Search results: Sage Journals

Restricted accessResearch articleFirst published June, 2011

In-cylinder flow control in a four-valve spark ignition engine: numerical and experimental steady rig tests

D Ramajo, A Zanotti, N Nigro

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Restricted accessResearch articleFirst published June, 2002

New evaluation indices for bulk motion of in-cylinder flow through intake port system in cylinder head

J-E Yun

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Restricted accessResearch articleFirst published May, 2005

Study of the influence of nozzle seat type on injection rate and spray behaviour

V Bermúdez, R Payri, F J Salvador [...]

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Restricted accessResearch articleFirst published September, 1967

Report 17: Design of a Test Rig to Assess the Effect of Three Loading Parameters on Rolling-Bearing Performance

D. B. Jones, E. D. Yardley

Proceedings of the Institution of Mechanical Engineers,Conference Proceedings

Restricted accessResearch articleFirst published June, 2007

Rail corrugation formation studied with a full-scale test facility and numerical analysis

X Jin, Z Wen

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published May, 2013

A linear actuated chain test rig capable of accelerated test speeds and continuous wear measurements

Stuart C Burgess, Torquil Pyper, Chung Seng Ling

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published March, 2009

Alternative method to evaluate discharge coefficients. Part 2: Case study

R I Gault, D J Thornhill, R Fleck

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published March, 1998

Theoretical and experimental study of a fluidic device as a fuel injector for natural gas engines

R Chen, Q Huang, G. G. Lucas

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Restricted accessResearch articleFirst published January, 1969

Measurement of Vehicle Handling by Tethered Testing

N. F. Barter

Proceedings of the Institution of Mechanical Engineers: Automobile Division

Restricted accessReview articleFirst published July, 1993

Mechanisms of Heat Transfer to Liquid Films in the Manifold of Port-Injected Petrol Engines

N Ladommatos

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Restricted accessResearch articleFirst published June, 2011

In-cylinder flow control in a four-valve spark ignition engine: numerical and experimental steady rig tests

D Ramajo, A Zanotti, N Nigro

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Restricted accessResearch articleFirst published June, 2002

New evaluation indices for bulk motion of in-cylinder flow through intake port system in cylinder head

J-E Yun

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Restricted accessResearch articleFirst published May, 2005

Study of the influence of nozzle seat type on injection rate and spray behaviour

V Bermúdez, R Payri, F J Salvador [...]

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Restricted accessResearch articleFirst published September, 1967

Report 17: Design of a Test Rig to Assess the Effect of Three Loading Parameters on Rolling-Bearing Performance

D. B. Jones, E. D. Yardley

Proceedings of the Institution of Mechanical Engineers,Conference Proceedings

Restricted accessResearch articleFirst published June, 2007

Rail corrugation formation studied with a full-scale test facility and numerical analysis

X Jin, Z Wen

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published May, 2013

A linear actuated chain test rig capable of accelerated test speeds and continuous wear measurements

Stuart C Burgess, Torquil Pyper, Chung Seng Ling

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published March, 2009

Alternative method to evaluate discharge coefficients. Part 2: Case study

R I Gault, D J Thornhill, R Fleck

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published March, 1998

Theoretical and experimental study of a fluidic device as a fuel injector for natural gas engines

R Chen, Q Huang, G. G. Lucas

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Restricted accessResearch articleFirst published January, 1969

Measurement of Vehicle Handling by Tethered Testing

N. F. Barter

Proceedings of the Institution of Mechanical Engineers: Automobile Division

Restricted accessReview articleFirst published July, 1993

Mechanisms of Heat Transfer to Liquid Films in the Manifold of Port-Injected Petrol Engines

N Ladommatos

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering