The present study is concerned with thermal and mechanical stability of retained austenite (RA) obtained in high-carbon, high-silicon steels after quenching and tempering. Through the investigation of three different alloy compositions with Si content of ∼0.3, 0.6 and 1.2 wt-%, it is shown that increasing silicon dramatically increases thermal stability. Compression tests on quenched and tempered specimens indicate that RA was also mechanically more stable when present in higher silicon steels.
This paper is part of a Themed Issue on Recent developments in bearing steels.
BhadeshiaH. K. D. H.: ‘Steels for bearings’, Prog. Mater. Sci., 2012, 57, 268–435. doi: 10.1016/j.pmatsci.2011.06.002
2.
BaudryG., BellusJ., GirodinD., DudragneG. and JacobG.: ‘Steel for making a ball bearing part’, European Patent EP 1 114 199 B1, 9 October 2002.
3.
BaudryG., BellusJ., GirodinD., JacobG., VincentA. and LormandG.: ‘Steel and process for the manufacture of a part for ball bearing’, European Patent EP 0 972 090 B1, 28 September 2005.
4.
Cercueil-SareteH.: ‘Etude d'une nouvelle nuance d'acier à roulement pour conditions d'usage sévères et modélisation de son endommagement en présence d'une indentation’, PhD thesis, INSA Lyon,
France, 1999.
5.
DaguierP., BaudryG., BellusJ., AuclairG., Rofès-VernisJ., DudragneG., GirodinD. and JacobG.: ‘Improved Bearing Steel for applications involving debris, higher loads and temperatures’, ASTM STP 1419, 2002.
6.
SidoroffC., PerezM., DierickxP. and GirodinD.: ‘Advantages and shortcomings of retained austenite in bearing steels: a review’, in ‘Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings’, (ed. BeswickJ. M.), 1–37; 2014, ASTM International.
7.
SourmailT. and SmanioV.: ‘Low temperature kinetics of bainite formation in high carbon steels’, Acta Mater., 2013, 61, 2639–2648. doi: 10.1016/j.actamat.2013.01.044
8.
LuzginovaN. V., ZhaoL. and SietsmaJ.: ‘The cementite spheroidization process in high-carbon steels with different chromium contents’, Metall. Mater. Trans. A, 2008, 39, 513–521. doi: 10.1007/s11661-007-9403-3
9.
KimK.-H., LeeJ.-S. and LeeD. L.: ‘Effect of silicon on the spheroidization of cementite in hypereutectoid high carbon chromium bearing steels’, Metals Mater. Int., 2010, 16, 871–876. doi: 10.1007/s12540-010-1203-4
10.
SourmailT. and Garcia-MateoC.: ‘A model for predicting the M s temperatures of steels’, Comput. Mater. Sci., 2005, 34, 323–334. doi: 10.1016/j.commatsci.2005.01.002
11.
SourmailT., MéheuxM. and AuclairG.: ‘Comments on ‘On microstructure and properties of Si modified 100Cr6 bearing steels’ by Kim and Lee, with a response by the authors’, Mater. Sci. Technol., 2012, 28, 1368. doi: 10.1179/0267083612Z.000000000176
12.
KoistinenD. P. and MarburgerR. E.: ‘A general equation describing the extent of the austenite–martensite transformation in pure iron–carbon alloys and plain carbon steels’, Acta Metall., 2012, 7, 59–60. doi: 10.1016/0001-6160(59)90170-1
13.
CaballeroF., BhadeshiaH. K. D. H., MawellaK. J. A., JonesD. G. and BrownP.: ‘Very strong low temperature bainite’, Mater. Sci. Technol., 2002, 18, 279–284. doi: 10.1179/026708301225000725
14.
CaballeroF. and BhadeshiaH. K. D. H.: ‘Very strong bainite’, Curr. Opin. Solid State Mater. Sci., 2004, 8, 251–257. doi: 10.1016/j.cossms.2004.09.005
15.
Garcia-MateoC., CaballeroF. G. and BhadeshiaH. K. D. H.: ‘Low temperature bainite’, J. Phys. IV, 2003, 112, 285–288.
16.
Sourmail:T.RFCS contract RFSR-CT-2008–00022 ‘NANOBAIN’, Final Report; 2012.
17.
ClarkeA.J., MillerM. K., AlexanderD. J., FieldR. D. and ClarkeK. D.: ‘Atom probe tomography examination of carbon redistribution in quenched and tempered 4340 steel’, Acta Mater., 2014, 77, 17–27. doi: 10.1016/j.actamat.2014.05.032
18.
Garcia-MateoC., JimenezJ. A., YenH.-W., MillerM. K., Morales-RivasL., KuntzM., RingerS. P., YangJ.-R. and CaballeroF. G.: ‘Low temperature bainitic ferrite: evidence of carbon super-saturation and tetragonality’, Acta Mater., 2015, 91, 162–173. doi: 10.1016/j.actamat.2015.03.018
19.
Garcia-MateoC., CaballeroF. G. and BhadeshiaH. K. D. H.: ‘Development of hard bainite’, ISIJ Int., 2003, 43, 1238–1243. doi: 10.2355/isijinternational.43.1238
20.
SourmailT., SmanioV. and AuclairG.: ‘Kinetics of bainite formation in 100Cr6 and similar high-carbon steel grades’, Bearing Steel Technologies, 10th Vol., ASTM Inter. STP1580, 2015.
21.
TobataJ., Ngo-HuynhK.-L., NakadaN., TsuchiyamaT. and TakakiS.: ‘Role of silicon in quenching and partitioning treatment of low-carbon martensitic stainless steel’, ISIJ Int., 2012, 52, 1377–1382. doi: 10.2355/isijinternational.52.1377
