Sage Journals: Discover world-class research

Retricted access

Research article

First published 2022-5

Using variable modulus to modify a rack cutter and generate a gear pair

Yang Hsueh-Cheng, Zhong-Wei Huang

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2022-6

Double modification of a rack cutter using a variable pressure angle and modulus

Hsueh-Cheng Yang

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2006-8

Generating standard 20° involute pinions with increased fillet strength by using 25° rack cutters with non-standard module

C Spitas, V Spitas

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2016-4

Optimization of fillet stress to enhance the bending strength through non-standard high contact ratio spur gears

P Marimuthu, G Muthuveerappan

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2025-1

A novel design approach based on sequential-conjugate method for high-mesh-ratio harmonic drives with dual-conjugate profiles and polynomial wave generators

Chung-Yu Tsai, Ya Chin Chang

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2019-11

A parametric analysis of the surface roughness of teeth shaped by a pinion shaper cutter and guidelines for choosing process parameters

Mattias Svahn

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2021-1

Estimation of loss factor based on the load share model in improved bending strength spur gear drive system

R Ravivarman, R Prabhu Sekar

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2017-12

Kinematic performance of a parabolic gear tooth with two parabolic coefficients

Hsueh-Cheng Yang, P Frank Pai

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2020-4

A helical gear with discrete ring-involute teeth

Hsueh-Cheng Yang, Wen-Jun Liang

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 1983-10

Effect of Top-Relief and Rake Angles on the Gear Shaping Cutter Profile

N Srinivasan, M S Shunmugam

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results