In this work a traditional high entropy alloy (FeCoNiCrAl) was reinforced by uniformly distributed reactive silicon carbide (SiC) particles by a powder metallurgy synthetic route, using as precursors simply mixed powders or mechanically prealloyed ones. The reactive sintering produced a single isomorphic BCC structure. The sample microstructure resulted equiassic, more homogenous in samples based on prealloyed powders. The instability of SiC in the presence of metal precursors resulted in the formation of more stable carbides and silicides, as well as in carbon diffusion in the high entropy alloy matrix and partially unreacted SiC particles. The formation of these newly formed fine precipitates, as well as the presence of residual SiC were useful to increase the hardness of the alloy.
YehJW, . Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater. 2004;6(5):299–303. doi: 10.1002/adem.200300567
2.
CantorB, . Microstructural development in equiatomic multicomponent alloys. Mater Sci Eng, A. 2004;375–377:213–218. doi: 10.1016/j.msea.2003.10.257
3.
YehJW.Recent progress in high-entropy alloys, annales de chimie. Science des Materiaux (Paris). 2006;31(6):633–648.
4.
LiuL, . Effects of Sn element on microstructure and properties of SnxAl2.5FeCoNiCu multi-component alloys. J Alloys Compd. 2016;654:327–332. doi: 10.1016/j.jallcom.2015.09.093
5.
TangZ, . Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization. Mater Sci Eng A. 2015;647:229–240. doi: 10.1016/j.msea.2015.08.078
6.
PolettiMG, . Development of a new high entropy alloy for wear resistance: FeCoCrNiW0.3 and FeCoCrNiW0.3 + 5 at.% of C. Mater Des. 2017;115:247–254. doi: 10.1016/j.matdes.2016.11.027
7.
WangR, . Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high entropy alloy prepared by direct laser fabrication. J Alloys Compd. 2017;694:971–981. doi: 10.1016/j.jallcom.2016.10.138
8.
SenkovON, . Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys. Intermetallics. 2011;19(5):698–706. doi: 10.1016/j.intermet.2011.01.004
9.
TabachnikovaED, . Mechanical properties of the CoCrFeNiMnVx high entropy alloys in temperature range 4.2–300 K. J Alloys Compd. 2017;698:501–509. doi: 10.1016/j.jallcom.2016.12.154
10.
GludovatzB, . A fracture-resistant high entropy alloy for cryogenic applications. Science. 2014;345:1153–1158. doi: 10.1126/science.1254581
11.
MiracleDB, SenkovON.A critical review of high entropy alloys and related concepts. Acta Mater. 2017;122:448–511. doi: 10.1016/j.actamat.2016.08.081
12.
ZhangY, . Microstructures and properties of high-entropy alloys. Prog. Mat. Sci.2014;61:1–93. doi: 10.1016/j.pmatsci.2013.10.001
13.
JosephJ.Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys. Mater Sci Eng A. 2015;633:184–193. doi: 10.1016/j.msea.2015.02.072
TariqNH, . Effect of W and Zr on structural, thermal and magnetic properties of AlCoCrCuFeNi high entropy alloy. J Alloys Compd. 2013;556:79–85. doi: 10.1016/j.jallcom.2012.12.095
16.
HongSI, . Thermally activated deformation and the rate controlling mechanism in CoCrFeMnNi high entropy alloy. Mat Sci Eng A. 2017;682:569–576. doi: 10.1016/j.msea.2016.11.078
17.
VaralakshmiS, KamarajM, MurtyBS.Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying. Mater Sci Eng A. 2010;527:1027–1030. doi: 10.1016/j.msea.2009.09.019
18.
KatakamS, . Laser assisted high entropy alloy coating on aluminum: microstructural evolution. J Appl Phys. 2014;116:104906/1-104906-6. doi: 10.1063/1.4895137
19.
QiuXW, . Microstructure and corrosion resistance of AlCrFeCuCo high entropy alloy. J Alloys Compd. 2013;549:195–199. doi: 10.1016/j.jallcom.2012.09.091
20.
JiW, Mechanical alloying synthesis and spark plasma sintering consolidation of CoCrFeNiAl high entropy alloy. J Alloys Compd. 2014;589:61–66 doi: 10.1016/j.jallcom.2013.11.146
21.
LiuY, . Preparation of superfine-grained high entropy alloy by spark plasma sintering gas atomized powder. Intermetallics. 2016;68:16–22. doi: 10.1016/j.intermet.2015.08.012
22.
