OsakadaK. and ShiomiM.: ‘Flexible manufacturing of metallic products by selective laser melting of powder’, Int. J. Mach. Tool Manufact., 2006, 46, 1188–1193. doi: 10.1016/j.ijmachtools.2006.01.024
2.
CarterL. N., WangX., ReadN., KhanR., SegerraM. A., EssaK. and AttallahM. M.: ‘Process optimisation of selective laser melting using energy density model for nickel-based superalloys’, Mater. Sci. Technol., 2016.
3.
ManfrediD., TrevisanF., PakkanenJ., CalignanoF., AbrosioE. P., anfM. L., PaveseM. and FinoP.: ‘Mechanical properties of lightweight alloys by selective laser melting for aerospace applications’, Mater. Sci. Technol., 2016.
4.
GreitemeierD., DonneC. D., SyassenF., EufingerJ. and MetzT.: ‘Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V’, Mater. Sci. Technol., 2016.
5.
FrazierW. E.: ‘Metal additive manufacturing: a review’, J. Mater. Eng. Perform., 2014, 23, 1917–1928. doi: 10.1007/s11665-014-0958-z
6.
WilliamsS. W., MartinaF., AddisonA. C., DingJ., PardalG. and ColegroveP.: ‘Wire + arc additive manufacturing’, Mater. Sci. Technol., 2016.
7.
DaiD. and GuD.: ‘Tailored reinforcement/matrix interface and thermodynamic mechanism during selective laser melting composites’, Mater. Sci. Technol., 2016.
8.
DebRoyT. and DavidS. A.: ‘Physical processes in fusion welding’, Rev. Mod. Phys., 1995, 67, 85–112. doi: 10.1103/RevModPhys.67.85
9.
WangM., TasanC. C., KoyamaM., PongeD. and RaabeD.: ‘Enhancing hydrogen embrittlement resistance of lath martensite by introducing nano-films of interlath austenite’, Metall. Mater. Trans. A, 2015, 46, 3797–3802. doi: 10.1007/s11661-015-3009-y
10.
XieX., ShenJ., GongF. and LiY.: ‘Effects of current on nanoparticle reinforced magnesium alloy welding joints’, Sci. Technol. Weld. Join., 2015, 20, 686–692. doi: 10.1179/1362171815Y.0000000055
11.
AshbyM. F., EvansA. G., FleckN. A., GibsonL. J., HutchinsonJ. W. and WadleyH. N. G.: ‘Metal foams: a design guide’, 2000, Oxford, UK, Butterworth Heinemann.
12.
TangY., ZhouY., HoffT., GaronM. and ZhaoF. Y.: ‘Elastic modulus of 316 stainless-steel lattice structure fabricated via binder jetting process’, Mater. Sci. Technol., 2016.
