Narrow-gap tungsten inert gas welding with in situ protective system is applied to 78-mm-thick Ti–6Al–4V alloy. The martensite basketweave microstructure is formed in fusion zone (FZ), and heat-affected zone (HAZ) near FZ consists of acicular martensite and a small portion of primary alpha phase. The HAZ near base metal (BM) consists of primary alpha and transformed beta phase. Microhardness values of FZ and HAZ are relatively higher, and peak values appear at HAZ near FZ. The mechanical heterogeneity is dependent on variation of beta phase and martensite, which in turn depend on specific thermal cycle(s). The average tensile strength reaches 783.3 MPa and is 91.2% of BM, which appears in the middle of the weld with orthogonal martensites.
BabuN. K. and RamanS. G. S.: ‘Influence of current pulsing on microstructure and mechanical properties of Ti-6Al-4V TIG weldments’, Sci. Technol. Weld. Join., 2006, 11, (4), 442–447. doi: 10.1179/174329306X120750
2.
BoyerR. R.: ‘An overview on the use of titanium in the aerospace industry’, Mater. Sci. Eng. A, 1996, 213, 103–114. doi: 10.1016/0921-5093(96)10233-1
3.
SahooR., JhaB. B. and SahooT. K.: ‘Effect of primary alpha phase variation on mechanical behaviour of Ti-6Al-4V alloy’, Mater. Sci. Technol., 2015, 31, (12), 1486–1494. doi: 10.1179/1743284714Y.0000000736
4.
BarredaJ. L., SantamarmiaF., AzpirozX., IrisarriA. M. and VaronaJ. M.: ‘Electron beam welded high thickness Ti-6Al-4V plates using filler metal of similar and different composition to the base plate’, Vacuum, 2001, 62, 143–150. doi: 10.1016/S0042-207X(00)00454-1
5.
UcokI., KramerL. S., GungorM. N., WolfeP., DongH. and TroyT. W.: ‘Effect of welding on microstructure and tensile properties of flow formed Ti-6Al-4V tubes’, Mater. Sci. Eng. A, 2005, 410–411, 160–164. doi: 10.1016/j.msea.2005.08.174
6.
ChiangS. and AlbrightC. E.: ‘The limit of joint penetration in high energy density beam welding’, Weld. J., 1993, 3, 117–121.
7.
BeckerD. W. and AdamsC. M. J.: ‘The role of pulsed GTA welding variables in solidification and grain refinement’, Weld. J., 1979, 58, 143–151.
8.
BalachamdarK., SarmaV. S., PantB. and PhanickumarG.: ‘Microstructure and mechanical properties of gas-tungsten-arc-welded Ti-15–3 beta titanium alloy’, Metall. Mater. Trans. A, 2009, 40, 2685–2693. doi: 10.1007/s11661-009-9952-8
9.
SquillaceA., PriscoU. and CilibertoS.: ‘Effect of welding parameters on morphology and mechanical properties of Ti-6Al-4V laser beam welded butt joints’, J. Mater. Process. Technol., 2012, 212, 427–436. doi: 10.1016/j.jmatprotec.2011.10.005
10.
BlackburnJ. E., AllenC. M., HiltonP. A., LiL., HoqueM. I. and KhanA. H.: ‘Modulated Nd: YAG laser welding of Ti-6Al-4V’, Sci. Technol. Weld. Join., 2010, 15, (5), 433–439. doi: 10.1179/136217110X12731414739718
11.
BalasubramanianT. S., BalakrishnanM., BalasubramanianV. and ManickamM. A. M.: ‘Effect of welding processes on joint characteristics of Ti-6Al-4V alloy’, Sci. Technol. Weld. Join., 2011, 16, (8), 702–708. doi: 10.1179/1362171811Y.0000000062
12.
BarredaJ. L., AzpirozX. and IrisarriA. M.: ‘Influence of the filler metal on the mechanical properties of Ti-6Al-4V electron beam weldments’, Vacuum, 2010, 85, 10–15. doi: 10.1016/j.vacuum.2009.10.047
13.
SareshN., PillaiM. G. and MathewmJ.: ‘Investigations into the effects of electron beam welding on thick Ti-6Al-4V titanium alloy’, J. Mater. Process. Technol., 2007, 192–193, 83–88. doi: 10.1016/j.jmatprotec.2007.04.048
14.
