Quantifying the metallurgical response of a nuclear steel to welding thermal cycles

Abstract

Solid-state phase transformations can drastically influence the evolution of stress in welds due to the strains associated with the transformations and related changes in mechanical properties. As such, finite-element predictions of welding residual stresses need reliable materials data including, where applicable, information on phase transformation kinetics and phase- and temperature-dependent material properties. Owing to a scarcity of such data, many authors have used uncalibrated empirical modelling approaches for the prediction of welding residual stresses. This paper addresses this critical shortage for an important nuclear pressure vessel (SA508) steel. Austenite formation, grain growth and decomposition data are presented and subsequently used to calibrate transformation models. These models are shown to accurately predict microstructure and residual stresses for experimental test cases.

This paper is part of a Themed Issue on Measurement, modelling and mitigation of residual stress.

Keywords

Bainite Dilatometry Martensite Modelling SA508 steel Transformation plasticity

Get full access to this article

View all access options for this article.

References

Withers

P. J.

and Bhadeshia

H. K. D. H.

: ‘Residual stress. Part 1 – measurement techniques’, Mater. Sci. Technol., 2001, 17, 355–365. doi: 10.1179/026708301101509980

British Energy . R6 Revision 4: Assessment of the integrity of structures containing defects. 2000.

Smith

M. C.

, Bouchard

P. J.

, Turski

, Edwards

and Dennis

R. J.

: ‘Accurate prediction of residual stress in stainless steel welds’, Comput. Mater. Sci., 2012, 54, 312–328. doi: 10.1016/j.commatsci.2011.10.024

Francis

J. A.

, Bhadeshia

H. K. D. H.

and Withers

P. J.

: ‘Welding residual stresses in ferritic power plant steels’, Mater. Sci. Technol., 2007, 23, 1009–1020. doi: 10.1179/174328407X213116

Mark

A. F.

, Francis

J. A.

, Dai

, Turski

, Hurrell

P. R.

, Bate

S. K.

, Kornmeier

J. R.,

and Withers

P. J.

: ‘On the evolution of local material properties and residual stress in a three-pass SA508 steel weld’, Acta Mater., 2012, 60, 3268–3278. doi: 10.1016/j.actamat.2012.03.022

Dai

, Francis

J. A.

, Stone

H. J.

, Bhadeshia

H. K. D. H.

and Withers

P. J.

: ‘Characterizing phase transformations and their effects on ferritic weld residual stresses with X-rays and neutrons’, Metall. Mater. Trans. A, 2008, 39, 3070–3078. doi: 10.1007/s11661-008-9616-0

Greenwood

G. W.

and Johnson

R. H.

: ‘The deformation of metals under small stresses during phase transformations’, Proc. R. Soc. Lond. Ser. A: Math. Phys. Sci., 1965, 283, 403–422. doi: 10.1098/rspa.1965.0029

Barbe

, Quey

, Taleb

and Souza de Cursi

: ‘Numerical modelling of the plasticity induced during diffusive transformation. An ensemble averaging approach for the case of random arrays of nuclei’, Eur. J. Mech. A/Solids, 2008, 27, 1121–1139. doi: 10.1016/j.euromechsol.2008.01.005

Bhadeshia

H. K. D. H.

: ‘TRIP-assisted steels?’, ISIJ Int., 2002, 42, 1059–1060. doi: 10.2355/isijinternational.42.1059

10.

Hamelin

C. J.

, Muránsky

, Smith

M. C.

, Holden

T. M.

, Luzin

, Bendeich

P. J.

and Edwards

: ‘Validation of a numerical model used to predict phase distribution and residual stress in ferritic steel weldments’, Acta Mater., 2014, 75, 1–19. doi: 10.1016/j.actamat.2014.04.045

11.

Bhadeshia

H. K. D. H.

: ‘Some phase transformations in steels’, Mater. Sci. Technol., 1999, 15, 22–29. doi: 10.1179/026708399773002773

12.

Bhadeshia

H. K. D. H.

and Honeycombe

R. W. K.

: ‘Steels microstructure properties’, 129–154; 2006, Oxford, Butterworth-Heinemann.

13.

Bhadeshia

H. K. D. H.

: ‘Modelling of phase transformations in steel weld metal’, Proc. ECOMAP'98, 35–44; 1998, High Temperature Society of Japan.

14.

Moat

R. J.

, Stone

H. J.

, Shirzadi

, Francis

J. A.

, Kundu

, Mark

A. F.

, Bhadeshia

H. K. D. H.

, Karlsson

and Withers

P. J.

: ‘Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds’, Sci. Technol. Weld. Join., 2011, 16, 279–284. doi: 10.1179/1362171811Y.0000000003

15.

Koistinen

D. P.

and Marburger

R. E.

: ‘A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels’, Acta Mater., 1959, 7, 59–60. doi: 10.1016/0001-6160(59)90170-1

16.

Deng

and Murakawa

: ‘Finite element analysis of temperature field, microstructure and residual stress in multi-pass butt-welded 2.25Cr–1Mo steel pipes’, Comput. Mater. Sci., 2008, 43, 681–695. doi: 10.1016/j.commatsci.2008.01.025

17.

Markworth

A. J.

and Glasser

M. L.

: ‘Kinetics of anisothermal phase transformations’, J. Appl. Phys., 1983, 54, 3502–3508. doi: 10.1063/1.332416

18.

