The tensile properties of two X70 steels with high (1.14 wt-) and medium (0.5 wt-) Mn contents have been investigated by testing at 25°C of tubular specimens charged with an internal gas pressure of 10 MPa of hydrogen or argon. The hydrogen-charged samples were additionally tested at 50 and 100°C. Tensile testing showed that the equiaxed ferrite–pearlite microstructure of higher Mn steel was most sensitive to hydrogen embrittlement and that the banded ferrite–pearlite microstructure of the higher Mn strip was more susceptible to hydrogen embrittlement than the medium Mn strip. The more highly banded ferrite–pearlite microstructure in the higher Mn steel provided numerous sites for concentration of hydrogen to levels that promoted crack initiation and growth. Test temperatures up to 100°C reduced the yield and tensile strengths, increased the total elongation and decreased the extent of hydrogen embrittlement because of enhanced dislocation mobility and less effective hydrogen trapping.
WilliamsJ. G.: ‘Advances in steels for high strength ERW linepipe application in Australia’, Mater. Forum, 2007, 31, 1–10.
2.
DongC. F., LiX. G., LiuZ. Y. and ZhangY. R.: ‘Hydrogen-induced cracking and healing behaviour of X70 steel’, J. Alloys Compd., 2009, 484, 966–972.
3.
HuangF., LiuJ., DengZ. J., ChengJ. H., LuZ. H. and LiX. G.: ‘Effect of microstructure and inclusions on hydrogen induced cracking susceptibility and hydrogen trapping efficiency of X120 pipeline steel’, Mater. Sci. Eng. A, 2010, 527, 6997–7001.
4.
DongC. F., LiuZ. Y., LiX. G. and ChengY. F.: ‘Effects of hydrogen-charging on the susceptibility of X100 pipeline steel to hydrogen-induced cracking’, Int. J. Hydrogen Energy, 2009, 34, 9879–9884.
5.
YenS. K. and HuangI. B.: ‘Critical hydrogen concentration for hydrogen-induced blistering on AISI 430 stainless steel’, Mater. Chem. Phys., 2003, 80, 662–666.
6.
CarneiroR. A., RatnapuliR. C. and de Freitas Cunha LinsV.: ‘The influence of chemical composition and microstructure of API linepipe steels on hydrogen induced cracking and sulfide stress corrosion cracking’, Mater. Sci. Eng. A, 2003, 357, 104–110.
7.
ThompsonA. W. and BernsteinI. M.: ‘The role of metallurgical variables in hydrogen-assisted environmental fracture’, in ‘Advances in corrosion science and technology’, (ed. M. G. Fontana and R. W. Staettle), 53–175; 1980, Springer.
8.
ChatzidourosE. V., PapazoglouV. J., TsiourvaT. E. and PantelisD. I.: ‘Hydrogen effect on fracture toughness of pipeline steel welds, with in situ hydrogen charging’, Int. J. Hydrogen Energy, 2011, 36, 12626–12643.
9.
NakaiY., KurahashiH., EmiT. and HaidaO.: ‘Development of steels resistant to hydrogen induced cracking in wet hydrogen sulfide environment’, Transactions of the Iron and Steel Institute of Japan, 1979, 19, 401–410.
10.
RenX., ChuW. Y., LiJ., SuY. J. and QiaoL.: ‘The effects of inclusions and second phase particles on hydrogen-induced blistering in iron’, Mater. Chem. Phys., 2008, 107, 231–235.
11.
WilliamsJ. G.: ‘New alloy design perspectives for high strength steels’ in Proc. Int. Conf. ‘Thermomechanical processing of steels on CD’, Padua, Italy, 2008.
12.
WilliamsR. S. and HomerbergV. O.: ‘Principles of metallography’, Metallurgy and metallurgical engineering series, 319; 1948, New York, McGraw-Hill Book Co., Inc.
13.
ASTM E562-11 ‘Standard test method for determining volume fraction by systematic manual point count’ in Book of Standards, 03.01, 2011, West Conshohocken, PA, ASTM International.
14.
ASTM E112-10 ‘Standard test methods for determining average grain size’, 2010, West Conshohocken, PA, ASTM International.
15.
OldenV., AlvaroA. and AkselsenO. M.: ‘Hydrogen diffusion and hydrogen influenced critical stress intensity in an API X70 pipeline steel welded joint – experiments and FE simulations’, Int. J. Hydrogen Energy, 2012, 37, 11474–11486.
16.
Al ShahraniA., SchambronT., Dehghan-ManshadiA., WilliamsJ. G. and PerelomaE. V.: ‘Effects of processing parameters on microstructure development in X70 pipeline steel’, Mater. Sci. Forum, 2010, 654, 98–301.