MohantyS, . Powder metallurgical processing of equiatomic AlCoCrFeNi high entropy alloy: microstructure and mechanical properties. Mat Sci Eng A. 2017;679:299–313. doi: 10.1016/j.msea.2016.09.062
23.
SoareV.Electrochemical deposition and microstructural characterization of AlCrFeMnNi and AlCrCuFeMnNi high entropy alloy. Appl Surf Sci. 2015;358:533–539. doi: 10.1016/j.apsusc.2015.07.142
24.
VeronesiP, . Microwave assisted synthesis of Si-modified Mn25FexNi25Cu(50−x) high entropy alloys. Mater Lett. 2016;162:277–280. doi: 10.1016/j.matlet.2015.10.035
25.
VeronesiP, . Microwave processing of high entropy alloys: a powder metallurgy approach, accepted chemical engineering and processing: process intensification – In Press, Corrected Proof. [cited 2017 March 9]. Available from: https://doi.org/10.1016/j.cep.2017.02.016
26.
ColombiniE, . High entropy alloys obtained by field assisted powder metallurgy route: SPS and microwave heating. Mater Chem Phys, Accepted. [cited 2017 July 1]. Available from: https://doi.org/10.1016/j.matchemphys.2017.06.065
27.
VeronesiP, . Microwave-Assisted preparation of high entropy alloys. Technologies. 2015;3:182–197. doi: 10.3390/technologies3040182
28.
ZhangC, . Understanding phase stability of Al-Co-Cr-Fe-Ni high entropy alloy. Mater Des. 2016;109:425–433. doi: 10.1016/j.matdes.2016.07.073
29.
MetaxasAC, MeredithRJ.Industrial microwave heating, IEE power engineering series 4, Published by Peter Peregrinus Ltd., 1983, Section 7.2, London: UK.
30.
CannilloV, . Mechanical performance and fracture behaviour of glass-matrix composites reinforced with molybdenum particles. Compos Sci Technol. 2005;65(7–8):1276–1283. doi: 10.1016/j.compscitech.2004.12.035
31.
PengY, MiaoH, PenZ.Development of TiCN-based cermets: mechanical properties and wear mechanism. Int J Refract Met H. 2013;39:78–89. doi: 10.1016/j.ijrmhm.2012.07.001
32.
RogalL, . Effect of SiC nano-particles on microstrucutre and mechanical properties of the CoCrFeMnNi high entropy alloy. J Alloys Compd. 2017;708:344–352. doi: 10.1016/j.jallcom.2017.02.274
33.
Penchal ReddyaM, . Structural and mechanical properties of microwave sintered alsingle bondNi50Ti50 composites. J Sci: Adv Mater Dev. 2016;1(3):362–366.
34.
Habibur RahmanM, Mamun Al RashedHM.Characterization of silicon carbide reinforced aluminum matrix composites. Procedia Eng. 2014;90:103–109. doi: 10.1016/j.proeng.2014.11.821
35.
MCColmIJ.Ceramic science for materials technologists. London: Leonard Hill; 1983, p. 239–423.
36.
BodukuriaAK, . Fabrication of Al–SiC–B4C metal matrix composite by powder metallurgy technique and evaluating mechanical properties. Perspect Sci. 2016;8 :428–431. doi: 10.1016/j.pisc.2016.04.096
37.
TishchenkoIY, IlchenkoOO, KuzemaPO.TGA-DSC-MS analysis of silicon carbide and of its carbon-silica precursor, chemistry. Phys Technol Surf. 2015;6 (2):216–223.
38.
PanY, BaptistaJL.Chemical instability of silicon carbide in the presence of transition metals. J Ceram Soc. 1996;79(8):2017–2026. doi: 10.1111/j.1151-2916.1996.tb08932.x
39.
NegitaK.Effective sintering aids for silicon carbide ceramics: reactivities of silicon carbide with various additives. J Am Ceram Soc1986;69(12):C-308–C-310. doi: 10.1111/j.1151-2916.1986.tb07398.x
OliverWC, PharrGM.An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7:1564–1583. doi: 10.1557/JMR.1992.1564
42.
KumarA.Analysis of Si addition on phase formation in AlCoCrCuFeNiSix high entropy alloys. Mater Lett. 2017;188:73–76. doi: 10.1016/j.matlet.2016.10.099
43.
ParkJS, LandryK, PerepezkoJH.Kinetic control of silicon carbide/metal reactions. Mater Sci Eng A. 1999;259(2):279–286. doi: 10.1016/S0921-5093(98)00899-5
