Sage Journals: Discover world-class research

Retricted access

Research article

First published 2026-3

Surface/Interface behaviour of atmospheric plasma sprayed NiTi alloy on stainless steel with the variation of critical plasma spray parameter

Rakesh Roshan, Swadhin Kumar Patel, Priyabrata Mallick [...]

Materials Science and Technology

Retricted access

Research article

First published 2013-5

Influence of plasma spraying parameters on properties of thermal barrier coatings

M R Mrdak, A Vencl, B D Nedeljkovic [...]

Materials Science and Technology

Retricted access

Research article

First published 2025-9

Research on multi-pass multi-parameter coating thickness distribution model for robotic spraying process on gas turbine blades

Xuejian Zhang, Yucong Fu, Xiaobing Hu [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2026-2

Influence of alternative fuel from waste plastic oil on the macroscopic spray parameters utilising a single injection strategy in a piezoelectric diesel injector

José M Riesco-Ávila, Oscar A de la Garza, James R Vera-Rozo [...]

International Journal of Engine Research

Retricted access

Research article

First published 2021-5

Influence of parameters on the cold spraying FeCoCrMoBCY amorphous coatings

Zhizhong Wang, Li Ma, Bin Han [...]

Surface Engineering

Retricted access

Research article

First published 2023-12

Study of Low-Pressure Cold Spray Additive Manufacturing: Investigation of Kinematic Spray Parameters on Deposition and Properties

Wenbo Li, Hongjian Wu, Christophe Verdy [...]

3D Printing and Additive Manufacturing

Retricted access

Review article

First published 2021-7

Performance of thermal-sprayed coatings to combat hot corrosion of coal-fired boiler tube and effect of process parameters and post-coating heat treatment on coating performance: a review

Santosh Kumar, Amit Handa, Vikas Chawla [...]

Surface Engineering

Retricted access

Research article

First published 2013-2

Effect of geometric parameters on the spray cone angle in the pressure swirl injector

Juan Liu, Xin-Qiao Zhang, Qing-Lian Li [...]

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Retricted access

Research article

First published 2019-9

Effect of geometric and operating parameters on the spray characteristics of an open-end swirl injector

Chen Chen, Yang Yang, Xiaorong Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Retricted access

Research article

First published 2025-11

Optimization of spray breakup model parameters for predicting fuel spray and film characteristics in gasoline direct injection engines

Hao-Pin Lien, Diego Bestel, Le Zhao [...]

International Journal of Engine Research

Search results