In this research work, the effect of Fe additions on the phase evolution, microstructure, chemical composition, transformation behaviour and properties of Ni(50−X)Ti50FeX shape memory alloys has been investigated. The elemental Ti, Ni and Fe mixed powders are compacted at 600 MPa, followed by sintering at 1100°C for 4hr in an Ar atmosphere. Phase analysis and microstructural studies confirmed the presence of the NiTi phase besides other Ni-rich and Ti-rich phases. The 8at.-% Fe sample shows higher relative density, lower porosity, higher hardness, higher elastic modulus and higher wear resistance owing to the presence of a higher amount of secondary intermetallic phases compared to other composition samples. Interestingly, the 4at.-% Fe sample has a higher percentage of NiTi (B19’) phase and shows a better shape memory effect and elastic recovery than other composition samples. FESEM morphology of worn surface explained various wear mechanisms with respect to shape memory behaviour.
QinQ, WenY, WangG, . Effects of solution and aging treatments on corrosion resistance of As-cast 60NiTi alloy. J Mater Eng Perform. 2016;25(12):5167–5172. doi:10.1007/s11665-016-2402-z
2.
SevcikovaJ, Pavkova GoldbergovaM. Biocompatibility of NiTi alloys in the cell behaviour. BioMetals. 2017;30(2):163–169. doi:10.1007/s10534-017-0002-5
DolceM, CardoneD, Mechanical behaviour of shape memory alloys for seismic applications 2. austenite NiTi wires subjected to tension. Int J Mech Sci. 2001;43(11):2657–2677. doi:10.1016/S0020-7403(01)00050-9
5.
SaadatS.An overview of vibration and seismic applications of NiTi shape memory alloy. Smart Mater Struct. 2002;11(2):218–229. doi:10.1088/0964-1726/11/2/305
6.
WangL, WangC, ZhangLC, . Phase transformation and deformation behavior of NiTi-Nb eutectic joined NiTi wires. Sci Rep. 2016;6(1):23905. doi:10.1038/srep23905
7.
HsiehSF, ChenSL, LinHC, . A study of TiNiCr ternary shape memory alloys. J Alloys Compd. 2010;494(1–2):155–160. doi:10.1016/j.jallcom.2010.01.052
8.
LiY, KangX, YinX, . Microstructure and mechanical properties of cold-rolled Ti50Ni47Fe3 shape memory alloy. Trans Nonferrous Met Soc China. 2014;24(9):2890–2895. doi:10.1016/S1003-6326(14)63423-3
9.
HuangTS, OuSF, KuoCH, . Effects of thermomechanical treatment on phase transformation of the Ti50Ni49W1 shape memory alloy. Metals (Basel). 2020;10(4):527. doi:10.3390/met10040527
10.
KolomytsevVI.The effect of alloying by 3d, 4d, 5d transition metal klements on martensite transformation temperatures in compound TiNi. Scr Metall Mater. 1994;31(10):1415–1420. doi:10.1016/0956-716X(94)90128-7
11.
EdmondsKR, HwangCM.Phase transformations in ternary TiNix alloys. Scr Metall. 1986;20(5):733–737. doi:10.1016/0036-9748(86)90501-6
12.
HwangCM, WaymanCM.Phase transformations in TiNiFe, TiNiAl and TiNi alloys. Scr Metall. 1983;17(11):1345–1350. doi:10.1016/0036-9748(83)90230-2
13.
BramM, Ahmad-KhanlouA, HeckmannA, . Powder metallurgical fabrication processes for NiTi shape memory alloy parts. Mater Sci Eng A. 2002;337(1–2):254–263. doi:10.1016/S0921-5093(02)00028-X
14.
KlementováM, KarlíkM, NovákP, . Structure determination of a new phase Ni 8 Ti 5 by electron diffraction tomography. Intermetallics. 2017;85:110–116. doi:10.1016/j.intermet.2017.02.003
15.
MonogenovAA.Structure and properties of porous alloys based on NiTi doped by Al, fabricated by SHS-method. KnE Mater Sci. 2017;2(1):62. doi:10.18502/kms.v2i1.781
16.
