Scaling Marker Position Determines the Accuracy of Digital Templating for Total Hip Arthroplasty

Abstract

Background

Digital templating systems foster patient-specific measurements for preoperative planning.

Questions/Purposes

We aim (1) to verify the accuracy of a templating system, (2) to describe the effects of scaling marker position on the accuracy of digital templating of the hip, and (3) to provide a practical guide for scaling marker position using patient body mass index (BMI).

Methods

A scaling sphere was placed in five positions along the anterior-posterior axis of an acetabular implant and pelvis phantom, and x-rays were obtained. Each radiograph was templated for the acetabular component and recorded. A retrospective review identified CT scans of preoperative hip arthroplasty cases. The center of the greater trochanter was calculated from these CT scans as the percent distance from the anterior thigh and recorded with the patient's BMI.

Results

By centering the scaling sphere on the acetabular component, an accurate cup size was achieved. A difference of 3.5 cm in sphere placement resulted in a full cup size magnification error. Positioning the scaling sphere at the level of the pubic symphysis resulted in a difference of four cup sizes. This patient population had an average BMI of 28.72 kg/m² (standard deviation 6.26 kg/m²) and an average position of the center of the greater trochanter of 51% (standard deviation of 6%) from the anterior surface of thigh.

Conclusions

Digital templating relies on scaling marker position to accurately estimate implant size. Based on the findings in this study, scaling markers for hip imaging should be placed laterally, mid-thigh in the anterior-posterior direction for patients with a BMI between 25 and 40 kg/m². If abnormal hip anatomy or extremes of BMI are discovered, then scaling sphere positioning should be optimized on a case-by-case basis. Digital templating systems for total hip arthroplasty must use precisely placed scaling markers at the level of the hip joint to allow for accurate implant size estimation.