The behaviour of austenitic stainless steel powder column during uniaxial cold compaction was investigated in this work. Powders with different particle size were compacted to the same green density in a hydraulic press, also providing different H/D ratios in order to account for the influence of geometry. The analysis of the data continuously recorded by the press allowed distinguishing the contribution of the reversible phenomena (elastic deformation of powders and tools) and of the irreversible phenomena (rearrangement and plastic deformation of the powders). An analytical model for densification was proposed, considering both density and increase in density versus the applied pressure. The trend of reversible and permanent deformations versus the applied pressure was evaluated, also proposing an analytical model. The comparison between the densification curves and the curves of permanent deformation allowed highlighting the physical meaning of the model describing the increase in density for the different particle size.
GermanR. M.: ‘Green body homogeneity effects on sintered tolerances’, Powder Metal., 2004, 47, (2), 157–160. doi: 10.1179/003258904225015563
2.
CocksA. C. F.: ‘Constitutive modelling of powder compaction and sintering’, Prog. Mater. Sci., 2001, 46, 201–229. doi: 10.1016/S0079-6425(00)00017-7
3.
RossiP., AlvesM. K. and Al-QureshiH. A.: ‘A model for the simulation of powder compaction processes’, J. Mater. Process. Technol., 2007, 182, 286–296. doi: 10.1016/j.jmatprotec.2006.08.011
4.
SmithL. N., MidhaP. S. and GrahamA. D.: ‘Simulation of metal powder compaction, for the development of a knowledge based powder metallurgy process advisor’, J. Mater. Process. Technol., 1998, 79, 94–100. doi: 10.1016/S0924-0136(97)00387-7
5.
CoubeO. and RiedelH.: ‘Numerical simulation of metal powder die compaction with special consideration of cracking’, Powder Metal., 2000, 43, (2), 123–131. doi: 10.1179/003258900665871
6.
CoubeO., CocksA. C. F. and WuC. Y.: ‘Experimental and numerical study of die filling, powder transfer and die compaction’, Powder Metal., 2005, 48, (1), 68–76. doi: 10.1179/003258905X37585
WikmannB., SolimannezhadN., LarssonR., OlderburgM. and HaggbladH. A.: ‘Wall friction coefficient estimation through modelling of powder die pressing experiment’, Powder Metal., 2000, 43, (2), 132–138. doi: 10.1179/003258900665880
9.
ErnstE. and BarnekowD.: ‘Pressure, friction and density during axial powder compaction’, Proceedings ‘PM'94 Powder Metallurgy World Congress’, Paris, France, 6–9 June 1994, EPMA, Shrewsbury (UK), 1994, 673–676.
10.
Al-QureshiH. A., GaliottoA. and KleinA. N.: ‘On the mechanics of cold die compaction for powder metallurgy’, J. Mater. Process. Technol., 2005, 166, 135–143. doi: 10.1016/j.jmatprotec.2004.08.009
11.
Al-QureshiH. A., SoaresM. R. F., HotzaD., AlvesM. C., KleinA. N.: ‘Analyses of the fundamental parameters of cold die compaction of powder metallurgy’, J. Mater. Process. Technol., 2008, 199, 417–424. doi: 10.1016/j.jmatprotec.2007.08.030
12.
BocchiniG. F.: ‘Friction on punch faces and its effect on the Green density of PM parts’, Proceedings ‘PM ’94 Powder Metallurgy World Congress’, Paris, France, 6–9 June 1994, 1994, EPMA, Shrewsbury (UK), 741–744.
13.
PoquillonD., LemaitreJ., Baco-CarlesV., TailhadesPh. and LacazeJ.: ‘Cold compaction of iron powders-relation between powder morphology and mechanical properties. Part I: Powder preparation and compaction’, Powder Technol., 2002, 126, 65–74. doi: 10.1016/S0032-5910(02)00034-7
14.
OlssonE. and LarssonP. L.: ‘On the effect of particle size distribution in cold powder compaction’, J. Appl. Mech., 2012, 79, 051017, 1–8. doi: 10.1115/1.4006382
15.
GermanR. M., MaJ., WangX. and OlevskyE.: ‘Processing model for tungsten powders and extension to nanoscale range’, Powder Metal., 2006, 49, (1), 19–27. doi: 10.1179/174329006X94690
16.
OlevskyE. and MaximenkoA.: ‘Nonstationary problems of the quasistatic theory of hardening plastic bodies’, Comput. Mater. Sci., 1994, 3, (2), 247–253. doi: 10.1016/0927-0256(94)90139-2
17.
Rong-deG.: ‘A new powder compaction equation’, Int. J. Powder Metal., 1991, 27, (3), 211–216.
18.
SecondiJ.: ‘Modelling powder compaction – from a pressure–density law to continuum mechanics’, Powder Metal., 2002, 45, (3), 213–217. doi: 10.1179/003258902225006943
19.
AryanpourG. and FarzanehM.: ‘Application of a piston equation to describe die compaction of powders’, Powder Technol., 2015, 277, 120–125. doi: 10.1016/j.powtec.2015.02.032
20.
CristofoliniI., PillaM., BelluzziD., CrocettiM. and MolinariA.: ‘Experimental study of sizing of gears by a hydraulic press proceedings EURO PM2012 congress & exhibition, basel 16–19 September 2012’, ed. EPMA, Shrewsbury (UK), 1, 501–506.
21.
CristofoliniI., PillaM., BelluzziD., PederziniG., CrocettiM. and MolinariA.: ‘Influence of the scatter of sintered height on the precision of Parts sized by a hydraulic press’, CD Proc. ‘Euro PM2013 Congress & Exhibition’, Gotheborg, Sweden, 15–18 September 2013.
22.
CristofoliniI., FontanariV., BelluzziD., PederziniG. and MolinariA.: ‘Experimental study of the relationships between sizing force and deformation of sintered parts to define a process control procedure’, Powder Metal., 2014, 57, (5), 394–400. doi: 10.1179/1743290114Y.0000000106
23.
CristofoliniI., MolinariA., BelluzziD., PederziniG. and FedericiM.: In Situ analysis of the powder behaviour during cold compaction, CD Proc. ‘Euro PM2014 Congress & Exhibition’, Salzburg, Austria, 21–24 September, 2014.
24.
CristofoliniI., MolinariA., PederziniG., PivaM. and GrandiA.: ‘From experimental data an analytical model of powder behavior during uniaxial cold compaction’, proceedings ‘PowderMet 2015’, San Diego, CA, 17–20 May 2015, 1, 19–30.
