Advanced metallic alloys for the fossil fuel industries

Kyriakides S. and Corona E. : ‘Mechanics of offshore pipelines’, 1st edn, Vol. 1, ‘Buckling and collapse’, 63, 387; 2007, Oxford, UK, Elsevier.

Smyth D. , Lessard R. G. and Minden F. : ‘ASM handbook: irons, steels, and high-performance alloys’, Vol. 1, Chap. 25, 327–336; 1990, ASM International.

Shiga C. , Amano K. , Hatomura T. , Saito Y. , Hirose K. and Choji T. : ‘Ferrite-fine bainite steel line pipe of X70 and X80 grades for low-temperature service’ in ‘Steels for line pipe and pipeline fittings’, 127–135; 1983, London, UK, Metals Society.

Tamehiro H. , Nishioka K. , Murata M. , Habu R. and Kawada Y. : ‘Properties of high toughness X80 line pipe steels’ in ‘Int. Symposium on accelerated cooling of rolled steel’, 1–8; 1987, Winnipeg, Canada, Canadian Institute of Metals.

Du Y. , Wu K. M. , Cheng L. , Li Y. , Isayev O. and Hress O. : ‘Effect of Zr–Ti deoxidization on the hydrogen-induced cracking of X65 pipeline steels’, Mater. Sci. Technol., 2016.

Baker T. N. : ‘Role of zirconium in microalloyed steels: a review’, Mater. Sci. Technol., 2015, 31, 265–294.

Hejazi D. , Dunne D. , Calka A. and Pereloma E. : ‘Effect of gaseous hydrogen charging on the tensile properties of standard and medium Mn X70 pipeline steels’, Mater. Sci. Technol., 2016.

Bhadeshia H. K. D. H. : ‘Bainite in steels: theory and practice’, 3rd edn; 2015, Leeds, UK, Maney Publishing.

Lavigne O. , Gamboa E. , Griggs J. , Luzin V. , Law M. and Roccisano A. : ‘High-pH inclined stress corrosion cracking in Australian and Canadian gas pipeline X65 steels’, Mater. Sci. Technol., 2016.

Arafin M. A. and Szpunar J. A. : ‘A new understanding of intergranular stress corrosion cracking resistance of pipeline steel through grain boundary character and crystallographic texture studies’, Corros. Sci., 2009, 51, 119–128.

Deleume J. , Cloué J. M. and Andrieu E. : ‘Influence of delta phase precipitation on the stress corrosion cracking resistance of alloy 718 in PWR primary water’, J. Nucl. Mater., 2008, 382, 70–75.

Wang X. L. , Tsai Y. T. , Yang J. R. , Shang C. J. , Wang X. M. , Dong L. M. and Yang W. W. : ‘Investigation of the microstructure and toughness of 550 MPa grade pipeline after the hot bending process’, Mater. Sci. Technol., 2016.

Garcin T. , Militzer M. , Poole W. J. and Collins L. : ‘Microstructure model for the heat affected zone of X80 line pipe steel’, Mater. Sci. Technol., 2016.

Yan P. and Bhadeshia H. K. D. H. : ‘The austenite-ferrite transformation in enhanced-niobium, low-carbon steel’, Mater. Sci. Technol., 2015, 31, 1066–1076.