Sage Journals: Discover world-class research

Retricted access

Research article

First published 2009-4

Rheology and high-pressure models for quantitative elastohydrodynamics

S Bair

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2015-8

An experimental and modeling assessment of the HCFC-R123 refrigerant capabilities for lubricating rolling EHD circular contacts

Philippe Vergne, N Fillot, N Bouscharain [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2016-3

Quantitative elastohydrodynamic film forming for a gear oil with complex shear-thinning

Scott Bair, Wassim Habchi, Petr Sperka [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2025

The high-pressure rheology of gear oils

Scott Bair

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2021-4

A comparison of measured film thicknesses with quantitative predictions from an elastohydrodynamic,perturbation analysis at high slide-roll ratios

Chris Hooke, Petr Šperka, Scott Bair [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Other

First published 2010-12

Dependence of the dynamic properties of elastohydrodynamic liquids on temperature and pressure (volume)

S Bair

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2024-5

Effects of a typical shear dependent viscosity on analytical elastohydrodynamic lubrication film thickness predictions: A critical issue for the classical approach

Scott Bair, Wassim Habchi

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2019-8

Theoretical analysis of a rolling-sliding elastohydrodynamic lubrication line contact with a subsurface inclusion

Armando Félix Quiñonez, Guillermo E Morales Espejel

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2026-1

A dynamic model for the frictional power loss analysis of a synchronous motor rotor-bearing system

Yajun Xu, Yang Yang, Jing Liu [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2025-9

Sealing characteristics and control strategies of hydraulically controllable rod seal for deep-sea hydraulic manipulators

Bingqing Wang, Xiaoxuan Li, Yu Liao [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results