Illusory Contours Do Not Capture Stereopsis—They Just Constrain the Depth Spreading

Abstract

If vertical cut-out sectors defining a Kanizsa square are given crossed disparity, the illusory figure appears in depth. Such an illusory figure can pull the background pattern inside the illusory figure to the same depth. It has been assumed that illusory contours are necessary for this phenomenon, which is called stereo capture (Ramachandran, 1986 Perception & Psychophysics 39 361 – 373). However, we noticed that the vertical cut-out sectors of the inducing figures (‘pacmen’) are not the only structures that can capture the background texture. The rows of background dots that are enclosed between the disparate vertical cut-out sectors also have unambiguous stereoscopic depth. Thus it might be possible that the disparate rows alone capture the background texture. To investigate our hypothesis we created a stereogram in which the inducing figures were removed. It consisted of a dotted background texture and four areas devoid of dots. The dotless areas corresponded to the areas which were occluded by the original inducing figures. Because of this, the top and bottom rows inside the central area were in crossed disparity.

According to our results (a) depth capture also occurred without illusory contours; (b) when illusory contours were not present, the depth of the disparate rows spread more often to other areas. Usually the depth spread first to the central area of the figure and after that horizontally to other areas of the figure. Therefore, we conclude that illusory contours do not capture stereopsis—they just constrain the depth spreading.