Victor Li

, Niebuhr

D. V.

, Meekisho

L. L.

and Atteridge

D. G.

: ‘A computational model for the prediction of steel hardenability’, Metall. Mater. Trans. B, 1998, 29, 661–672. doi: 10.1007/s11663-998-0101-3

19.

Hamelin

C. J.

, Muránsky

and Edwards

: ‘The influence of austenite grain size during welding simulations of ferritic steels’, Adv. Mater. Res., 2014, 996, 512–517. doi: 10.4028/www.scientific.net/AMR.996.512

20.

Van Bohemen

S. M. C.

and Sietsma

: ‘The kinetics of bainite and martensite formation in steels during cooling’, Mater. Sci. Eng. A, 2010, 527, 6672–6676. doi: 10.1016/j.msea.2010.06.091

21.

Mark

A. F.

, Moat

, Forsey

, Abdolvand

and Withers

P. J.

: ‘A new method for quantifying anisotropic martensitic transformation strains accumulated during constrained cooling’, Mater. Sci. Eng. A, 2014, 611, 354–361. doi: 10.1016/j.msea.2014.06.012

22.

Leblond

J. B.

and Devaux

: ‘A new kinetic model for anisothermal metallurgical transformations in steels including effect of austenite grain size’, Acta Metall., 1984, 32, 137–146. doi: 10.1016/0001-6160(84)90211-6

23.

Ashby

M. F.

and Easterling

K. E.

: ‘A first report on diagrams for grain growth in welds’, Acta Metall., 1982, 30, 1969–1978. doi: 10.1016/0001-6160(82)90100-6

24.

Pous-Romero

, Lonardelli

, Cogswell

and Bhadeshia

H. K. D. H.

: ‘Austenite grain growth in a nuclear pressure vessel steel’, Mater. Sci. Eng. A, 2013, 567, 72–79. doi: 10.1016/j.msea.2013.01.005

25.

Leblond

J. B.

, Mottet

and Devaux

J. C.

: ‘A theoretical and numerical approach to the plastic behaviour of steels during phase transformations—I. Derivation of general relations’, J. Mech. Phys. Solids, 1986, 34, 395–409. doi: 10.1016/0022-5096(86)90009-8

26.

Yang

H.-S.

and Bhadeshia

H. K. D. H.

: ‘Uncertainties in dilatometric determination of martensite start temperature’, Mater. Sci. Technol., 2007, 23, 556–560. doi: 10.1179/174328407X176857

27.

ASTM E112-96 : ‘Standard test methods for determining average grain size. 96, 2006.

28.

Maynier

, Dollet

and Bastien

: ‘Prediction of microstructure via empirical formulae based on CCT diagrams’ in ‘Hardenability concepts with applications to steels’, (ed. D.V. Doane and J. Kirkaldy), 163; 1977, Chicago, AIME.

29.

Kung

C. Y.

and Rayment

J. J.

: ‘An examination of the validity of existing empirical formulae for the calculation of ms temperature’, Metall. Trans. A, 1982, 13, 328–331. doi: 10.1007/BF02643327

30.

Ohms

, Martins

R. V.

, Uca

, Youstos

A. G.

, Bouchard

P. J.

, Smith

M. C.

, Keavey

, Bate

S. K.

, Gilles

, Wimpory

R. C.

and Edwards

: ‘The European network on neutron techniques standardization for structural integrity – NET’, Proc. PVP2008 2008 ASME Press. Vessel. Pip. Div. Conf.; 2008.

31.

Smith

M. C.

, Bate

S. K.

and Bouchard

P. J.

: ‘Simple benchmark problems for finite element weld residual stress simulation’, Proc. ASME 2013 Press. Vessel. Pip. Conf. PVP2013, 1–15; 2013.

32.

H. Abdolvand, M. Keavey, H. Dai, A. F. Mark, N. O'Meara, J. Walsh, S. Bate, B. Pellereau, J. A. Francis and P. J. Withers: ‘On the stress development in SA508 autogenous weld’, Mater. Sci. Forum, 2014, 783–786, 2123–2128. doi: 10.4028/www.scientific.net/MSF.783-786.2123

33.

Goldak

, Chakravarti

and Bibby

: ‘A new finite element model for welding heat sources’, Metall. Trans. B, 1984, 15B, 299–305. doi: 10.1007/BF02667333

34.

Leblond

J. B.

, Mottet

and Devaux

J. C.

: ‘A theoretical and numerical approach to the plastic behaviour of steels during phase transformations—II. Study of classical plasticity for ideal-plastic phases’, J. Mech. Phys. Solids, 1986, 34, 411–432. doi: 10.1016/0022-5096(86)90010-4

35.

Chaboche

J. L.

: ‘A review of some plasticity and viscoplasticity constitutive theories’, Int. J. Plast., 2008, 24, 1642–1693. doi: 10.1016/j.ijplas.2008.03.009

36.

O'Meara

, Smith

S. D.

and Francis

J. A.

: ‘Calibrating phase transformation and grain growth models and measuring phase dependent material properties for use in Fe simulations of welds’, Proc. ASME 2015 Press. Vessel. Pip. Conf. PVP2015, 1–10; 2015.