VelmuruganC, SenthilkumarV.Optimization of spark plasma sintering parameters for NiTiCu shape memory alloys. Mater Manuf Processes. 2019;34(4):369–378. doi:10.1080/10426914.2018.1512118
17.
KyogokuH, TerayamaA.Study on development of Ti-based shape memory alloys using pulse current sintering. J Jpn Soc Powder Powder Metall. 2011;58(1):50–56. doi:10.2497/jjspm.58.50
18.
DuerigT, PeltonA, StöckelD, . An overview of nitinol medical applications. Mater Sci Eng A. 1999;273–275:149–160. doi:10.1016/S0921-5093(99)00294-4.
19.
AminiR, AlijaniF, GhaffariM, . Formation of B19′, B2, and amorphous phases during mechano-synthesis of nanocrystalline NiTi intermetallics. Powder Technol. 2014;253:797–802. doi:10.1016/j.powtec.2013.12.029
20.
SpeirsM.On the transformation behavior of NiTi shape-memory alloy produced by SLM. Shape Mem Superelasticity. 2016;2(4):310–316. doi:10.1007/s40830-016-0083-y
21.
LuHZ, MaHW, CaiWS, LuoX, WangZ, SongCH, YangC, . Stable tensile recovery strain induced by a Ni4Ti3 nanoprecipitate in a Ni50.4Ti49.6 shape memory alloy fabricated via selective laser melting. Acta Mater. 2021; 219: 117261. doi:10.1016/j.actamat.2021.117261
22.
LuHZ, LiuLH, YangC, . Simultaneous enhancement of mechanical and shape memory properties by heat-treatment homogenization of Ti2Ni precipitates in TiNi shape memory alloy fabricated by selective laser melting. J Mater Sci Technol. 2022;101:205–216. doi:10.1016/j.jmst.2021.06.019
23.
SergeyA, ValentinaH, TimofeyC, VictorG, Ji-hoonK, Ji-soonK, . Fabrication and study of double sintered TiNi-based porous alloys. Smart Mater Struct. 2017;26(5):0057001. doi:10.1088/1361-665X/aa681a
24.
KomarovVV.A review of radio frequency and microwave sustainability-oriented technologies. Sustain Mater Technol. 2021;28:e00234. doi:10.1016/j.susmat.2020.e00234.
25.
KarlíkM.TEM phase analysis of NiTi shape memory alloy prepared by self-propagating high-temperature synthesis. Adv Mater Process Technol. 2017;3(1):58–69. doi:10.1080/2374068X.2016.1247338.
26.
CaiWS, LuHZ, LiHZ, . Microstructural evolution and superelastic properties of ultrafine-grained NiTi-based shape memory alloy via sintering of amorphous ribbon precursor. J Mater Sci Tech. 2023;138:80–92. doi:10.1016/j.jmst.2022.08.011.
27.
IsmailMH, RazaliR, AbdullahZ, . Shape memory behaviour of NiTi alloy produced by MIM using palm stearin based binder. Adv Mat Res. 2016;1133:295–299. doi:10.4028/www.scientific.net/AMR.1133.295
28.
ShearwoodC, FuYQ, YuL, . Spark plasma sintering of TiNi nano-powder. Scr Mater. 2005;52(6):455–460. doi:10.1016/j.scriptamat.2004.11.010
QianL, SunQ, ZhouZ, . The role of martensite reorientation in the fretting behaviour of nickel titanium shape memory alloy. Proc Inst Mech Eng Part J J Eng Tribol. 2008;222(7):887–897. doi:10.1243/13506501JET427
31.
ClaytonP.Tribological behavior of a titanium-nickel alloy. Wear. 1993;162–164:202–210. doi:10.1016/0043-1648(93)90502-D.
32.
SinghJ, AlpasAT. Dry sliding wear mechanisms in a Ti50Ni47Fe3 intermetallic alloy. Wear. 1995;181–183:302–311.
33.
ZhangC, FarhatZN. Sliding wear of superelastic TiNi alloy. Wear. 2009;267(1–4):394–400. doi:10.1016/j.wear.2008.12.093
34.
