The microstructure and tensile properties of an aged U-5.5 wt-% Nb alloy have been experimentally investigated with the aim of obtaining the influence of strain rates on fracture behaviour. The result shows that strain to failure is sensitive to strain rate and decreases with an increase in the strain rate. Fracture surface analysis indicates that the alloy exhibits a typical ductile fracture. Two types of carbides (niobium carbide and uranium carbide), mainly distributed at the grain boundary, are confirmed, which participate in the process of fracture and are involved in different void nucleation mechanisms during the final ductility fracture. Namely, niobium carbide tends to generate voids by debonding with the matrix, while uranium carbide is more likely to experience cracking.
HaschkeJM. Corrosion of uranium in air and water vapor: consequences for environmental dispersal. J Alloys Compd. 1998;278:149–160. doi: 10.1016/S0925-8388(98)00639-2
2.
ToqueC, MilodowskiAE, BakerAC. The corrosion of depleted uranium in terrestrial and marine environments. J Environ Radioact. 2014;128:97–105. doi: 10.1016/j.jenvrad.2013.01.001
3.
SunwooA, GotoD. Effects of processing on microstructure and properties of α-uranium formed parts. Scr Mater. 2002;47:261–266. doi: 10.1016/S1359-6462(02)00137-9
4.
KnezevicM, CapolungoL, ToméCN, Anisotropic stress–strain response and microstructure evolution of textured α-uranium. Acta Mater. 2012;60:702–715. doi: 10.1016/j.actamat.2011.10.041
5.
HuddartJ, HardingJ, BleasdalePA. The effect of strain rate on the tensile flow and fracture of α-Uranium. J Nucl Mater. 1980;89:316–330. doi: 10.1016/0022-3115(80)90063-X
6.
SunwooAJ, HiromotoDS. Effects of natural aging on the tensile properties of water-quenched U-6%Nb alloy. J Nucl Mater. 2004;327:37–45. doi: 10.1016/j.jnucmat.2004.01.014
7.
CadyCM, GrayGTIII, ChenSR, Influence of temperature, strain rate and thermal aging on the structure/property behavior of uranium 6 wt% Nb. J Phys IV France. 2006;134:203–208. doi: 10.1051/jp4:2006134031
8.
WuY, WuQ, ZhuS, Effect of niobium element on the electrochemical corrosion behavior of depleted uranium. J Nucl Mater. 2016;478:7–12. doi: 10.1016/j.jnucmat.2016.05.035
9.
EckelmeyerKH, RomigAD, WeirickLJ. The effect of quench rate on the microstructure, mechanical properties, and corrosion behavior of U-6 wt pct Nb. Metall Trans A. 1984;15:1319–1330. doi: 10.1007/BF02648560
10.
AnagnostidisM, ColombiéM, MontiH. Phases metastables dans les alliages uranium-niobium. J Nucl Mater. 1964;11:67–76. doi: 10.1016/0022-3115(64)90122-9
11.
FieldRD, ThomaDJ. Crystallographic and kinetic origins of acicular and banded microstructures in U-Nb alloys. J Nucl Mater. 2013;436:105–117. doi: 10.1016/j.jnucmat.2013.01.309
12.
FieldRD, ThomaDJ, DunnPS, Martensitic structures and deformation twinning in the U-Nb shape-memory alloys. Philos Mag A. 2001;81:1691–1724. doi: 10.1080/01418610010010971
13.
ClarkeAJ, FieldRD, HackenbergRE, Low temperature age hardening in U-13at.% Nb: an assessment of chemical redistribution mechanisms. J Nucl Mater. 2009;393:282–291. doi: 10.1016/j.jnucmat.2009.06.025
SunTC, BridgesB. The development of a ductility-based aging model for low temperature aged U-6Nb alloy. Livermore ( TX): Lawrence Livermore National Laboratory; 2005. (Report UCRL/CONF/211065).
16.
RodriguezAK, AyoubGA, MansoorB, Effect of strain rate and temperature on fracture of magnesium alloy AZ31B. Acta Mater. 2016;112:194–208. doi: 10.1016/j.actamat.2016.03.061
17.
ZalkindS, SabagO, MakoverI, Influence of carbon on the tensile properties of U-0.1w%Cr. J Mater Sci Lett. 2002;21:551–553. doi: 10.1023/A:1015461022009
18.
ZubelewiczA, AddessioFL, CadyCM. A constitutive model for a uranium-niobium alloy. J Appl Phys. 2006;100:013523-1–013523-8. doi: 10.1063/1.2208907
19.
RosenRS, KassnerME, ThiehsenKE. The mechanical behaviour of U-6Nb alloy and AISI 1045 and 1215 steels at high strain rates. J Mater Sci Lett. 1992;11:125–128. doi: 10.1007/BF00724665
20.
DaviesDM, MartinJW. The effect of inclusions on the fracture of uranium. J Nucl Mater. 1961;3:156–161. doi: 10.1016/0022-3115(61)90003-4
21.
CalhounCA, GarleaE, SisnerosT, Effects of hydrogen on the mechanical response of α-uranium. J Nucl Mater. 2015;465:737–745. doi: 10.1016/j.jnucmat.2015.07.008
22.
MaidenCJ, MechJ. The strain-rate sensitivity of α-uranium. J Mech Phys Solids. 1959;7:106–110. doi: 10.1016/0022-5096(59)90015-8
23.
SaxtonHJ. Fracture of uranium alloys. In: BurkeJJ, editors. Physical metallurgy of uranium alloys. Chestnut Hill, MA: Brook Hill; 1974. p. 349–391.
24.
JiangCL, YangJX, XiaoH, Study on inclusions in U-Nb alloy. Rare Metal Mat Eng. 2008;37:98–100.
FrostBRT. The carbides of uranium. J Nucl Mater. 1963;10:265–300. doi: 10.1016/0022-3115(63)90181-8
28.
HackenbergRE. Synthesis and characterization of nonbanded U-Nb plate material. Los Alamos ( NM): Los Alamos National Laboratory; 2007. (Report LA/14316).
29.
BrownDW, BourkeMAM, StoutMG, Uniaxial tensile deformation of uranium 6 wt pct niobium: a neutron diffraction study of deformation twinning. Metall Mater Trans A. 2001;32:2219–2228. doi: 10.1007/s11661-001-0197-4
30.
AndersonTL. Fracture mechanisms in metals. In: Fracture mechanics: fundamentals and applications. 3rd ed. Chapter 5. New York ( NY): CRC Press; 2005. p. 219–256.
31.
DasA, TarafderS. Geometry of dimples and its correlation with mechanical properties in austenitic stainless steel. Scr Mater. 2008;59:1014–1017. doi: 10.1016/j.scriptamat.2008.07.012
32.
DasA, TarafderS. Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel. Int J Plast. 2009;25:2222–2247. doi: 10.1016/j.ijplas.2009.03.003
33.
Avramovic-CingaraG, SalehAR, JainMK, Void nucleation and growth in dual-phase steel 600 during uniaxial tensile testing. Metall Mater Trans A. 2009;40:3117–3127. doi: 10.1007/s11661-009-0030-z
