From the outlook of healthcare, economic importance and supply risk, utilisation of raw materials like tungsten, cobalt and nickel should be reduced or replaced with other metals. Nontoxic titanium carbide and iron are the top-of-the-line solution for displacing these materials. Our focus was on conventionally fabricated titanium carbide-based cermets with a chromium ferritic steel binder. To study microstructural evolution, specimens were sintered at different temperatures (600–1500°C). We used a scanning electron microscopy, X-ray diffraction and differential scanning calorimetry to analyse the microstructure and phase formation of the cermets. Our results showed that during the solid and liquid phase sintering of the TiC–FeCr cermet, chromium ferrous complex carbides M7C3 are formed and as a result, chromium content in the binder phase is decreased. Alloying TiC–FeCr cermets with strong carbide formers improves the structural homogeneity of the cermets. Also, mechanical characteristics (hardness, fracture toughness) were evaluated.
MariD, LlanesL.Hardmetals. In: SarinVK, editor. Comprehensive hard materials. Oxford: Elsevier; 2014. p. 3–538.
7.
HumenikMJr, ParikhNM.Cermets: I, fundamental concepts related to micro-structure and physical properties of cermet systems. J Amer Ceram Soc. 1956;39:60–63. doi: 10.1111/j.1151-2916.1956.tb15624.x
8.
KübarseppJ.Production of high chromium alloys TiC-FeCr alloyed with silicon. Powder Metall Met Ceram. 1986;25:410–414. doi: 10.1007/BF00813957
LiJ, LiuQ, ShiR, . Preparation and mechanical properties of Fe3Al(Ti)/TiC composites. J Mater Process Tech. 2008;208:105–110. doi: 10.1016/j.jmatprotec.2007.12.137
11.
KübarseppJ, ReshetnyakH, AnnukaH.Characterization of the serviceability of steel-bonded hardmetals. Int J Refr Met Hard Mater. 1993;12:341–348. doi: 10.1016/0263-4368(93)90024-A
12.
AkhtarF, GuoSJ.Microstructure, mechanical and fretting wear properties of TiC-stainless steel composites. Mater Charact. 2008;59:84–90. doi: 10.1016/j.matchar.2006.10.021
13.
KolnesM, KübarseppJ, ViljusM, . Effect of sintering conditions on microstructure and performance of TiC-FeCrMn cermets. Proc. World PM 2016; Hamburg. 2016.
14.
OnuohaCC, KipourosGJ, FarhatZN, . The effects of metal binder content and carbide grain size on the aqueous corrosion behaviour of TiC-316L stainless steel cermets. Int J Refr Met Hard Mater. 2014;44:129–141. doi: 10.1016/j.ijrmhm.2014.02.002
15.
AlvaredoP, TsipasSA, GordoE.Influence of carbon content on the sinterability of an FeCr matrix cermet reinforced with TiCN. Int J Refr Met Hard Mater. 2013;36:283–288. doi: 10.1016/j.ijrmhm.2012.10.007
16.
OnuohaCC, JinC, FarhatZN, . The effect of TiC grain size and steel binder content on the reciprocating wear behaviour of TiC-316L stainless steel cermets. Wear. 2016;350–351:116–129. doi: 10.1016/j.wear.2016.01.008
JinC, PlucknetKP.Microstructure instability in TiC-316L stainless steel cermets. Int J Refract Met Hard Mater. 2016;58:74–83. doi: 10.1016/j.ijrmhm.2016.03.012
19.
McGuireMF.Metallurgy. In: Stainless steels for design engineers. ASM Int., Ohio; 2008. p. 1–11.
20.
KlarE, SamalPK, Sintering and corrosion resistance. In: Powder Metallurgy Stainless Steels: Processing, Microstructures, and Properties. ASM Int., Ohio; 2007. p. 59–100.
21.
ShatynskiSR.The thermochemistry of transition metal carbides. Oxid Met. 1979;13:105–118. doi: 10.1007/BF00611975
22.
EmamianA, CorbinSF, KhajepourA.In-situ deposition of metal matrix composite in Fe-Ti-C system using laser cladding process. In: Cuppoletti J editor. Metal, Ceramic and Polymeric Composites for Various Uses, InTech; 2011.
JonssonS.Assessment of the Fe-Ti-C system, calculation of the Fe-Ti-N system, and prediction of the solubility limit of Ti(C,N) in liquid Fe. Metall Mater Trans B. 1998;29:371–384. doi: 10.1007/s11663-998-0114-y
PotaninAY, LevashovEA, PogozhevYS, . The features of combustion and structure formation of ceramic materials in the TiC-Ti3POX-CaO system. Ceram Int. 2015;41:8177–8185. doi: 10.1016/j.ceramint.2015.03.036
28.
MohrbacherH.The effects of niobium microalloying in second generation advanced high strength steels. International Steel Technologies Symposium 2008; Taiwan. 2008.