LiuP, KanQ, YinH, . Effect of grain size on wear resistance of nanocrystalline NiTi shape memory alloy. Mater Lett. 2019;241:43–46. doi:10.1016/j.matlet.2019.01.025
35.
OliverWC, PharrGM. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7(6):1564–1583. doi:10.1557/JMR.1992.1564
36.
BerthevilleB, NeudenbergerM, BidauxJE, . Powder sintering and shape-memory behaviour of NiTi compacts synthesized from Ni and TiH2. Mater Sci Eng A. 2004;384(1–2):143–150. doi:10.1016/S0921-5093(04)00837-8
37.
KhanlariK, RamezaniM, KellyP, . Comparison of the reciprocating sliding wear of 58Ni39Ti-3Hf alloy and baseline 60NiTi. Wear. 2018;408–409:120–130. doi:10.1016/0043-1648(70)90237-1.
38.
De KeyzerJ.. Thermodynamic modeling of the Fe-Ni-Ti system: a multiple sublattice approach. 2008.
39.
TangCY, ZhangLN, WongCT, . Fabrication and characteristics of porous NiTi shape memory alloy synthesized by microwave sintering. Mater Sci Eng A. 2011;528(18):6006–6011. doi:10.1016/j.msea.2011.04.040
40.
WhitneyM, CorbinSF, GorbetRB, . Investigation of the mechanisms of reactive sintering and combustion synthesis of NiTi using differential scanning calorimetry and microstructural analysis. Acta Mater. 2008;56(3):559–570. doi:10.1016/j.actamat.2007.10.012
41.
HornbuckleC, YuB, NoebeXX, . Hardening behavior and phase decomposition in very Ni-rich nitinol alloys. Mater Sci Eng A. 2015;639:336–344. doi:10.1016/j.msea.2015.04.079
42.
LeeJ, HwangJ, LeeD, . Enhanced mechanical properties of spark plasma sintered NiTi composites reinforced with carbon nanotubes. J Alloys Compd. 2014;617:505–510. doi:10.1016/j.jallcom.2014.08.091
43.
ZhangY, ChengX, CaiH, . Fabrication, characterization and tensile property of a novel Ti2Ni/TiNi micro-laminated composite. Mater Des. 2016;92:486–493. doi:10.1016/j.matdes.2015.12.014
44.
ZhangJ.In situ synchrotron X-ray diffraction study of deformation behavior and load transfer in a Ti2Ni-NiTi composite. Appl Phys Lett. 2014;105(4):041910. doi:10.1063/1.4892352
45.
WuS.Wear mechanism and tribological characteristics of porous NiTi shape memory alloy for bone scaffold. J Biomed Mater Res A; 2013;101A(9):2586–2601. doi:10.1002/jbm.a.34568
46.
Godinez-MaderaMA.Nanoindentation and tribological properties of Ni51Ti49−xTax (x < 5 at. %) alloys fabricated by arc melting<5 at.%) alloys fabricated by arc melting. Mater Lett2021;284:129010. doi:10.1016/j.matlet.2020.129010
47.
FarviziM.Effect of starting materials on the wear performance of NiTi-based composites. Wear. 2015;334–335:35–43. doi:10.1016/j.wear.2015.04.011.
48.
GaoF, WangHM.Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy. Intermetallics. 2008;16(2):202–208. doi:10.1016/j.intermet.2007.09.008
49.
ParidaJ, MishraSC, BeheraA, . Synthesis and characterization of Ti50Ni(50−X)FeX alloy produced by mechanical alloying and pressure-less sintering. Met Mater Int. 2022. doi:10.1007/s12540-022-01277-7.
50.
WaqarS, WadoodA, MateenA, . Effects of Ni and Cr addition on the wear performance of NiTi alloy. Int J Adv Manuf Technol. 2020;108(3):625–634. doi:10.1007/s00170-020-05380-0
51.
NeupaneR.Indentation and wear behavior of superelastic TiNi shape memory alloy. Nova Scotia: Dalhousie University Halifax; 2014.
