The crystallography and morphology of the nano-sized precipitate particles in a ternary Cu–Cr–Zr alloy were studied by transmission electron microscopy. A new type of face-centred-cubic (f.c.c) Cr-rich precipitate was observed. This precipitate is ordered and solute enriched on alternate {110} f.c.c planes, with an ellipsoid-shaped morphology. The new orientation relationship (OR) between the precipitate and Cu matrix satisfies [211]M//[011]p and [100]M//[111]p, {-111}M//{200}p and {02-2}M//{02-2}p. The difference between this new OR and the Nishiyama–Wasserman OR between body-centred-cubic (b.c.c) Cr and the Cu matrix can be detailed by Δg vectors in the diffraction patterns. Furthermore, the precipitation strengthening effect is increased greatly with the formation of these new precipitate particles when compared to binary Cu–Cr alloys.
LiuQ, ZhangX, GeY, Effect of processing and heat treatment on behavior of Cu–Cr–Zr alloys to railway contact wire. Metall Mater Trans A. 2006;37:3233–3238. doi: 10.1007/BF02586158
2.
SuJH, DongQM, LiuP, Research on aging precipitation in a Cu–Cr–Zr–Mg alloy. Mater Sci Eng A. 2005;392:422–426. doi: 10.1016/j.msea.2004.09.041
3.
XiaCD, JiaYL, ZhangW, Study of deformation and aging behaviors of a hot rolled–quenched Cu–Cr–Zr–Mg–Si alloy during thermomechanical treatments. Mater Des. 2012;39:404–409. doi: 10.1016/j.matdes.2012.03.003
4.
DengJ, ZhangX, ShangS, Effect of Zr addition on the microstructure and properties of Cu–10Cr in situ composites. Mater Des. 2009;30:4444–4449. doi: 10.1016/j.matdes.2009.04.017
5.
BatraIS, DeyGK, KulkarniUD, Microstructure and properties of a Cu–Cr–Zr alloy. J Nucl Mater. 2001;299:91–100. doi: 10.1016/S0022-3115(01)00691-2
6.
ShuklaAK, Narayana MurtySVS, Suresh KumarR, Effect of hot rolling on the enhancement of mechanical properties of low density Cu–Cr–Nb sintered alloy. Mater Des. 2013;43:125–133. doi: 10.1016/j.matdes.2012.06.041
7.
CorreiaJB, DaviesHA, SellarsCM.Strength in rapidly solidified age hardened Cu–Cr and Cu–Cr–Zr alloys. Acta Mater. 1997;45:177–190. doi: 10.1016/S1359-6454(96)00142-5
8.
HuangFX, MaJS, NingHL, Analysis of phases in a Cu–Cr–Zr alloy. Scr Mater. 2003;48:79–84. doi: 10.1016/S1359-6462(02)00350-0
9.
WatanabeC, MonzenR, TazakiK.Mechanical properties of Cu–Cr system alloys with and without Zr and Ag. J Mater Sci. 2008;43:813–819. doi: 10.1007/s10853-007-2159-8
10.
HatakeyamaM, ToyamaT, YangJ, 3D-AP and positron annihilation study of precipitation behavior in Cu–Cr–Zr alloy. J Nucl Mater. 2009;386:852–855. doi: 10.1016/j.jnucmat.2008.12.266
11.
ChbihiA, SauvageX, BlavetteD.Atomic scale investigation of Cr precipitation in copper. Acta Mater. 2012;60:4575–4585. doi: 10.1016/j.actamat.2012.01.038
12.
SinclairCW, EmburyJD, WeatherlyGC, Diffraction based characterization of a directionally solidified Cu–Cr eutectic alloy. J Cryst Growth. 2005;276,:321–331. doi: 10.1016/j.jcrysgro.2004.11.374
13.
DahmenU, WitcombMJ, WestmacottKH.Morphology of Cr precipitates in an overaged Cu-0.3Cr alloy. Scr Mater. 1988;22:1867–1872.
