The rate-dependence of hardmetal powder pressing in cutting insert production is investigated experimentally and numerically. In the latter case, the finite element method is relied upon using a continuum mechanics approach. In particular, possible rate-dependency due to creep deformation and rate-dependent friction is discussed with the experimental investigation focusing mainly on dimensional changes during sintering but also pressing forces. The results indicate that rate-dependent frictional effects are the dominating feature and accordingly, it can be argued that for the metal powders investigated here, creep deformations do not have to be accounted for in the constitutive description at the timescales relevant for powder pressing and when the shape after sintering is concerned. For the present powder, the apparent frictional effect decreases at higher pressing rates. Additional details of the friction behavior are studied comparing finite element simulations with experiments.
BrandtJ, NilssonL.Simulating the powder compaction and sintering of cemented carbides with a unified FE-tool, On constitutive modelling of the compaction and sintering of cemented carbides, Linköping Studies in Science and Technology [dissertations No. 521]. Linköping, 1998.
MartinCL, BouvardD. Study of the cold compaction of composite powders by the discrete element method. Acta Mater.2003;51:373–386. doi: 10.1016/S1359-6454(02)00402-0
4.
OlssonE, LarssonP-L. A numerical analysis of cold powder compaction based on micromechanical experiments. Powder Technol.2013;243:71–78. doi: 10.1016/j.powtec.2013.03.040
5.
OlssonE, LarssonP-L. Micromechanical investigation of the fracture behavior of powder materials. Powder Technol.2015;286:288–302. doi: 10.1016/j.powtec.2015.08.018
6.
HarthongB, JérierJ-F, DorémusP, ImbaultD, DonzéF-V.Modeling of high density compaction of granular materials by the discrete element method. Int J Solids Struct.2009;46(18–19):3357–3364. doi: 10.1016/j.ijsolstr.2009.05.008
7.
HarthongB, JérierJ-F, RichefeuV, ChareyreB, DorémusP, ImbaultD, DonzéF-V.Contact impingement in packings of elastic-plastic spheres, application to powder compaction. Int J Mech Sci.2012;61(1):32–43. doi: 10.1016/j.ijmecsci.2012.04.013
8.
BrandtJ, NilssonL.A constitutive model for compaction of granular media with account for deformation induced anisotropy. Mech Cohesive Frictional Mater.1999;4:391–418. doi: 10.1002/(SICI)1099-1484(199907)4:4<391::AID-CFM68>3.0.CO;2-0
9.
HäggbladH-Å.Constitutive models for powder materials. Powder Technol.1991;67:127–137. doi: 10.1016/0032-5910(91)80149-D
10.
GethinDT, SolimanjadN, DoremusP, KorachkinD.Friction and its measurement in powder-compaction processes. in ‘Modelling of powder die compaction’:122–125; 2008, London, Springer.
11.
GuyoncourtDMM, TweedJH, GoughA, DawsonJ, PaterL.Constitutive data and friction measurements of powders using instrumented die. Powder Metall.2001;44(1):25–33. doi: 10.1179/003258901666130
12.
KumorDR, Krishna KumorR, PhilipPK.Simulation of dynamic compaction of metal powders. J Appl Phys.1999;85(2):767–775. doi: 10.1063/1.369158
13.
StrijbosS.Powder-wall friction: The effects of orientation of wall grooves and wall lubricants. Powder Technol.1977;18(2):209–214. doi: 10.1016/0032-5910(77)80010-7
14.
SamuelssonP, BolinB.Experimental studies of frictional behavior of hard metal powder sliding on cemented carbide walls. Scand J Metall.1983;12:315–322.
15.
WagnerJG.The frictional behavior of tungsten and molybdenum powders sliding on die materials. Powder Technol.1983;35(1):47–50. doi: 10.1016/0032-5910(83)85025-6
16.
RoureS, BouvardD, DorémusP, PavierE.Analysis of die compaction of tungsten carbide and cobalt powder mixtures. Powder Metall.1999;42(2):164–170. doi: 10.1179/003258999665521
17.
StafH, AnderssonDC, LindskogP, LarssonP-L. On the influence of material parameters in a complex material model for powder compaction. J Mater Eng Perform.2016;25(10):4408–4415. doi: 10.1007/s11665-016-2294-y
18.
AnderssonDC, LarssonPL, CadarioA, LindskogP.On the influence from punch geometry on the stress distribution at powder compaction. Powder Technol.2010;202(1–3):78–88. doi: 10.1016/j.powtec.2010.04.016
19.
LindskogP, AnderssonDC, LarssonP-L.An experimental device for material characterization of powder materials. J Test Eval.2013;41(3):504–516. doi: 10.1520/JTE20120107
20.
AnderssonDC, LindskogP, LarssonP-L.Inverse modeling applied for material characterization of powder materials. J Test Eval.2015;43:1005–1019. doi: 10.1520/JTE20130266
21.
AnderssonDC, LindskogP, StafH, LarssonP-L.A numerical study of material parameter sensitivity in the production of hard metal components using powder compaction. J Mater Eng Perform.2014;23(6):2199–2208. doi: 10.1007/s11665-014-0989-5
22.
BriscoeBJ, RoughSL.The effects of wall friction in powder compaction. Colloids Surf A Physicochem Eng Asp.1998;137(1–3):103–116. doi: 10.1016/S0927-7757(97)00210-0
23.
JonsénP, HäggbladH-Å.Modelling and numerical investigation of the residual stress state in a green metal powder body. Powder Technol.2005;155(3):196–208. doi: 10.1016/j.powtec.2005.05.056
24.
HallqvistJO.LS-Dyna Theory Manual. Livermore, LSTC, 2006.
25.
‘LS-Dyna Keyword User's Manual II, material models', 1278–1284; 2016, Livermore, LSTC, 7122.
