The influence of yttrium on the microstructure and corrosion behaviour of as-cast Mg–8Li–3Al–2Zn–xY alloys was investigated. The results show that Y addition leads to the formation of Al2Y particles and the transformation of α-Mg from the long needle-like to the round-like. The noble Al2Y particles on the grain boundary inhibit the galvanic corrosion between β-Li phase and α-Mg phase, and also weaken the corrosion occurrence inside β-Li phase due to the decrease of the AlLi phase. With Y addition, the corrosion resistance is improved gradually, especially when the content of Y is up to 1.5 wt-%. Moreover, Y addition makes the corrosion film become more compact, which can prevent the base materials from being attacked continuously.
XuT., PengX., JiangJ., WeiG. and ZhangB.: ‘Microstructure and mechanical properties of superlight Mg-Li-Al-Zn wrought alloy’, Rare. Metal. Mat. Eng., 2014, 43, (8), 1815–1820. doi: 10.1016/S1875-5372(14)60137-5
2.
LiuX., ZhanH., GuS., QuZ., WuR. and ZhangM.: ‘Superplasticity in a two-phase Mg-8Li-2Zn alloy processed by two-pass extrusion’, Mater. Sci. Eng. A., 2011, 528, (19–20), 6157–6162. doi: 10.1016/j.msea.2011.04.073
3.
ZhuT., CuiC., ZhangT., WuR., BetsofenS., LengZ., ZhangJ. and ZhangM.: ‘Influence of the combined addition of Y and Nd on the microstructure and mechanical properties of Mg-Li alloy’, Mater. Des., 2014, 57, 245–249. doi: 10.1016/j.matdes.2013.12.057
4.
BaoL., LeQ., ZhangZ., CuiJ. and LiQ.: ‘Effect of homogenization treatment on microstructure evolution and the distributions of RE and Zr elements in various Mg-Li-RE-Zr alloys’, J. Magn. Alloy., 2013, 1, (2), 139–144. doi: 10.1016/j.jma.2013.07.003
5.
YuY. Q., PengX. D., YiH. Y. and LiuJ. W.: ‘Influence of various heat treatment on corrosion resistance of as-extruded Mg-9Li-3Al-2.5Sr alloys’, Mater. Sci. Forum., 2014, 788, 41-44. doi: 10.4028/www.scientific.net/MSF.788.41
6.
BinJ., YuhongL., RuihongL., QingX., YingZ. and FushengP.: ‘Effects of yttrium and strontium addition on electrochemical behavior of Mg-14Li-1Al alloys’, Rare. Metal. Mat. Eng., 2013, 42, (10), 1999–2003. doi: 10.1016/S1875-5372(14)60014-X
7.
XiaodongP., JunchenL., WenjuanL., YanY. and QunyiW.: ‘Effect of Y on microstructure and mechanical properties as well as corrosion resistance of Mg-9Li-3Al alloy’, Rare. Metal. Mat. Eng., 2013, 42, (10), 1993–1998. doi: 10.1016/S1875-5372(14)60013-8
8.
ZhangB., PengX. D., MaY., LiY. M., YuY. Q. and WeiG. B.: ‘Microstructure and mechanical properties of Mg–9Li–3Al–xGd alloys’, Mater. Sci. Technol., 2014, 31, (9), 1035–1041. doi: 10.1179/1743284714Y.0000000711
9.
CuiC., WuL., WuR., ZhangJ. and ZhangM.: ‘Influence of yttrium on microstructure and mechanical properties of as-cast Mg-5Li-3Al-2Zn alloy’, J. Alloys compd., 2011, 509, (37), 9045–9049. doi: 10.1016/j.jallcom.2011.04.030
10.
LvY., LiuM., XuY., CaoD. and FengJ.: ‘The electrochemical behaviors of Mg-8Li-3Al-0.5Zn and Mg-8Li-3Al-1.0Zn in sodium chloride solution’, J. Power. Sources, 2013, 225, 124–128. doi: 10.1016/j.jpowsour.2012.09.088
11.
QuZ., WuL., WuR., ZhangJ., ZhangM. and LiuB.: ‘Microstructures and tensile properties of hot extruded Mg-5Li-3Al-2Zn-xRE(Rare Earths) alloys’, Mater. Des., 2014, 54, 792–795. doi: 10.1016/j.matdes.2013.08.077
12.
WuL., CuiC., WuR., LiJ., ZhanH. and ZhangM.: ‘Effects of Ce-rich RE additions and heat treatment on the microstructure and tensile properties of Mg-Li-Al-Zn-based alloy’, Mater. Sci. Eng. A., 2011, 528, (4–5), 2174–2179. doi: 10.1016/j.msea.2010.11.063
ZhouW. R., ZhengY. F., LeeflangM. A. and ZhouJ.: ‘Mechanical property, biocorrosion and in vitro biocompatibility evaluations of Mg-Li-(Al)-(RE) alloys for future cardiovascular stent application’, Acta Bioma., 2013, 9, (10), 8488–8498. doi: 10.1016/j.actbio.2013.01.032
15.
