Investigations on the microstructure of low-alloy steel in the as-received condition and after 70 000 h ageing at 550 and 600°C were carried out. For the recorded images of the microstructure, a quantitative analysis of precipitates was performed. On that basis, a statistical analysis of collected data was made with the aim of estimating parameters of selected theoretical statistical distribution. Then, the forecast for average precipitate diameter and standard deviation of such a distribution for the time of 100 000 h at 550 and 600°C was calculated. The obtained results of investigations confirm the possibility of using, in evaluation of degradation degree for materials in use, the forecasting methods derived from mathematical statistics.
GongZ., DingandW. and WangB.: ‘Microstructure and precipitation behavior of T23 steel after long time service’, Heat Treat. Met., 2013, 4, 78–81.
2.
GolańskiG., ZielińskiA., SłaniaJ. and JasakJ.: ‘Mechanical properties of VM12 steel after 30 000 hrs of ageing at 600°C temperature’, Arch. Metall. Mater., 2014, 59, (4), 1350–1354.
3.
ZielińskiA., GolańskiG., SrokaM. and TańskiT.: ‘Influence of long-term service on microstructure, mechanical properties, and service life of HCM12A steel’, Mater. High Temp., 2015. doi:10.1179/1878641315Y.0000000015.
4.
DobrzańskiJ.: ‘Materials science interpretation of the life of steels for power plants’, Open Access Library, 2011, 3, 1–228.
5.
ZielińskiA., GolańskiG., SrokaM. and DobrzańskiJ.: ‘Estimation of long-term creep strength in austenitic power plant’, Mater. Sci. Tech-Lond., 2015. doi:10.1179/1743284715Y.0000000137.
6.
ViswanathanR., HenryJ. F., TanzoshJ., StankoG., ShingledeckerJ., VitalisB. and PurgertR.: ‘US program on materials technology for ultra-supercritical coal power plants’, J Mater. Eng. Perform., 2005, 14, (3), 281–292.
7.
ZielińskiA. and GolańskiG.: ‘The influence of repair welded joint on the life of steam pipeline made of Cr-Mo steel serviced beyond the calculated working time’, Arch. Metall. Mater., 2015, 60, (2), 1045–1049. doi:10.1515/amm-2015-0257.
8.
HernasA. and DobrzańskiJ.: ‘Life-time and damage of boilers and steam turbines elements’; 2003, Gliwice, Publishing House of the Silesian University of Technology (in Polish).
9.
DudaP., FelkowskiŁ. and DobrzańskiJ.: ‘An analysis of an incident during the renovation work of a power boiler superheater’, Eng. Fail. Anal., 2015, 57, 248–253.
10.
GolańskiG., ZielińskiA. and Zielińska-LipiecA.: ‘Degradation of microstructure and mechanical properties in martensitic cast steel after ageing’, Materialwiss. Werkst., 2015, 46, (3), 248–255.
11.
GuoX., GongJ., JiangY., WangX. and ZhaoY.: ‘Microstructures and high-temperature mechanical properties in 9Cr-0.5 Mo-1.8 W-VNb steel after aging at 650° C’, Mater. High Temp., 2015, 32, (6), 566–574. doi:10.1179/1878641315Y-0000000003.
12.
GirouxP. F., DalleF., SauzayM., MalaplateJ., FournierB. and Gourgues-LorenzonA. F.: ‘Mechanical and microstructural stability of P92 steel under uniaxial tension at high temperature’, Mater. Sci. Eng. A, 2010, 527, (16), 3984–3993.
13.
HaldJ.: ‘Microstructure and long-term creep properties of 9–12% Cr steels’, Int. J Pres. Ves. Pip., 2008, 85, (1), 30–37.
14.
GelmanA., CarlinJ. B., SternH. S., DunsonD. B., VehtariA. and RubinD. B.: ‘Bayesian data analysis’; 2013, Boca Raton, FL, CRC Press.
15.
AdrianH., Augustyn-PieniążekJ., MarynowskiP. and MatusiewiczP.: ‘Model of carbonitride precipitation kinetics in microalloyed steel’, Hutnik, Wiadomości Hutnicze, 2014, 81, (4), 208–214.
16.
PN-EN 10216-2:2009 ‘Seamless steel tubes for pressure purposes. Technical delivery conditions.’ Part 2: ‘Non-alloy and alloy steel tubes with specified elevated temperature properties’; 2009.
17.
BoxG. E. P., JenkinsG. M. and ReinselG. C.: ‘Time series analysis, forecasting and control’; 2008, Hoboken, NJ, Wiley.
18.
FiszM.: ‘Probability theory and mathematical statistics’; 1980, Hoboken, NJ, John Wiley and Sons.
19.
ZielińskiA., GolańskiG. and SrokaM.: ‘Assessment of microstructure stability and mechanical properties of X10CrWMoVNb9-2 (P92) steel after long-term thermal ageing for high-temperature applications’, Kovove Mater., 2016, 54, (1), 51–61.
20.
Rabe-HeskethS. and SkrondalA.: ‘Multilevel and longitudinal modeling using Stata’, vol. I, II; 2012, College Station, TX, Stata Press.
21.
RossS. M.: ‘Introduction to probability and statistics for engineers and scientists’; 2014, London, Elsevier.
22.
ZielińskiA., GolańskiG., SrokaM. and SkupieńP.: ‘Microstructure and mechanical properties of the T23 steel after long-term ageing at elevated temperature’, Mater. High Temp., 2016. doi:10.1080/09603409.2016.1139306.
23.
RodakK., HernasA. and KiełbusA.: ‘Characteristics of new low-alloy steel T23 for power industry’, Proc. 10th Jub. Int. Sc. Conf. Achiev. Mech. & Mat. Eng., Gliwice, Cracow, Zakopane, Poland, 2001, 483–486.
24.
WangL., ZhuL., DengY., WangQ. and ZouF.: ‘Mechanical properties and microstructural evolution of T23 heat-resistant steel during aging at 873K’, High Temp. Mat. Pr-Isr., 2008, 27, (1), 11–18.
25.
CoxN. J.: ‘Speaking Stata: density probability plots’, Stata J., 2005, 5, (2), 259–273.
26.
Salgado-UgarteI. H., ShimizuM. and TaniuchiT.: ‘Exploring the shape of univariate data using kernel density estimators’, Stata. Tech. Bull., 1993, 3, 155–173.