14.
LuoCP, DahmenU.Morphology and crystallography of Cr precipitates in a Cu-0.33 wt% Cr alloy. Acta Mater. 1994;42:1923–1932. doi: 10.1016/0956-7151(94)90017-5
15.
FujiiT, NakazawaH, KatoM, Crystallography and morphology of nanosized Cr particles in a Cu–0.2% Cr alloy. Acta Mater. 2000;48:1033–1045. doi: 10.1016/S1359-6454(99)00411-5
16.
TangNY, TaplinNM, DunlopGL.Precipitation and aging in high-conductivity Cu–Cr alloys with additions of zirconium and magnesium. Mater Sci Technol. 1985;1:270–275. doi: 10.1179/mst.1985.1.4.270
17.
LiuP, KangBX, CaoXG, Aging precipitation and recrystallization of rapidly solidified Cu–Cr–Zr–Mg alloy. Mater Sci Eng A. 1999;265:262–267. doi: 10.1016/S0921-5093(98)01149-6
18.
SuJH, LiuP, LiHJ, Phase transformation in Cu–Cr–Zr–Mg alloy. Mater Lett2007;61:4963–4966. doi: 10.1016/j.matlet.2007.03.085
19.
QiWX, TuJP, LiuF, Microstructure and tribological behavior of a peak aged Cu–Cr–Zr alloy. Mater Sci Eng A. 2003;343:89–96. doi: 10.1016/S0921-5093(02)00387-8
20.
MuSG, GuoFA, TangYQ, Study on microstructure and properties of aged Cu–Cr–Zr–Mg–RE alloy. Mater Sci Eng A. 2008;475:235–240. doi: 10.1016/j.msea.2007.04.056
21.
UweH, HermannS.The precipitation behavior of ITER-grade Cu–Cr–Zr alloy after simulating the thermal cycle of hot isostatic pressing. J Nucl Mater. 2000;279:31–45. doi: 10.1016/S0022-3115(99)00285-8
22.
BatraIS, DeyGK, KulkarniUD, Precipitation in a Cu–Cr–Zr alloy mater. Sci Eng A. 2003;356:32–36. doi: 10.1016/S0921-5093(02)00852-3
23.
ZengKJ, HamalainenM.Phase relationships in Cu-rich corner of the Cu–Cr–Zr phase diagram. Scr Mater. 1995;32:2009–2014. doi: 10.1016/0956-716X(95)00084-9
24.
ZengKJ, HamalainenM.A theoretical study of the phase equilibria in the Cu–Cr–Zr system. J Alloys Compd. 1995;220:53–61. doi: 10.1016/0925-8388(94)06029-0
25.
ZhangDL, MiharaK, TsubokawaS, Precipitation characteristics of Cu–15Cr–0.15Zr in situ composite. Mater Sci Technol. 2000;16:357–363. doi: 10.1179/026708300101507866
26.
HuT, ChenJH, LiuJR, The crystallographic and morphological evolution of the strengthening precipitates in Cu–Ni–Si alloys. Acta Mater. 2013;61:1210–1219. doi: 10.1016/j.actamat.2012.10.031
27.
ShiZZ, ZhangWZ.A transmission electron microscopy investigation of crystallography of τ-Mg32(Al, Zn)49 precipitates in a Mg–Zn–Al alloy. Scr Mater. 2011;64:201–204. doi: 10.1016/j.scriptamat.2010.09.044
28.
HirthJP, LotheJ.Theory of dislocations. New York: John Wiley & Sons; 1982.
29.
ZhangWZ, WeatherlyGC.On the crystallography of precipitation. Prog Mater Sci. 2005;50:181–292. doi: 10.1016/j.pmatsci.2004.04.002
30.
LiuCM.Phase diagrams of copper alloys. Changsha: Central South University Press; 2011(in Chinese).