LiuM., SchmutzP., UggowitzerP. J., SongG. and AtrensA.: ‘The influence of yttrium (Y) on the corrosion of Mg–Y binary alloys’, Corros. Sci., 2010, 52, (11), 3687–3701. doi: 10.1016/j.corsci.2010.07.019
16.
LuoT. J., YangY. S., LiY. J. and DongX. G.: ‘Influence of rare earth Y on the corrosion behavior of as-cast AZ91 alloy’, Electrochimi. Acta., 2009, 54, (26), 6433–6437. doi: 10.1016/j.electacta.2009.06.023
17.
BobyA., SrinivasanA., PillaiU. T. S. and PaiB. C.: ‘Mechanical characterization and corrosion behavior of newly designed Sn and Y added AZ91 alloy’, Mater. Des., 2015, 88, 871–879.
18.
LuoT. J. and YangY. S.: ‘Corrosion properties and corrosion evolution of as-cast AZ91 alloy with rare earth yttrium’, Mater. Des., 2011, 32, (10), 5043–5048. doi: 10.1016/j.matdes.2011.05.038
19.
ZhangJ., NiuX., QiuX., LiuK., NanC., TangD. and MengJ.: ‘Effect of yttrium-rich misch metal on the microstructures, mechanical properties and corrosion behavior of die cast AZ91 alloy’, J. Alloys Compd., 2009, 471, (1-2), 322–330. doi: 10.1016/j.jallcom.2008.03.089
20.
JiaR., ZhangM., ZhangL., ZhangW. and GuoF.: ‘Correlative change of corrosion behavior with the microstructure of AZ91 Mg alloy modified with Y additions’, J. Alloys Compd., 2015, 634, 263–271. doi: 10.1016/j.jallcom.2015.02.019
21.
ZhangL.-n., JiaR., LiD., ZhangW. and GuoF.: ‘Effect of intermetallic phases on corrosion initiation of AZ91 alloy with rare earth Y addition’, J Mater. Sci. Technol, 2015, 31, (5), 504–511. doi: 10.1016/j.jmst.2014.09.018
LiL. and NamN. D.: ‘Effect of yttrium on corrosion behavior of extruded AZ61 Mg alloy’, J. Magn. Alloy, 2016, 4, (1), 44–51. doi: 10.1016/j.jma.2015.11.008
24.
ZhaoJ., ZhangJ., LiuW., WuG. and ZhangL.: ‘Effect of Y content on microstructure and mechanical properties of as-cast Mg–8Li–3Al–2Zn alloy with duplex structure’, Mater. Sci. Eng. A., 2016, 650, 240–247. doi: 10.1016/j.msea.2015.10.067
25.
ZhangK., ZhangX., DengX., LiX. and MaM.: ‘Relationship between extrusion, Y and corrosion behavior of Mg–Y alloy in NaCl aqueous solution’, J. Magn. Alloy, 2013, 1, (2), 134–138. doi: 10.1016/j.jma.2013.07.002
26.
ZhouX., HuangY., WeiZ., ChenQ. and GanF.: ‘Improvement of corrosion resistance of AZ91D magnesium alloy by holmium addition’, Corros. Sci., 2006, 48, (12), 4223–4233. doi: 10.1016/j.corsci.2006.03.017
27.
WangQ., LiuY., FangS., SongY., ZhangD., ZhangL. and LiC.: ‘Evaluating the improvement of corrosion residual strength by adding 1.0wt.% yttrium into an AZ91D magnesium alloy’, Mater. Charact., 2010, 61, (6), 674–682. doi: 10.1016/j.matchar.2010.03.013
28.
ZengR.-C., SunL., ZhengY.-F., CuiH.-Z. and HanE.-H.: ‘Corrosion and characterisation of dual phase Mg–Li–Ca alloy in Hank's solution: The influence of microstructural features’, Corros. Sci., 2014, 79, 69–82. doi: 10.1016/j.corsci.2013.10.028
29.
SongY., ShanD., ChenR. and HanE.-H.: ‘Corrosion characterization of Mg–8Li alloy in NaCl solution’, Corros. Sci., 2009, 51, (5), 1087–1094. doi: 10.1016/j.corsci.2009.03.011
30.
YangL., JiangQ., ZhengM., HouB. and LiY.: ‘Corrosion behavior of Mg-8Li-3Zn-Al alloy in neutral 3.5% NaCl solution’, J. Magn. Alloy, 2016, 4, (1), 22–26. doi: 10.1016/j.jma.2015.12.002