17.
HwangB., KimY. G., LeeS. G., KimY. M., KimN. J. and YooJ. Y.: ‘Effective grain size and Charpy impact properties of high-toughness X70 pipeline steels’, Metall. Mater. Trans. A, 2005, 36, 2107–2114.
18.
DieterG. E. and BaconD.: ‘Mechanical metallurgy’, 1986, New York, McGraw-Hill.
19.
ChangT. L., TsayL. W. and ChenC.: ‘Influence of gaseous hydrogen on the notched tensile strength of D6ac steel’, Mater. Sci. Eng. A, 2001, 316, 153–160.
20.
MichlerT. and NaumannJ.: ‘Hydrogen embrittlement of Cr–Mn–N-austenitic stainless steels’, Int. J. Hydrogen Energy, 2010, 35, 1485–1492.
21.
AfrinN., ChenD. L., CaoX. and JahaziM.: ‘Strain hardening behavior of a friction stir welded magnesium alloy’, Scripta Materialia, 2007, 57, 1004–1007.
22.
LuoJ., MeiZ., TianW. and WangZ.: ‘Diminishing of work hardening in electroformed polycrystalline copper with nano-sized and μg-sized twins’, Mater. Sci. Eng. A, 2006, 441, 282–290.
23.
HofmannW. and RaulsW.: ‘Ductility of steel under the influence of external high pressure hydrogen (hydrogen embrittlement of plain steel and Armco iron)’, Welding J., Res. Suppl., 1965, 44, 225-S–230-S.
24.
WuX., KatadaY., KimI. S. and LeeS. G.: ‘Hydrogen-involved tensile and cyclic deformation behavior of low-alloy pressure vessel steel’, Metall. Mater. Trans. A, 2004, 35, 1477–1486.
25.
MichlerT., YukhimchukA. A. and NaumannJ.: ‘Hydrogen environment embrittlement testing at low temperatures and high pressures’, Corrosion Sci., 2008, 50, 3519–3526.
26.
SenkovO. N. and JonasJ. J.: ‘Dynamic strain aging and hydrogen-induced softening in alpha titanium’, Metall. Mater. Trans. A, 1996, 27, 1877–1887.
27.
HejaziD., HaqA. J., YazdipourN., DunneD. P., CalkaA., BarbaroF. and PerelomaE. V.: ‘Effect of manganese content and microstructure on the susceptibility of X70 pipeline steel to hydrogen cracking‘, Mater. Sci. Eng. A, 2012, 551, 40–49.
28.
LeeY. H., LeeH. M., KimY. and NahmS. H.: ‘Mechanical degradation of API X65 pipeline steel by exposure to hydrogen gas’, Metals Mater. Int., 2011, 17, 389–395.
29.
HaqA. J., MuzakaK., DunneD. P., CalkaA., PerelomaE. V.: ‘Effect of microstructure and composition on hydrogen permeation in X70 pipeline steels‘, Int. J. Hydrogen Energy, 2013, 38, (5), 2544–2556.
30.
BeachemC. D.: ‘A new model for hydrogen-assisted cracking (Hydrogen embrittlement)’, Metall. Trans. A, 1972, 3, 437–451.
31.
DeimelP. and SattlerE.: ‘Austenitic steels of different composition in liquid and gaseous hydrogen’, Corros. Sci., 2008, 50, 1598–1607.
32.
FrickeE., StüweH. P. and VibransG.: ‘Dissolution of hydrogen from the gas in steel at room temperature’, Metall. Trans., 1971, 2, 2697–2700.
33.
GrongO.: ‘Metallurgical modelling of welding’ Materials Modelling Series, 509–512; 1994, London, The Institute of Materials.
34.
HardieD., CharlesE. A. and LopezA. H.: ‘Hydrogen embrittlement of high strength pipeline steel’, Corrosion Sci., 2006, 48, 4378–4385.
35.
LeeH. L. and Lap-Ip ChanS.: ‘Hydrogen embrittlement of AISI 4130 steel with an alternate ferrite/pearlite banded structure’, Mater. Sci. Eng. A, 1991, 142, 193–201.
36.
TauL. and ChanS. L. I.: ‘Effects of ferrite/pearlite alignment on the hydrogen permeation in a AISI 4130 steel’, Mater. Lett., 1996, 29, 143–147.
37.
DomizziG., AnteriG. and Ovejero-GarciaJ.: ‘Influence of sulphur content and inclusion distribution on the hydrogen induced blister cracking in pressure vessel and pipeline steels’, Corrosion Sci., 2001, 43, 325–339.
