The solid structure and thermophysical properties of three electroslag remelting (ESR) slags were characterised. Samples from ESR trials performed by Special Metals Corporation in Burnaugh, KY, were compared to samples solidified in a vacuum induction melter. The microstructures were characterised using a combination of optical and electron microscopy, X-ray diffraction, energy-dispersive spectroscopy and a serial sectioning technique to quantify porosity. The thermophysical properties were measured using differential scanning calorimetry and laser flash diffusivity testing at Thermophysical Property Measurement Laboratory, Inc. in West Lafayette, IN. The two processing routes were found to produce similar phase fractions, but resulted in different properties as a function of phase morphology and porosity content. These results suggest that future modelling and property measurement efforts must account for both the structure and composition of the slags.
FeziK., YankeJ. and KraneM. J. M.: ‘Macrosegregation during electroslag remelting of alloy 625’, Metall. Mater. Trans. B, 2014, 46, 766–779. doi: 10.1007/s11663-014-0254-1
2.
MitchellA. and JoshiS.: ‘Some observations on the electrical and thermal properties of the slag-skin region in the electroslag remelting process’, Metall. Trans., 1971, 2, 449–455. doi: 10.1007/BF02663333
3.
BallantyneA. S. and MitchellA.: ‘Modelling of ingot thermal fields in consumable electrode remelting processes’, Ironmak. Steelmak., 1977, 4, 222–239.
4.
SathayeJ. M.: ‘Aspects of mould design in electroslag casting’, M.S. thesis, University of British Columbia, 1977.
5.
KelkarK. M., PatankarS. V. and MitchellA.: ‘Computational modeling of the electroslag remelting (ESR) process used for the production of ingots of high-performance alloys’, Proc. Int. Symp. on ‘Liq. Met. Process. Cast.’, 2005, 137–144.
6.
KharichaA., MackenbrockA., LudwigA., SchutzenhoferW. and MaronnierV.: ‘Selected numerical investigations on ESR process’, Proc. Int. Symp. on ‘Liq. Met. Process. Cast.’, 2007, 113–120.
7.
WeberV., JardyA., DussoubsB., AblitzerD., RyberonS., SchmittV., HansS. and PoissonH.: ‘A comprehensive model of the electroslag remelting process: description and validation’, Metall. Mater. Trans. B, 2009, 40, 271–280. doi: 10.1007/s11663-008-9208-9
8.
KelkarK., PatankarS., SrivatsaS., MinisandramR., EvansD., DeBarbadilloJ., SmithR., HelminkR., MitchellA. and SizekH.: ‘Computational modeling of electroslag remelting (ESR) process used for the production of high-performance alloys’, Proc. Int. Symp. on ‘Liq. Met. Process. Cast.’, 2013, 3–12.
9.
YankeJ., FeziK., TriceR. and KraneM. J. M.: ‘Simulation of slag-skin formation in electroslag remelting using a volume-of-fluid-method’, Numer. Heat Transf. Part A: Appl., 2014, 67, 268–292. doi: 10.1080/10407782.2014.937208
10.
KharichaA., LudwigA. and WuM.: ‘On melting of electrodes during electro-slag remelting’, ISIJ Int., 2014, 54, 1621–1628. doi: 10.2355/isijinternational.54.1621
11.
MillsK., PowellJ., BryantJ. and KeeneB.: ‘The thermal properties of slags based on CaF2’, Can Metall. Quart., 1981, 20, 93–99. doi: 10.1179/cmq.1981.20.1.93
12.
KeeneB. and MillsK.: ‘Total normal emissivity of slags used in electroslag remelting’, Arch. Fur Das Eisenhuttenwes., 1981, 52, 311–315.
13.
GohilD. and MillsK.: ‘The heat capacity and enthalpy of fusion of slags used in electroslag remelting’, Arch. Fur Das Eisenhuttenwes., 1981, 52, 335–340.
14.
MorellR. and MillsK.: ‘The thermal expansion of slags used in electroslag remelting’, Arch. Fur Das Eisenhuttenwes., 1981, 52, 381–383.
15.
TaylorR. and MillsK.: ‘The thermal conductivity of slags used in electroslag remelting’, Arch. Fur Das Eisenhuttenwes., 1981, 52, 55–63.
16.
DongY., JiangZ., CaoY., HouD., LiangL. and DuanJ.: ‘Effective thermal conductivity of slag crust for ESR slag’, ISIJ Int., 2015, 55, 904–906. doi: 10.2355/isijinternational.55.904
17.
BuschJ. D.: ‘Flux entrapment and titanium nitride defects during electroslag remelting’, M.S. thesis, Purdue University, 2012.
18.
RietveldH.: ‘Line profiles of neutron powder-diffraction peaks for structure refinement’, Acta Crystallogr., 1967, 22, 151–152. doi: 10.1107/S0365110X67000234
19.
BishD. and HowardS.: ‘Quantitative phase analysis using the Rietveld method’, J. Appl. Crystallogr., 1988, 21, 86–91. doi: 10.1107/S0021889887009415
20.
LutterottiL., MatthiesS. and WenkH.: ‘MAUD: a friendly Java program for material analysis using diffraction’, IUCr Newsl. CPD, 1999, 21, 14–15.
21.
GrazulisS., ChateignerD., DownsR., YokochiA., QuirosM., LutterottiL., ManakovaE., ButkusJ., MoeckP. and Le BailA.: ‘Crystallography Open Database – an open-access collection of crystal structures’, J. Appl. Crystallogr., 2009, 42, 726–729. doi: 10.1107/S0021889809016690
22.
GrazulisS., DaskevicA., MerkysA., ChateignerD., LutterottiL., QuirosM., SerebryanayaN., MoeckP., DownsR. and Le BailA.: ‘Crystallography Open Database (COD): an open-access collection of crystal structures and platform for world-wide collaboration’, Nucleic Acids Res., 2012, 40, D420–D427. doi: 10.1093/nar/gkr900
23.
BergerhoffG. and BrownI.: ‘Crystallographic databases’, (ed. AllenF.H., BergerhoffG. and SieversR.); 1987, Chester, International Union of Crystallography.
24.
BelskyA., HellenbrandtM., KarenV. and LukshP.: ‘New developments in the Inorganic Crystal Structure Database (ICSD): accessibility in support of materials research and design’, Acta Crystallogr. Sect. B Struct. Sci., 2002, 58, 364–369. doi: 10.1107/S0108768102006948
25.
AbsiJ., SmithD., Nait-AliB., GrandjeanS. and BerjonnauxJ.: ‘Thermal response of two-layer systems: numerical simulation and experimental validation’, J. Eur. Ceram. Soc., 2005, 25, 367–373.
26.
DantzigJ. and RappazM.: ‘Solidification’, 2009, Boca Raton, FL, CRC Press.
