystallographic texture evolution of continuous cast Al–Mn–Mg alloy sheet during cold rolling and annealing. Mater Sci Eng A. 2007;458:73–87. doi: 10.1016/j.msea.2006.12.119
24.
WangT, YinZM, ShenK, Single-aging characteristics of 7055 aluminum alloy. Trans Nonferrous Met Soc China. 2007;17:548–552. doi: 10.1016/S1003-6326(07)60131-9
25.
GaoH, FengW, GuJ, Aging and recrystallization behavior of precipitation strengthened Al–0.25Zr– 0.03Y alloy. J Alloys Compd. 2017;696:1039–1045. doi: 10.1016/j.jallcom.2016.12.064
26.
PurcekG, YanarH, DemirtasM, Optimization of strength, ductility and electrical conductivity of Cu–Cr–Zr alloy by combining multi-route ECAP and aging. Mater Sci Eng A. 2016;649:114–122. doi: 10.1016/j.msea.2015.09.111
27.
SantosTG, MirandaRM, VilacaP, Modification of electrical conductivity by friction stir processing of aluminum alloys. Int J Adv Manuf Technol. 2011;57:511–519. doi: 10.1007/s00170-011-3308-4
28.
CuiXL, WuYY, LiuXF, Effects of grain refinement and boron treatment on electrical conductivity and mechanical properties of AA1070 aluminum. Mater Des. 2015;86:397–403. doi: 10.1016/j.matdes.2015.06.149
29.
HuX, JiangF, AiF, Effects of rare earth Er additions on microstructure development and mechanical properties of die-cast ADC12 aluminum alloy. J Alloys Compd. 2012;538:21–27. doi: 10.1016/j.jallcom.2012.05.089
30.
HanL, SuiY, WangQ, Effects of Nd on microstructure and mechanical properties of cast Al–Si–Cu–Ni–Mg piston alloys. J Alloys Compd. 2016;695:1566–1572. doi: 10.1016/j.jallcom.2016.10.300
31.
Jafari NodooshanHR, WuG, LiuW, Effect of Gd content on high temperature mechanical properties of Mg–Gd–Y–Zr alloy. Mater Sci Eng A. 2016;651:840–847. doi: 10.1016/j.msea.2015.11.047
32.
LiuY, HuangG, SunY, Effect of Mn and Fe on the formation of Fe- and Mn-rich intermetallics in Al–5Mg–Mn alloys solidified under near-rapid cooling. Materials (Basel). 2016;9:88. doi: 10.3390/ma9020088
33.
JiangF, ZhangH, MengX, Effects of Ti addition on the microstructures and mechanical properties of the Al–Mn–Mg–RE alloy. Mater Des. 2014;55:280–285. doi: 10.1016/j.matdes.2013.10.001
34.
AbbasiM, KheirandishS, KharraziY.The fracture and plastic deformation of aluminum alloyed Hadfield steels. Mater Sci Eng A. 2009;513–514:72–76. doi: 10.1016/j.msea.2009.02.023
35.
CaoF, LiZ, ZhangN, Superplasticity, flow and fracture mechanism in an Al–12.7Si–0.7Mg alloy. Mater Sci Eng A. 2013;571:167–183. doi: 10.1016/j.msea.2013.02.010
36.
LeoP, SpigarelliS, CerriE, High temperature mechanical properties of an aluminum alloy containing Zn and Mg. Mater Sci Eng A. 2012;550:206–213. doi: 10.1016/j.msea.2012.04.059
37.
RashedHMMA, RobsonJD, BatePS, Application of X-ray microtomography to analysis of cavitation in AZ61 magnesium alloy during hot deformation. Mater Sci Eng A. 2011;528:2610–2619. doi: 10.1016/j.msea.2010.11.083
38.
ManeshHD, TaheriAK.Bond strength and formability of an aluminum-clad steel sheet. J Alloys Compd. 2003;361:138–143. doi: 10.1016/S0925-8388(03)00392-X
