In this study, powder metallurgical steel samples containing 1.5% C by weight were produced by sintering in a vacuum atmosphere at 1200°C. The impact test and dry sliding wear test specimens were prepared in accordance with ISO 5754 and ASTM G-99 standards, respectively. The wear and impact toughness properties of spherical cementite in the bainitic matrix (SCBM) microstructured specimens produced with different heat treatment routes were compared with pearlite plus primary cementite, fully tempered martensitic, fully bainitic and spherical cementite microstructured specimens in ferritic matrix (SCFM). Microstructural characterisations of all specimens were performed by SEM, EBSD and XRD analyses methods. Compared to fully tempered martensitic and fully bainitic microstructured specimens with similar hardness, both the dry sliding wear and the impact toughness properties of the specimens having SCBM microstructures were improved with the increased austempering time after spheroidisation treatment.
SalmanS, FındıkF, TopuzP.Effects of various austempering temperatures on fatigue properties in ductile iron. Mater Des. 2007;28(7):2210–2214. https://doi.org/10.1016/j.matdes.2006.06.017
2.
BouazizO, ZurobH, HuangM.Driving force and logic of development of advanced high strength steels for automotive applications. Steel Res Int. 2013;84(10):937–947. https://doi.org/10.1002/srin.201200288
3.
GüralA, AltuntaşO.Improving the impact toughness properties of high carbon powder metallurgy steels with novel spherical cementite in the bainitic matrix (SCBM) microstructures. Mater Chem Phys. 2020: 124203. https://doi.org/10.1016/j.matchemphys.2020.124203
4.
ÇakıroğluR, GünayM.Comprehensive analysis of material removal rate, tool wear and surface roughness in electrical discharge turning of L2 tool steel. J Mater Res Technol. 2020;9(4):7305–7317. https://doi.org/10.1016/j.jmrt.2020.04.060
5.
SkoglundP, LitstromO, FlodinA. Improvement of powder metallurgy gears for engines and transmissions. No. 2013-32-9102. SAE Technical Paper, 2013. https://doi.org/10.4271/2013-32-9102
6.
RamakrishnanP.Automotive applications of powder metallurgy. In: Advances in powder metallurgy. Bombay: Indian Institute of Technology Bombay; 2013. p. 493–519. https://doi.org/10.1533/9780857098900.4.493
7.
GülsoyHÖ, KemalBM, YahyaB, Enhancing the wear properties of iron based powder metallurgy alloys by boron additions. Mater Des. 2007;28(7):2255–2259. https://doi.org/10.1016/j.matdes.2006.05.022
8.
DanningerH, GierlC.Powder metallurgy steels for highly loaded precision parts. Int J Mater Prod Technol. 2007;28(3–4):338–360. https://doi.org/10.1504/IJMPT.2007.013084
9.
DanningerH, DlapkaM.Heat treatment of sintered steels – what is different?HTM J Heat Treat. Mater. 2018;73(3):117–130. https://doi.org/10.3139/105.110353
10.
BaraniAA, LiF, RomanoP, Design of high-strength steels by microalloying and thermomechanical treatment. Mater Sci Eng A. 2007;463(1–2):138–146. https://doi.org/10.1016/j.msea.2006.08.124
11.
ZhongN, WangXD, WangL, Enhancement of the mechanical properties of a Nb-microalloyed advanced high-strength steel treated by quenching–partitioning–tempering process. Mater Sci Eng A. 2009;506(1–2):111–116. https://doi.org/10.1016/j.msea.2008.11.014
12.
DelincéM, BréchetY, EmburyJD, Structure–property optimization of ultrafine-grained dual-phase steels using a microstructure-based strain hardening model. Acta Mater. 2007;55(7):2337–2350. https://doi.org/10.1016/j.actamat.2006.11.029
13.
BergmanO, ChasoglouD, DahlströmM.Mechanical performance of Cr-alloyed PM steel after different sintering and heat treatment operations. Met Powder Rep. 2018;73(1):21–25. https://doi.org/10.1016/j.mprp.2017.01.003
14.
DamonJ, DietrichS, SchulzeV.Implications of carbon, nitrogen and porosity on the γ→α′ martensite phase transformation and resulting hardness in PM-steel astaloy 85Mo. J Mater Res Technol. 2020;9(4):8245–8257. https://doi.org/10.1016/j.jmrt.2020.05.035
15.
