Laser Soldering and Welding for Ossicular Reconstruction: An in Vitro Test

Abstract

To evaluate the possibility of laser application in ossicular reconstruction, soldering and welding of bony tissue with proteineous materials was performed by using a Co₂ laser, and the bonding strength of these materials was measured with a gradual weighing system. The soldered and welded surface of bone was observed with a scanning electron microscope. Additionally, welding of human ossicles and synthetic materials was experimentally tried with lasers, and morphologic changes were observed and recorded. A scanning electron microscopic examination was also done. A 40% albumin solution and commercial fibrin glue showed the best bonding strength. Bridging of denatured protein solder may be a mechanism of bonding. Polycel was melted by using a laser beam, and melted Polycel covered the surface of the ossicle. However, the bonding strength was not enough to use, and exact measurement of bonding strength was not possible. These results suggested the possibility of laser soldering and welding in ossicular reconstruction, especially with ossicle or cortical bone.