Based on Q345 steel, high-strength low-alloy surfacing layers with Nb content ranging from 0.0041 to 0.26 wt-% were prepared by adding Nb element into electrode coating and manual electric arc welding, the microstructure as well as mechanical properties of surfacing layers were evaluated and analysed. The experimental results show that with the increasing of Nb content, the grain size becomes smaller meanwhile the microstructure distribution is more uniform, the size of hard phase martensite/austenite gradually decreases and the NbC precipitates increases. The yield and tensile strength greatly increase for the fine-grain strengthening of Nb and the precipitation strengthening of NbC, moreover, the impact toughness is significantly improved due to the microstructure variation and obvious grain refinement.
QianQ., XuL. G. and ChangF. H.: ‘International welding engineering training course, part I: welding processed and equipment’, 2014, Harbin, Harbin Welding Training Institute.
2.
YaoS. S., LiG. Y. and HuW. B.: ‘Surface science and technology’, 2004, Beijing, Machinery Industry Press.
3.
DongZ. Y. and HuangQ. Y.: ‘Development status of surfacing welding in China and abroad’, Proceedings of the Eighth National Conference on Welding, Beijing, 1997, Machinery Industry Press.
4.
RenY. Y., ZhangG. S., WeiS. Z. and XuL. J.: ‘Development and prospect of surfacing welding technology in China’, Weld. Technol., 2012, 6, (41), 1–4.
5.
HanX. Y.: ‘Functions of Nb, V and Ti in micro-alloyed steel’, Wide Heavy Plate, 2006, 12, (1), 39–41.
6.
DeardoA. J.: ‘Niobium in modern steels', Int. Mater. Rev., 2003, 48, (6), 371–402. doi: 10.1179/095066003225008833
7.
TraintS., PichlerA., SierlingerR., PauliH. and WernerE.A.: ‘Low-alloyed TRIP-steels with optimized strength, forming and welding properties', Steel Res. Int., 2006, 77, (9), 641–649.
8.
HuH., XuG., WangL., XueZ. and ZhangY.: ‘The effects of Nb and Mo addition on transformation and properties in low carbon bainitic steels', Mater. Des., 2015, 84, (4), 95–99.
9.
QiJ. J., HuangY. H. and ZhangY.: ‘Micro-alloyed steels', 2006, Beijing, Metallurgy Industry Press.
10.
ChenX. W., QiaoG. Y., HanX. L., WangX. and XiaoF. R.: ‘Effects of Mo, Cr and Nb on microstructure and mechanical properties of heat affected zone for Nb-bearing X80 pipeline steels', Mater. Des., 2014, 53, (1), 888–901. doi: 10.1016/j.matdes.2013.07.037
11.
ChenX. W., LiaoB., QiaoG. Y., GuY. and XuW.: ‘Effect of Nb on mechanical properties of HAZ for high-Nb X80 pipeline Steels', J. Iron Steel Res. Int., 2013, 20, (12), 53–60. doi: 10.1016/S1006-706X(13)60216-2
12.
HemmatiI., OcelíkV. and De HossonJ. T. M.: ‘Toughening mechanism for Ni–Cr–B–Si–C laser deposited coatings', Mater. Sci. Eng. A – Struct., 2013, 582, 305–315. doi: 10.1016/j.msea.2013.06.010
13.
HemmatiI., HuizengaR. M., OcelíkV. and De HossonJ. T. M.: ‘Microstructural design of hardfacing Ni–Cr–B–Si–C alloys', Acta Mater., 2013, 61, 6061–6070. doi: 10.1016/j.actamat.2013.06.048
14.
RipollM. R., OjalaN., KatsichC., TotolinV. and TomastikC.: ‘The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings', Mater. Des., 2016, 99, 509–520.
15.
MeyerL., HeisterkampF. and MueschenbornW.: ‘Proc. Conf. on Microalloying 75’, New York, 1977, Union Carbide Corporation.
16.
HoogendoornT. M. and SpanraftM. J.: ‘Proc. Conf. on Microalloying 75’, New York, 1977, Union Carbide Corporation.
17.
XuG., LiuF., WangL. and HuH.: ‘A new approach to quantitative analysis of bainitic transformation in a superbainite steel’, Scr. Mater., 2013, 68, (11), 833–836. doi: 10.1016/j.scriptamat.2013.01.033
18.
HuF., HodgsonP. D. and WuK. M.: ‘Acceleration of the super bainite transformation through a coarse austenite grain size’, Mater. Lett., 2014, 122, (5), 240–243. doi: 10.1016/j.matlet.2014.02.051
19.
NieW., ShangC., WuS. J., ShiP. and ChengJ.: ‘Effects of Nb on recovery of hot-deformed austenite’, Acta Metall. Sin., 2012, 48, (7), 775–781. doi: 10.3724/SP.J.1037.2012.00189
20.
SkleničkaV., KuchařováK., KrálP., KvapilováM. and SvobodováM.: ‘The effect of hot bending and thermal ageing on creep and microstructure evolution in thick-walled P92 steel pipe’, Mater. Sci. Eng. A – Struct., 2015, 644, 297–309. doi: 10.1016/j.msea.2015.07.072
21.
HashimotoS., IkedaS., Koh-IchiS. and MiyakeS.: ‘Effects of Nb and Mo addition to 0.2%C-1.5%Si1.5%Mn steel on mechanical properties of Hot rolled TRIP-aided steel Sheets', ISIJ Int., 2004, 44, (9), 1590–1598. doi: 10.2355/isijinternational.44.1590