BabakhaniA, HaerianA, GhambriM.Effect of heat treatment, lubricant and sintering temperature on dry sliding wear behavior of medium alloyed chromium PM steels. J Mater Process Technol. 2008;204(1–3):192–198. https://doi.org/10.1016/j.jmatprotec.2007.11.061
16.
AltuntasO, GüralA.Effect of spheroidizing heat treatment on the microstructure, hardness and toughness of high carbon powder metallurgy steel. Met Mater. 2017;55(5):303–310. https://doi.org/10.4149/km20175303
17.
AltuntaşO, GüralA.Designing spherical cementite in bainitic matrix (SCBM) microstructures in high carbon powder metal steels to improve dry sliding wear resistance. Mater Lett. 2019;249:185–188. https://doi.org/10.1016/j.matlet.2019.04.095
18.
TürkmenM, ErdenMA, KarabulutH, The effects of heat treatment on the microstructure and mechanical properties of Nb–V microalloyed powder metallurgy steels. Acta Polonica A. 2019;135(4):834–836. https://doi.org/10.12693/APhysPolA.135.834
19.
GüralA, BostanB, ÖzdemirAT.Heat treatment in two phase region and its effect on microstructure and mechanical strength after welding of a low carbon steel. Mater Des. 2007;28(3):897–903. https://doi.org/10.1016/j.matdes.2005.10.005
20.
Hernandez-SilvaD, MoralesRD.The spheroidization of cementite in a medium carbon steel by means of subcritical and intercritical annealing. ISIJ Int. 1992;32(12):1297–1305. https://doi.org/10.2355/isijinternational.32.1297
21.
LuzginovaNV, ZhaoL, SietsmaJ.The cementite spheroidization process in high-carbon steels with different chromium contents. Metall Mater Trans A. 2008;39(3):513–521. https://doi.org/10.1007/s11661-007-9403-3
22.
KeoughJR, HayrynenKL.Carbidic austempered ductile iron (CADI). Ductile Iron News. 2000;3:840–845.
23.
BayatiH, ElliottR.Effect of microstructural features on the austempering heat treatment processing window. In: A. Roósz, M. Rettenmayr, D. Watring, editors. Materials science forum. Vol. 329. Trans Tech Publications Ltd; 2000. p. 73–78. https://doi.org/10.4028/www.scientific.net/MSF.329-330.73
24.
ShenFS, KraussG.The effect of phosphorous content and proeutectoid carbide distribution on the fracture behavior of 52100 steel. J Heat Treat. 1982;2(3):238–249.
25.
HanX, ZhangZ, RongY, Bainite kinetic transformation of austempered AISI 6150 steel. Mater Res Technol. 2020;9(2):1357–1364. https://doi.org/10.1016/j.jmrt.2019.11.062
26.
TartagliaJM, HayrynenKL.A comparison of fatigue properties of austempered versus quenched and tempered 4340 steel. J Mater Eng Perform. 2012;21(6):1008–1024. https://doi.org/10.1007/s11665-011-9951-y
27.
ArchardJ.Contact and rubbing of flat surfaces. J Appl Phys. 1953;24(8):981–988. https://doi.org/10.1063/1.1721448
28.
ThomsonRC, MillerMK.An atom probe study of cementite precipitation in autotempered martensite in an Fe-Mn-C alloy. Appl Surf Sci. 1996;94:313–319. https://doi.org/10.1016/0169-4332(95)00392-4
29.
ZhangG-H, ChaeJ-Y, KimK-H, Effects of Mn, Si and Cr addition on the dissolution and coarsening of pearlitic cementite during intercritical austenitization in Fe-1mass%C alloy. Mater Charact. 2013;81:56–67. https://doi.org/10.1016/j.matchar.2013.04.007
30.
WeiJ, ZhouY, DongJ, Effect of cementite spheroidization on improving corrosion resistance of pearlitic steel under simulated bottom plate environment of cargo oil tank. Materialia. 2019;6:100316. https://doi.org/10.1016/j.mtla.2019.100316
31.
XieC, LiuZ, HeX, Effect of martensite–austenite constituents on impact toughness of pre-tempered MnNiMo bainitic steel. Mater Charact. 2020;161:110139. https://doi.org/10.1016/j.matchar.2020.110139