LuW., ShiY. W. and LeiY. P.: ‘Effect of electron beam welding on the microstructures and mechanical properties of thick TC4-DT alloy’, Mater. Des., 2012, 34, 509–515. doi: 10.1016/j.matdes.2011.09.004
15.
EdwardsP. and RamuluM.: ‘Peak Temperatures during Friction Stir Welding of Ti-6Al-4V’, Sci. Technol. Weld. Join., 2010, 15, 468–472. doi: 10.1179/136217110X12665778348425
16.
EdwardsP. and RamuluM.: ‘Effect of process conditions on superplastic forming behavior in titanium 6Al-4V friction stir welds’, Sci. Technol. Weld. Join., 2009, 14, 669–680. doi: 10.1179/136217109X12464549883330
17.
DengY. H., GuanQ., WuB. and TaoJ.: ‘A comparative study on electron beam welding and rigid restraint thermal self-compressing bonding for Ti6Al4V alloy’, Vacuum, 2015, 117, 17–22. doi: 10.1016/j.vacuum.2015.03.035
18.
GaoX. L., ZhangL. J., LiuJ. and ZhangJ. X.: ‘A comparative study of pulsed Nd: YAG laser welding and TIG welding of thin Ti6Al4V titanium alloy plate’, Mater. Sci. Eng. A, 2013, 559, 14–21. doi: 10.1016/j.msea.2012.06.016
19.
AkmanE., DemirA., CanelT. and SınmazçelikT.: ‘Laser welding of Ti6Al4V titanium alloys’, J. Mater. Process. Technol., 2009, 209, 3705–3713. doi: 10.1016/j.jmatprotec.2008.08.026
20.
ZhaoX., ZhangJ., SongX. and GuoW.: ‘Investigation on mechanical properties of laser welded joints for Ti-6Al-4V titanium alloy’, Mater. Sci. Technol., 2013, 29, (12), 1405–1413. doi: 10.1179/1743284713Y.0000000314
21.
GaoX. L., LiuJ., ZhangL. J. and ZhangJ. X.: ‘Effect of the overlapping factor on the microstructure and mechanical properties of pulsed Nd: YAG laser welded Ti6Al4V sheets’, Mater. Charact., 2014, 93, 136–149. doi: 10.1016/j.matchar.2014.04.005
22.
LiuJ., GaoX. L., ZhangL. J. and ZhangJ. X.: ‘Effects of the heterogeneity in the electron beam welded joint on mechanical properties of Ti6Al4V Alloy’, J. Mater. Eng. Perform., 2015, 24, (1), 319–328. doi: 10.1007/s11665-014-1251-x
23.
LuW., LiX. Y., LeiY. P. and ShiY. W.: ‘Study on the mechanical heterogeneity of electron beam welded thick TC4-DT joints’, Mater. Sci. Eng. A, 2012, 540, 135–141. doi: 10.1016/j.msea.2012.01.117
24.
YungK. C. W., RalphB., LeeW. B. and FennR.: ‘An investigation into welding parameters affecting the tensile properties of titanium welds’, J. Mater. Process. Technol., 1997, 63, 759–764. doi: 10.1016/S0924-0136(96)02719-7
25.
ZengL. and BielerT. R.: ‘Effects of working, heat treatment, and aging on microstructural evolution and crystallographic texture of α, α′, α″ and β phases in Ti-6Al-4V wire’, Mater. Sci. Eng. A, 2005, 392, 403–414. doi: 10.1016/j.msea.2004.09.072
26.
XieP., ZhaoH. Y., WuB., and SlG.: ‘Using finite element and contour method to evaluate residual stress in thick Ti-6Al-4V alloy welded by electron beam welding’, Acta Metall. Sin., 2015, 28, (7), 922–930. doi: 10.1007/s40195-015-0276-y
27.
ZhengX. G. and ZhaoY.: ‘The research on narrow-gap TIG welding of titanium alloys’, Titanium Indus. Prog., 2006, 23, (5), 40–43.
28.
QiY. L., DengJ., HongQ. and ZengL. Y.: ‘Electron beam welding, laser beam welding and gas tungsten arc welding of titanium sheet’, Mater. Sci. Eng. A, 2000, 280, 177–181. doi: 10.1016/S0921-5093(99)00662-0
